Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Colleyville Homeowners
A new driveway gate in Colleyville typically costs between $4,800 and $14,000 installed, depending on the gate style, material, and whether you’re adding automation. Most installations take one to two days on site once your gate is fabricated, and we quote every job in writing before any metal is cut. Since 1984, Ironworks Gate Co. has built and hung gates across Colleyville, Keller, Southlake, and Grapevine, and we back every Best Gate Installation in Colleyville, TX with our written 90-Day Done Right Promise. Call (817) 242-5426 and a live person answers, any hour, any day.
Victor Salinas leads our installation crews, and he still walks every job site himself. That’s the difference between a company that installs gates and a company that builds them to stay square and true for decades. If you’ve lived in your Colleyville home for twenty years and plan to stay another twenty, you want the last gate you’ll ever buy.
We invite you to explore our home page to see our full range of gate services, including Gate Installation in Bedford and Gate Installation in Hurst.
What Our Gate Installation Service Includes
Every gate we install in Colleyville is built or sourced for your specific opening, your driveway slope, and the way your family actually uses the property. We don’t pull a box off a shelf and hope it fits. Here’s what each type of installation involves.
Driveway Gate
A driveway gate secures the vehicle entrance to your property and is the most common gate we install in Colleyville, where long driveways and acreage lots are common east of 26. We measure your opening, check the grade and swing clearance, and recommend either a single swing panel or a double swing configuration based on your setback and traffic flow. Most driveway gates we install are steel or ornamental iron, built to handle North Texas wind loads without sagging at the hinges.
Pedestrian Gate
A pedestrian gate is a smaller, walk-through gate built into a fence line or alongside a driveway gate to keep people from having to open the big gate every time. In Colleyville neighborhoods like Montclair and Foxborough, we regularly install pedestrian gates with mechanical keypads or card readers so family members can come and go without a remote. We weld the frame square, set the post in concrete below the frost line, and adjust the latch so it closes quietly and stays shut.
Sliding Gate
A sliding gate rolls horizontally along a track or cantilever system instead of swinging outward, which makes it the right choice for Colleyville properties with short setbacks or steep driveway aprons. We’ve hung cantilever sliding gates on estates where a swing gate would drift shut on a hill, and track-style sliding gates on flatter lots where the driveway is close to the house. Every sliding gate we install gets a welded steel frame and roller trucks sized for the panel weight, not the minimum the manufacturer allows.
Swing Gate
A swing gate pivots on hinges mounted to the gate post or column, and it remains the most common style for Colleyville homes with traditional brick or stone entryways. We set the hinge posts in concrete, weld adjustable hinges so the gate can be trued up years later, and install a positive stop so the opener never overdrives the panel. If you’re converting an existing manual swing gate to automation, we check the post plumb and the panel weight before recommending an opener.
Double Gate
A double gate uses two panels that meet in the middle, often called a bi-parting gate, and it’s the go-to for Colleyville driveways wider than 14 feet. We build both panels to match, install a center catch and drop rod so the inactive leaf stays put, and sync the openers so both sides move without binding. Double gates need precise fabrication because a half-inch difference at the center shows up as a sagging gate within a year.
Security Gate
A security gate is designed to actually stop a vehicle, not just mark a boundary, and it’s a different build than a decorative gate. In Colleyville, we’ve installed reinforced steel security gates with welded pickets, anti-lift brackets, and heavy-duty operator arms for homeowners who want a real barrier at the street line. These gates get heavier posts, deeper concrete footings, and a safety edge or photo eye system so the operator reverses if anything is in the path.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
When we hang a new gate in Colleyville, the operator is just as important as the steel. We’re factory-trained and equipped to install and program automation from Ghost Controls, DoorKing, and Elite, among others. If your gate opener fails inside its expected service life, the gate itself is rarely the problem, and pairing the right operator with the right panel weight is where most installers go wrong.
We’ve installed Ghost Controls kits on lighter swing gates where the homeowner wants dependable battery backup without a dedicated electrical run. DoorKing operators show up regularly on Colleyville estate gates, and we stock their control boards and loop detectors so an installation doesn’t stall waiting on parts. Elite operators are our pick for heavy sliding gates, and we’ve tuned enough of them to know their limits by model number. Whether you have one of these brands or any other make, we can match the operator to the gate and wire it so it works the first time.
Signs You Need Gate Installation Right Now
- Your existing gate is leaning or dragging on the driveway. This means the hinge post is failing or the panel has warped past the point of adjustment. In Colleyville’s clay soil, posts shift with moisture cycles, and a leaning gate will eventually bind against the opener and burn out the motor.
- The gate won’t stay closed or won’t close all the way. This is usually a hinge wear issue or a panel that has twisted out of square. A gate that won’t latch leaves your property open overnight, and it’s a sign the structure is fatigued.
- You’re propping the gate open with a rock or a bungee cord. That’s a manual workaround for a gate that no longer operates safely. If you’re doing this, the gate isn’t securing anything, and the opener is likely fighting the load every cycle.
- The gate is rusted through at the bottom rail or hinge mounts. North Texas humidity and irrigation overspray accelerate rust on untreated steel. Once the bottom rail is compromised, the panel has lost its structural integrity and patching it is a temporary fix.
- You’ve replaced the opener twice and it’s failing again. This is the one we see most in Colleyville: a gate that’s too heavy or too wind-loaded for the operator. A new gate panel, properly fabricated and balanced, will let a correctly sized opener run for years without strain.
