Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford, TX usually means replacing or rebuilding an existing gate on a home built between the mid-1960s and early 1990s. Most jobs run $2,800 to $7,500 for a full driveway gate replacement with steel posts set in concrete, and we book Bedford work within a few days. Call (817) 242-5426 for a free measure and written quote before any work begins.
Bedford is fully built out. There is very little new construction here, which means almost every gate we install is a retrofit on a property where the original gate served 30 to 50 years. The soil beneath Bedford is expansive Fort Worth Clay, and it shifts. A gate that worked fine for two decades will start dragging on one side when the hinge posts heave out of plumb, which is why Gate Repair in Bedford is often needed before full replacement. We know this ground, and we dig footings that account for it. Our crews serve Bedford directly from the Dallas-Fort Worth metro office, and a live person answers the phone 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
Ironworks Gate Co. has been doing this work for over 42 years, founded in 1984. Bedford homeowners call us because they have already tried the cheaper fix. They have shimmed a sagging gate, replaced a latch, maybe re-hung the panel once or twice, and the problem came back. Our Gate Installation in Bedford customers tell us the same story: somebody fixed the symptom, not the footing. We reset the post, re-hang the gate, and write the 90-Day Done Right Promise on the invoice. If it is not right, we come back and make it right. No paperwork, no arguing.
Every technician who shows up at a Bedford home is background-checked and uniformed. Victor Salinas, who leads the company, runs crews on the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. That is why homeowners off Harwood Road, along Forest Ridge Drive, and in the older sections near Bedford Boys Ranch call us back when the next gate needs attention.
Our Gate Installation Services in Bedford
We handle the full scope: driveway gates, pedestrian gates, sliding gates, and swing gates. Most Bedford jobs are replacements or rebuilds of existing installations. Here is what that looks like in practice.
Driveway Gate
Driveway gate installation in Bedford typically runs $3,200 to $8,000 for a standard single or double steel gate with automated opener. The older ranch homes around the Meadow Lakes and Shady Brook areas often have long, flat driveways where a single swing gate works well. We cut out the old posts, dig new footings to the correct depth for Bedford’s clay, and set steel posts in concrete with gravel drainage at the bottom. The gate gets hung plumb, the opener gets wired, and we test the full travel before we leave.
Pedestrian Gate
A pedestrian gate beside the driveway or in a side yard fence runs $800 to $2,200 in Bedford, depending on the frame material and whether you want a keypad or intercom. Many Bedford homes built in the 1970s and 1980s still have original cedar pedestrian gates with rotted posts at the clay line. We replace them with steel posts and a square steel frame, hung on adjustable hinges so the gate can be re-trued years down the line without digging a new hole.
Sliding Gate
Sliding gate installation runs $4,500 to $9,500 in Bedford. Sliders work well on properties where the driveway slopes upward from the street, common in neighborhoods east of Central Drive. A cantilever or rolling slider does not sag with the soil the way a swing gate does, because the load rides on a track or rollers instead of hinge posts. We fit the rack to the gate, set the motor on a concrete pad, and dial in the travel limits so the gate opens and closes without slamming.
Swing Gate
Swing gate installation in Bedford runs $2,800 to $7,000 for a single, and $4,800 to $9,800 for a double. This is the gate type we rebuild most often in Bedford, because swing gates are the most vulnerable to what the clay soil does. Every spring after heavy rain, hinge posts settle. Every drought summer, the soil contracts and the posts lean. We set swing gate posts deeper than most crews, using concrete footings sized for expansive soil and a gravel base that gives water somewhere to go besides up against the steel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We are trained and equipped on nine gate automation brands. For Bedford customers, the three we see most often are Bedford Ghost Controls service, DoorKing, and Mighty Mule. Whether your existing opener is a LiftMaster that came with the house in 1998 or a newer Ghost Controls unit, our technicians can install the gate and integrate the opener correctly on the first visit. We carry common parts for these brands on our trucks, so most Bedford jobs finish in a single trip.
Common Gate Installation Problems We See in Bedford Homes
Bedford’s housing stock and soil create a specific set of problems. These are the ones we fix most often:
- Hinge posts heaving out of plumb. Expansive clay swells in spring and cracks in summer, pushing shallow-set posts out of level. The gate drags on one side and gaps on the other. The fix is a deeper footing, not another shim.
- Rotted cedar posts at the clay line. Homes built before the 1990s often have original wood gate posts set directly in soil. The post rots where it meets the clay. We replace with steel posts set in concrete below the frost line.
- Wind and hail damage to solid infill gates. Bedford sits squarely in the DFW hail belt. Spring storms bend aluminum panels and twist lighter gate arms. Solid privacy gates catch the most wind, so the frame needs to be sized accordingly.
