Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Colleyville Homeowners
When a gate motor fails in Colleyville, it rarely gives much warning. One morning you press the remote and the gate groans halfway, stops, and refuses to budge. Now the driveway is blocked, the car is stuck, and the day’s schedule just fell apart. That’s exactly when a live voice on the phone matters. Call (817) 242-5426 and you’ll get a real person at Ironworks Gate Co., not a voicemail tree. We’ve been repairing and replacing gate motors and openers across Colleyville for over 42 years, and most motor repairs are completed in a single visit. Victor Salinas and our technicians know the exact models installed in the gated communities and estate properties that line this city, from the tree-shaded streets near Colleyville Boulevard to the newer developments near Glade Road.
Colleyville Gate Motor & Opener service is not a side job for us. It’s the entire job. We repair, install, and upgrade automation on nine major opener brands, and every completed job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. Done right, and backed in writing.
What Our Gate Motor & Opener Service Includes
Motor Installation
A new gate motor installation means matching the right drive system to the weight, length, and cycle frequency of your gate. An undersized motor on an oversized gate will burn itself out within a few years. We measure the gate, assess the hinges and wheel hardware, and recommend a motor rated for how often the gate actually cycles each day. Installation includes mounting, wiring, travel limit adjustment, safety sensor setup, and a full demonstration before we leave your driveway.
Motor Repair
Emergency Gate Motor & Opener in Colleyville, TX repair is our most common same-day call. The symptom might be a gate that hums but doesn’t move, a motor that runs but the gate crawls, or a control board that clicks without engaging the drive. We diagnose the failure on site, show you exactly what failed and why, and quote the repair before any work begins. Most repairs are finished the same visit because our trucks carry the common failure parts for the brands we service.
Linear Motor
A linear motor operator is the long-arm piston drive you see on many swing gates. These units push and pull the gate leaf through a threaded or worm-drive piston, and when the internal limit switches or capacitor go out, the arm either over-travels or stalls mid-stroke. We service and replace linear actuators from the brands most common in Colleyville, including FAAC, BFT, and LiftMaster. The repair almost always costs less than replacing the entire operator, and we’ll tell you honestly which side of that line you’re on before quoting anything.
Slide Motor
Slide gate motors move a rolling gate leaf along a track, and they work hard. The drive gear, chain, and limit switch system all take steady wear in our Texas climate. In Colleyville’s summer heat, we replace stretched chains, worn nylon drive gears, and failing photo-eye sensors more than any other slide motor component. A slide gate that rattles or shudders as it moves is telling you something is loose or wearing out before it strands the gate fully open or fully closed.
Intercom Integration
Many Colleyville properties pair a gate motor with an intercom or video entry system, so guests can be buzzed in from the house. When we install or repair a motor, we verify the intercom relay wiring and open-command signal function correctly alongside the new or repaired automation. A motor that opens perfectly but won’t trigger from the house intercom is a job half done. We test both the gate operation and the intercom hand-off before we consider the visit finished.
Battery Backup
Power interruptions in north Texas come with spring storms and the occasional summer brownout. A gate motor without battery backup becomes a manual push-and-pull job the moment power drops, which is hard on the motor and tougher on you. We install and replace sealed battery units that keep your opener working through short outages. We also test existing batteries during every tune-up and replacement call, because most homeowners we meet have never checked the one sitting in their operator housing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We train our technicians, not third-party contractors, on Ghost Controls units because a large number of Colleyville and Grapevine properties use this brand on estate-style swing gates, making us the Best Gate Motor & Opener in Colleyville, TX choice for these systems. We stock Ghost Controls control boards, limit switch modules, and paired remotes, so when a Ghost Controls opener fails, the fix is usually made the same day rather than after a week of part lead times.