Our Gate Installation Process - Step by Step
- 1
Free site visit and measurement. We come to your Colleyville property, measure the opening, check the grade, and look at the existing posts or columns. Victor Salinas walks the site personally and asks about how you use the driveway: daily vehicles, RVs, trailers, delivery trucks. The quote that follows is written and itemized.
- 2
Design and material selection. We show you gate styles that match your home’s brick or stone, and we spec the steel gauge and wall thickness for the panel and posts. You choose the finish: powder coat, primer for painting, or a natural steel that will patina. Nothing is ordered until you approve the price in writing.
- 3
Fabrication and post setting. If we’re building a custom gate, our welders cut and weld the frame in our shop. On site, we dig post holes to depth, set the posts in concrete, and let the concrete cure before hanging the panel. A rushed install skips the cure time, and the gate sags.
- 4
Gate hanging and operator installation. We hang the panel, adjust the hinges so the gate swings true, and install the opener if you’re automating. We run the power conduit, mount the keypad or card reader, and set the safety edges and photo eyes. The gate gets tested through 10 full open and close cycles before we call it done.
- 5
Walkthrough and the 90-Day Done Right Promise. We walk the gate with you, show you how the manual release works, and answer every question. Your written guarantee is handed to you before we leave. If anything is not right in the first 90 days, we come back and make it right. No paperwork, no arguing.
How Much Does Gate Installation Cost in Colleyville?
In Colleyville, a single swing driveway gate in ornamental steel typically runs $4,800 to $8,500 installed without automation. A double swing gate or sliding gate runs $7,500 to $14,000 depending on width, steel gauge, and finish. Adding an operator and keypad adds $1,800 to $4,500 depending on the brand and whether we need to run a new electrical circuit. A pedestrian gate with a keypad is a smaller job, usually between $2,200 and $3,800.
What moves the price is the gate’s weight class, the post size required, and the amount of welding versus bolt-together assembly. Custom ornamental iron with scrollwork costs more than a standard ranch rail design. Automation can be wired into an existing circuit or we pull a dedicated line, which is cleaner and more reliable. You avoid overpaying by getting a written quote that separates materials, labor, and the operator, so you can see exactly where the money goes. Our estimates are free, and the price we quote is the price you pay. A live person answers at (817) 242-5426 around the clock if you want to talk through what a new gate would cost on your property.
Gate Installation Near Colleyville - Our Service Area
Ironworks Gate Co. installs gates throughout Colleyville and the surrounding communities, including Southlake, Grapevine, Keller, North Richland Hills, and Trophy Club. We also serve the wider region, so if you’re near Gate Installation in Colleyville and need a gate built in a neighboring city, we’ll be there when we say. If you need work done elsewhere in the metro, our Gate Installation in Bedford page covers that side of the service map. We schedule installations in the order calls come in, and most Colleyville homeowners get a site visit within the same week.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well, and we also offer our Gate Installation in Bedford. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Colleyville
Gate installation is the process of setting gate posts, hanging a gate panel, and optionally wiring an automatic opener and access control. At Ironworks Gate Co., Colleyville Gate Installation includes measuring your Colleyville driveway, fabricating or sourcing the correct panel, setting posts in concrete, hanging the gate square, and testing the full system. We handle the entire job from first measurement to final walkthrough.
Most Colleyville gate installations take one to two days on site once the gate is fabricated and ready. Custom gates with ornamental work may take two to three weeks in the shop before installation day. We give you a written timeline at the quote stage and we stick to it.
A single swing gate in Colleyville typically costs $4,800 to $8,500, a double or sliding gate runs $7,500 to $14,000, and automation adds $1,800 to $4,500. The exact number depends on gate width, steel gauge, finish, and operator brand. Call (817) 242-5426 for a free site visit and a written quote before any work begins.
Yes, we install and program Ghost Controls, DoorKing, Elite, and Mighty Mule operators regularly for Colleyville homeowners. Our technicians are factory-trained on all the major automation brands, so the correct opener is matched to the gate weight the first time. Whatever brand is on your existing gate, we can wire and configure it during your new installation.
If your gate has failed and your property is unsecured, we can often schedule Emergency Gate Installation in Colleyville, TX or a temporary repair while a replacement gate is being fabricated. A live person answers our phone 24 hours a day, 7 days a week, including holidays. Call (817) 242-5426 and we’ll tell you honestly whether same-week installation is possible for your situation.
Every gate installation from Ironworks Gate Co. is covered by our written 90-Day Done Right Promise. If anything is not right within 90 days, we come back and make it right at no charge. No paperwork, no arguing. That guarantee applies to the labor on the entire job.
Clear the driveway and the area around the gate opening so our crew has room to work, and move any vehicles that would block access. Let us know if any pets will be outside so we can coordinate around them. We’ll handle the rest: post digging, concrete, electrical, and cleanup. Most Colleyville homeowners don’t need to be home for the entire installation, but Victor Salinas will walk the finished gate with you before we leave.
Schedule Your Gate Installation Service in Colleyville Today
A new gate is a decision you’ll live with for decades. Get it done right the first time. Call Ironworks Gate Co. at (817) 242-5426 for a free, no-obligation estimate on gate installation in Colleyville. A live person answers any hour, day or night, and the price we quote is the price you pay. We’ve been doing this since 1984, and we plan to be here when your gate needs us next.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville since 1984.