- Stuck automatic gates after power outages. Thunderstorms knock out power, and homeowners discover their gate opener has no battery backup and they do not know the manual release. A simple release key or lever saves a lot of frustration.
Pricing for Gate Installation in Bedford, TX
You can expect to pay the following for gate installation work in Bedford. These are real ranges from jobs we have done in this city, not national averages:
- Pedestrian gate: $800 to $2,200
- Single swing driveway gate with steel posts: $2,800 to $7,000
- Double swing driveway gate with steel posts: $4,800 to $9,800
- Sliding driveway gate with opener: $4,500 to $9,500
- Full replacement of two posts and re-hang of an existing gate: $1,400 to $3,200
- Opener installation on an existing gate: $900 to $2,400
The final number depends on the gate length, frame material, opener brand, and what is wrong with the existing posts or footings. We quote the price before any work starts. It is written down, and it does not change unless you approve something different. Estimates are free. Call (817) 242-5426.
Storm and wind exposure shapes a lot of what we do in Bedford. A solid infill gate on a corner lot near Pipeline Road catches north winds differently than a gate tucked behind a fence line. We factor that in when we size the posts and choose the hinges. The goal is a gate that stays plumb through Bedford’s wet-dry cycles and does not twist in the first spring storm.
One more thing worth saying plainly. Last spring, after a heavy storm soaked the clay along Pipeline Road, our crew reset a badly sagging double swing gate on a 1980s ranch home. The original cedar hinge posts had rotted at the clay line and the gate dragged on one side, pulling the LiftMaster operator out of alignment. We dug new footings to 36 inches, set steel posts in concrete with gravel drainage, and reinstalled the swing gate with reinforced hinges and a new keypad entry. The homeowner told us three previous Gate Parts & Welding in Bedford repairs had only shimmed the panel without fixing the post footing. That is the difference between patching and installing.
We Also Serve Cities Near Bedford
Ironworks Gate Co. serves the Mid-Cities area around Bedford. If you are in Colleyville, Euless, Hurst, or North Richland Hills, the same crew and the same 90-Day Done Right Promise apply. We schedule work across the corridor weekly, so response time stays short whether the job is in Bedford or one of the neighboring cities.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
For a swing gate post in Bedford, we dig footings to 30 to 36 inches deep and use 12 to 16 inches of compacted gravel below the concrete so water drains away from the steel. The city’s Fort Worth Clay expands when wet and shrinks in drought, and a post set at the old standard of 18 to 24 inches will heave out of plumb within a few years. Deeper footings with a gravel base keep the post anchored through the full wet-dry cycle. If your gate is already sagging, call (817) 242-5426 and we will tell you if the footing is the problem.
Most Bedford gate openers have a manual release lever or key located on the operator unit or the motor housing. Pull the lever or turn the key to disengage the motor, then push the gate open by hand. Do not force the gate if the wind is loading the panel from behind. After power returns, re-engage the opener and let it run through a full open-close cycle so the limits reset. If your opener has no accessible release, or you cannot find it, call us at (817) 242-5426; we can walk you through it or come out and add a battery backup so the next storm does not strand you. We also install Bedford Gate Access Control systems with manual override features.
In most Bedford cases, yes, a single post can be replaced without replacing the whole gate, as long as the gate frame and hinges are still sound. We cut out the old post, dig a new footing to 30 to 36 inches, set a new steel post, and re-hang the existing gate. The gate often needs its hinge cups or bolts replaced at the same time, because years of sag have wallowed them out. We will tell you the honest condition of the gate before we quote. If the frame is rusted through, a partial fix is throwing money away, and we will say so.
Yes. A solid wood or steel infill gate catches wind like a sail, and Bedford’s spring storm season brings gusts strong enough to bend the frame or rip a hinge off. We reinforce solid gates with a welded steel tube frame behind the infill and use heavier hinges rated for the full gate weight. For gates wider than 8 feet, we recommend a double leaf design or a slider, because a single solid panel that wide becomes a structural problem in a thunderstorm. Call (817) 242-5426 and we will tell you what your gate needs.
Yes, in most cases a solar opener can be installed on an existing Bedford gate, provided the gate itself is plumb and moving freely. Solar openers from brands like Mighty Mule and Ghost Controls work well on single swing gates with a clear southern exposure. If your gate is already sagging or dragging, the opener will burn out quickly regardless of power source. We can assess the gate, correct the alignment, and set up a solar system with a battery small enough to be practical but large enough to hold through two or three cloudy days. Call (817) 242-5426 for an honest site evaluation.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the Mid-Cities since 1984.