Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Irving
If your gate motor in Irving is grinding, stalling, or simply dead, the answer is usually straightforward: a worn operator, a shifted post, or wiring that was undersized from the day the house went up. Gate motor and opener work across Irving, from the 75014 corridor through 75015 and 75016, runs between $180 for a basic limit-switch reset and $1,900 or more for a full operator replacement with a new control board. Most repairs we handle in Irving are completed in one visit. Call (817) 242-5426 and a live person will answer, day or night.
Ironworks Gate Co. has been doing this work for over 42 years. We know which neighborhoods in Irving have the oldest operators, which ones fight the black clay soil, and which HOA communities require specific documentation before we turn a single bolt. That local knowledge matters when you need the gate working tonight.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Motor & Opener Company
Irving homeowners call us because we answer the phone. Not a voicemail, not an answering service. A live person, 24 hours a day, 7 days a week, ready to schedule Irving Gate Repair from the Las Colinas area to the North Irving neighborhoods of the 75016 zip code. We hold a 5-star reputation across Irving with a simple promise: the job is done right, or we come back and make it right. That is the 90-Day Done Right Promise, written and honored on every single job.
Our technicians work in uniform and pass background checks before they ever step onto your driveway. They arrive knowing the difference between a 1990s builder-grade Linear operator on a single-phase circuit and a modern LiftMaster unit that actually has the amperage it needs. More than one Irving homeowner has told us our tech spotted a problem the previous contractor missed entirely.
Victor Salinas leads our team, and he is the person who sets the standard: the 400th job gets the same care as the first. Our crews serve Irving from our Dallas-Fort Worth dispatch office, which means short call-to-arrival times without an Irving address pretending to be a local headquarters.
Our Gate Motor & Opener Services in Irving
Motor Installation
Gate Installation in Irving means more than bolting on a box and programming a remote. We size the operator to the actual gate leaf weight and the condition of the wiring that feeds it. In Las Colinas communities with original 1980s and 1990s gate infrastructure, we frequently run new conduit and heavier-gauge wiring because the existing single-phase supply was never intended for modern operator loads. Most installations are measured, quoted, and scheduled within a week. Expect a written price before any work begins.
Motor Repair
If the motor hums but the gate does not move, or the gate opens partway and stops, the fault is often the control board, a worn capacitor, or a binding hinge post overloading the motor. Repair in Irving typically runs $180 to $485, and we carry common boards, limit switches, and gear kits on the truck so most fixes happen the same day. We service operators from Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule.
Linear Motor
Linear motors on Irving slide gates fail most often at the drive gear and the limit assembly, especially on heavy ornamental iron gates mounted close to the roadway where dust and summer heat cycle the components hard. We replace the drive unit and recalibrate the travel limits so the gate stops correctly without smacking the end stop or reverse-triggering the safety photocell. That work in Irving usually runs $210 to $520 depending on the model.
Slide Motor
Slide motor replacement in Irving is most common on the wider driveways of the Las Colinas-era homes built between the 1980s and 2000s. Those gates need more torque than a swing gate, and a motor that was marginal on day one will not last two North Texas summers. We install appropriately rated motors, check the roller trucks and end stops, and set limit switches so the gate parks exactly where it should.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We are trained and equipped on nine major gate-automation brands, and for Irving Gate Parts & Welding we keep common parts for Viking, Ghost Controls, and DoorKing stocked on our service trucks, along with Elite and the other brands we carry. That means a technician can often complete a repair in one visit without waiting on a parts shipment. If your Irving home has an older operator that a generalist contractor will not touch, call us first. We will either repair it correctly or give you an honest replacement recommendation with a written price.
Common Gate Motor & Opener Problems We See in Irving Homes
- Undersized wiring feeding modern motors. Builder-grade operators installed in 2000s Las Colinas subdivisions were wired for the loads of twenty years ago. When a new LiftMaster or FAAC unit goes on that same circuit, the wiring overheats, voltage droops, and control boards burn out. We correct the power run before installing the new operator.
- Shifted hinge posts from black clay soil. North Texas clay swells in spring and contracts during summer drought. That seasonal movement pushes pilaster-mounted swing gate posts out of plumb, binds the gate leaf, and overloads the motor until the limits are reset. In Irving, we often reset or reinforce the footing and recalibrate limits twice a year on affected properties.