DoorKing and Elite operators appear throughout older Colleyville neighborhoods where swing and slide gates were installed in the 1990s and early 2000s, and we also service our Gate Motor & Opener in Bedford area customers with the same brands. These are workhorse motors, but their capacitors and limit systems age out. We carry OEM and matching-spec replacement parts for both brands. Mighty Mule openers are common on smaller residential gates across Colleyville, and we repair them honestly: when a Mighty Mule board fails, we’ll tell you whether a board swap or a full operator replacement makes more financial sense. Whether you have one of these brands or any other make, we can help. Our service trucks are stocked for the nine major opener brands we service, and what we don’t carry, we order the same day.
Signs You Need Gate Motor & Opener Right Now
- Gate moves slowly or pauses mid-travel. A healthy gate motor moves the leaf at a steady pace from fully open to fully closed without hesitation. When it slows or stops along the way, the motor is straining against binding hinges, low voltage, or a failing capacitor. Left alone, the strain burns out the motor entirely, which is a costlier repair than the fix would have been.
- Motor hums but the gate doesn’t move. That hum is the motor getting power and attempting to run. If the gate doesn’t respond, the drive gear, chain, or capacitor has failed. Continuing to press the remote against a stalled motor can damage the control board too. Cut power to the opener and call us before you try it again.
- Remote works only from close range. If you have to stand within ten feet of the gate for the remote to trigger, the opener’s receiver board or antenna is failing. This isn’t just an inconvenience. It means the signal path is degraded and will eventually quit altogether, locking the gate in whatever position it was in when the last signal went through.
- Gate slams or doesn’t stop at the proper position. When limit switches go bad, the motor doesn’t know when to stop. A gate that slams shut or over-travels past its stops is a safety and property damage risk, and the fix is usually a simple limit switch replacement inside the operator. This is not a job to put off.
- Circuit breaker trips when the gate operates. A breaker that trips every time the gate cycles signals an electrical short, a failing motor winding, or water intrusion in the operator housing. Any of these conditions can cause a fire. Shut the breaker off at the panel and leave it off until a technician has inspected the opener.
One warning on safety here. Gate motors and openers contain capacitors that hold a charge even after the unit is unplugged, and the moving gate leaf itself weighs hundreds of pounds. We recommend a trained professional for any work involving the motor, wiring, or control board. Our technicians discharge capacitors properly and follow manufacturer procedures on every call.
Our Gate Motor & Opener Process - Step by Step
- 1
Call and talk to a live person. You call (817) 242-5426, and a real person at Ironworks Gate Co. answers, day or night. Tell us the symptom and the gate style. We’ll schedule a visit for a time that works for you, including same-day for most motor failures.
- 2
On-site diagnosis. Our technician arrives in a uniform, introduces himself, and inspects the operator, wiring, safety sensors, and gate hardware. We use factory diagnostic procedures for your specific opener brand. You’ll hear the exact root cause explained in plain English before any work is authorized.
- 3
Upfront written quote. The price for the repair or installation is quoted and agreed before a single bolt is turned. No open-ended labor charges. No mystery fees on the invoice. A square deal: upfront price, no surprises on the bill.
- 4
Repair or installation completed. We carry the common failure parts for the brands we service on our trucks, so most motor repairs are finished in one visit, usually within an hour or two. Installation jobs are scheduled for a full half-day so there’s no rush and no corner cutting.
- 5
Testing and walkthrough. After the work is done, we cycle the gate through complete open and close runs at least a dozen times, test the safety reverse, and adjust travel limits. Then we walk you through everything: remote operation, manual release, battery backup status, and what to watch for. You get the 90-Day Done Right Promise in writing before we leave.
How Much Does Gate Motor & Opener Cost in Colleyville?
Gate motor and opener pricing in Colleyville depends on the type of failure or installation, but here are the ranges we see most often. A capacitor or limit switch replacement runs $180-$340. A control board replacement typically lands between $350 and $750, depending on the brand and board version. A complete motor and operator replacement, including installation and programming, starts around $1,100 for a basic residential opener and goes up to $3,800 or more for heavy-duty slide operators on long estate gates. Battery backup installation adds $250-$600, depending on the battery rating and enclosure work.