- Photo-eye false triggers on south- and west-facing gates. Summer heat exceeds 100°F in Irving, and operators mounted on unshaded pilasters develop clouded photo-eye lenses and failing boards. A gate that reverses for no visible reason is often a heat-stressed photocell or a board beginning to fail from thermal cycling.
- Missing conduit runs from manual-gate installations. Many Irving homes in the 75015 and 75016 zip codes started with manual gates and added automation later. The original build often left no conduit between the house and the gate. We trench and run proper conduit rather than laying wire across flower beds or running it along a fence line where a string trimmer will find it.
Pricing for Gate Motor & Opener in Irving, TX
Here is what Irving homeowners can expect to pay. A limit-switch adjustment or photocell alignment runs $120 to $180. A control board replacement on a common residential operator runs $240 to $480. A full operator replacement, including motor, arm, and board, runs $850 to $1,900 depending on gate size and brand. Battery backup retrofits on existing slide or swing operators run $350 to $650, including the battery, mounting, and wiring. New conduit and power runs, when needed, add $18 to $35 per linear foot to the job.
Every price is quoted and agreed in writing before any work starts. Never a surprise bill. We offer a free second opinion on any written estimate, and a $89 seasonal tune-up that catches small problems before they become summer breakdowns. Senior and Veteran customers always receive 5% off.
We Also Serve Cities Near Irving
Our Gate Motor & Opener team covers Irving alongside Coppell, Euless, Grapevine, and Bedford. If you live in one of those cities and need a gate motor repaired or replaced, the same live-answer phone line and the same 90-Day Done Right Promise apply. Call (817) 242-5426 for scheduling.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Irving
The most common cause we find is undersized single-phase wiring from the original build, combined with a south- or west-facing operator that runs hot all day. The motor draws more current than the circuit is meant to supply, the wiring heats up, voltage sags, and the control board takes the hit. The fix is usually a heavier-gauge power run and a properly rated operator. Call (817) 242-5426 and we will assess the circuit before you buy another motor.
Yes, in most cases. If your slide operator has an accessible DC or 24V control circuit, we can retrofit a battery backup system for $350 to $650 without replacing the motor or the board. That keeps the gate operable during a North Texas thunderstorm power outage. We will check your existing operator’s compatibility and give you a written quote before any work begins.
The operator is not the expensive part of automating a manual gate. The cost is the power run, the conduit, the concrete pad for the motor, and the safety photocells. We can sometimes use a solar-charged or low-voltage DC operator for gates far from the house, but the honest answer is that a proper automation kit with installation in Irving runs $1,100 to $2,400 depending on the gate. We will give you a clear line-item price, not a vague number.
Often yes. Las Colinas HOA architectural control committees frequently specify approved operator brands, black powder-coat finishes, and masonry repair methods. We work with those ACC requirements and can prepare the documentation your HOA needs. We have handled fillings and approvals across Las Colinas, and we will tell you upfront whether your project needs HOA review before any work starts.
The most common cause in Irving is a clouded lens from heat and dust, followed by a misaligned photocell or a failing board. We see this most often on south-facing gates where the unshaded mounting surface exceeds 100°F through the summer. The fix might be a $120 lens cleaning and alignment, or a $240 board replacement if the thermal cycling has done its damage. Call (817) 242-5426 and we will diagnose it properly.
Call Ironworks Gate Co. for Gate Motor & Opener Service in Irving
We pulled into a Las Colinas subdivision off MacArthur Boulevard where a dual swing gate had stopped responding mid-cycle. The original 1990s Linear operator still had power, but the hinge post on the right leaf had shifted in the black clay soil, throwing the alignments out and binding the arm. We installed a post footing reinforcement and recalibrated the limit switches, so the gate clears the safety photocells without false triggers. That is the kind of problem you cannot diagnose from a phone call, and it is exactly what we do in Irving every week.
If your gate motor is failing, call (817) 242-5426 for a free estimate. We are the gate specialists in Irving for Gate Motor & Opener work, and we stand behind every job with the 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the surrounding DFW communities.