What affects the price: the drive type (linear vs. slide), the gate’s weight and length, the condition of the existing wiring, and the operator brand. A gate that needs new wiring run from the panel adds labor. A gate with rusted-through mounting brackets adds fabrication time. We quote all of this upfront, in writing, before any work starts.
How to avoid overpaying: get a quote that separates parts from labor, ask whether the technician stocks the brand you own before they arrive, and be wary of any quote that skips diagnosing the actual failed component in favor of a whole-system replacement. Our free estimates include the specific part number, the labor hours, and the total. If you’ve gotten a written estimate from another company, bring it in. We offer a free second opinion.
Gate Motor & Opener Near Colleyville - Our Service Area
Our service trucks run to Colleyville and the surrounding cities every day, including Bedford, Hurst, North Richland Hills, Richland Hills, Grapevine, Southlake, Euless, Keller, Watauga, Trophy Club, and Haltom City. From our shop, we reach most Colleyville properties within 60 to 90 minutes for same-day motor repair calls. We’ve served this part of Tarrant County since 1984, and we plan to be here for another forty years. If you’re just over the line, see Gate Motor & Opener in Bedford or Gate Motor & Opener in Hurst for service details in those cities.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Colleyville
A gate motor and opener is the powered drive unit that opens and closes a swing or slide gate automatically using a remote, keypad, or intercom command. The system includes the motor itself, a control board, limit switches, safety sensors, and usually a receiver for wireless remotes. In Colleyville, these systems are installed on everything from small driveway gates to long estate and community gates.
Most gate motor repairs take one to two hours on site once our technician arrives. Because our trucks carry common failure parts for the major brands, the majority of motor repair calls are completed in a single visit. Installation of a complete new operator typically takes a half-day, which allows time for testing and your walkthrough.
Gate motor repair in Colleyville typically runs $180-$750, depending on the failed component. A simple capacitor or limit switch is on the low end; a control board replacement is higher. A full operator replacement starts around $1,100 and goes up from there for heavy slide gates. Every quote is written and agreed before work begins. Call (817) 242-5426 for an exact quote and ask about the $50 off any repair over $250.
Yes, we service DoorKing, Ghost Controls, and Mighty Mule openers, along with LiftMaster, FAAC, BFT, Linear, Viking, and Elite. Our technicians are factory-trained on nine opener brands and we stock OEM and matching-spec parts for these systems on our trucks. Whatever brand is mounted on your gate, we can likely repair it on the first visit.
Yes, same-day service is available in Colleyville for gate motor failures, and we keep emergency response time within 60 to 90 minutes for most of the city. A stuck gate is a genuine emergency when it blocks the driveway, and our 24-hour phone line means a live person answers even on weekends and holidays. Call us and we’ll tell you honestly when a technician can be at your property.
Every gate motor repair and installation from Ironworks Gate Co. is covered by our written 90-Day Done Right Promise. If something isn’t right after the work, we come back and make it right, no paperwork, no arguing, no exceptions. We call it the Keystone Standard, and it’s applied to every job we complete.
Clear the area around the gate motor so the technician can access the operator housing, the control box, and the gate itself. If your gate is stuck closed and blocking a vehicle, leave it as it is. Don’t try to manually force the gate open because you can strip the internal limits and make the repair more involved. Have your remotes available so we can test and program them while we’re there.
Schedule Your Gate Motor & Opener Service in Colleyville Today
A gate motor that’s failing won’t fix itself, and a gate that’s stuck is a problem you’ll deal with every time you leave the house. Call Ironworks Gate Co. at (817) 242-5426 for a free estimate, a square deal, and a written guarantee that the job gets done right. Live people answer 24/7, we’re on call for Colleyville’s same-day motor repairs, and we stand behind every job with the 90-Day Done Right Promise. Backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville since 1984.