Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Keller
When a driveway gate motor gives out in Keller, you don’t need a handyman taking a guess. You need a company that knows exactly what’s failing on the operators installed across Hidden Lakes, Marshall Ridge, and the other master-planned communities built between 1993 and 2012. Ironworks Gate Co. has spent 42 years working on ornamental iron gates and the automation that drives them. We know the builder-grade operators put in during Keller’s big buildout years are now hitting end-of-life at the same time, and we know the black clay soil under your posts is doing the rest. If you’re trying to open a gate by hand while the motor sits dead, call (817) 242-5426. A live person answers, day or night.
Key Takeaways
- Keller’s original builder-grade operators are 15-25 years old now and failing on a predictable timeline.
- Expansive black clay soil heaves gate posts seasonally, causing fault codes that look like motor failure but are often footing problems.
- Every job is quoted and agreed before we turn a single bolt. No surprises on the bill.
- We service nine major automation brands, including LiftMaster and Viking, the two most common in Keller driveways.
- Our 90-Day Done Right Promise is written on every job. If it’s not right, we come back and make it right.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Motor & Opener Company
Keller homeowners tend to stay put. The person on the other end of the phone has usually lived in their home for twenty years or more, and they’ve heard every empty promise from contractors who didn’t finish the job. That’s why we keep things square. The price is set before work starts. The technician arrives in uniform, background-checked, and treats your property like it belongs to his own mother. And the work is backed by a written 90-Day Done Right Promise, no paperwork, no arguing.
We’re not the cheapest bid in Keller, and we won’t pretend to be. We’re the company that fixes it correctly on the first visit, whatever brand is on the column. Our Gate Motor & Opener team is trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most jobs are completed in a single visit. Keller residents who call us get a straight answer, an honest price, and a gate that cycles like it should.
Our Gate Motor & Opener Services in Keller
Motor Repair
A dead operator in Keller is rarely as simple as a fried motor. We see the same pattern every autumn: a dry summer shrinks the clay soil, the hinge post heaves, the operator arm binds, and the control board throws a fault code. We diagnose the whole system, not just the motor. If the post needs re-plumbing, we re-set it in a deeper footing with a steel sleeve, re-align the hinges, and reset the limit switches. The fix lasts, because we address the soil movement that caused the fault in the first place.
Motor Installation
When a builder-grade operator finally dies in Keller, we replace it with a heavy-duty swing-gate or slide-gate operator sized for ornamental iron, not a lightweight unit meant for a wood picket gate. Keller’s gates are heavy. They were built as architectural statements, and they need an operator with the torque to move that weight smoothly for another twenty years. We’ll spec the right unit, install it, program the limits, and verify every safety sensor before we leave.
Linear Motor
Linear operators show up all over Keller’s deed-restricted subdivisions, often paired with slide gates at wider driveway entrances. These units fail differently than swing-gate arms. We repair and replace Linear operators regularly, including the control boards that corrode after exterior exposure. If your Linear unit grinds, stalls mid-travel, or won’t respond to the remote, we’ll get it sorted in one visit most of the time.
Slide Motor
Slide gates are heavy, and they run on a track that has to stay perfectly level. In Keller, that level gets thrown off every time the clay soil beneath the track heaves or settles. We service slide motor systems throughout 76244 and 76248, repairing drive chains, sprockets, and operators on properties with long side yards and estate-style entrances. If the track has shifted, we address it, because a slide motor pushing a binding gate burns out fast.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
The operators installed across Keller during the 1990s and 2000s came from a predictable list: LiftMaster and Viking on swing gates, DoorKing and Elite on large estate slide gates, Mighty Mule on lighter budget installs, and Ghost Controls on newer retrofits. We service all of them. Our trucks carry the common replacement parts for these brands, which means most Keller repair calls get done same-day rather than waiting for a part to ship. If your operator was installed by the builder when your house went up, chances are high we already know exactly what’s failing.
Common Gate Motor & Opener Problems We See in Keller Homes
- Builder-grade control boards failing after an ice storm. DFW gets at least one hard freeze most winters. When an operator housing cracks and lets moisture in, the control board is usually the first casualty. Keller homes built in the 1990s and 2000s are hitting this failure window right now.
- Black clay soil heaving the hinge post. Keller sits on expansive clay that swells with spring rain and shrinks in summer drought. The post shifts, the operator arm binds, and the unit throws a fault code. A new motor won’t fix it. The post has to be re-plumbed.
- Manual gates retrofitted without proper power. Many Keller homeowners bought homes with ornamental iron gates that were never automated. Retrofit projects often reveal there was no conduit or dedicated power run left in place during the original build. We run the proper electrical and install the operator so it’s protected, not surface-wired.
- Battery backup systems failing after long Texas summers. Heat kills batteries faster than anything. Keller’s sustained summer temperatures above 95 degrees shorten the life of battery-backup units, and most homeowners don’t realize the battery is dead until the power goes out and the gate won’t move.
Pricing for Gate Motor & Opener in Keller, TX
A motor repair in Keller typically runs $180 to $340, depending on what’s actually failed. Simple limit-switch resets and sensor alignments fall on the lower end. Control board replacements run $250 to $450. A full motor replacement, including the operator unit, typically lands between $750 and $1,400 for a heavy-duty swing-arm unit sized for Keller’s ornamental iron gates. Slide-gate operators run higher, usually $1,200 to $2,500 installed. Battery backup systems add $200 to $500. Every quote is written out and agreed to before we start. You’ll never get an invoice bigger than the number we gave you. Call (817) 242-5426 for a free estimate on any gate operator work in Keller.
We Also Serve Cities Near Keller
While this page focuses on Keller, our Gate Motor & Opener in Keller crews also serve North Richland Hills, Southlake, Colleyville, and Haltom City. If you’re a few minutes down the road and your gate just stopped responding, call us. We likely have a truck nearby.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Keller
Because the clay soil under your gate post is moving. Keller’s expansive black clay shrinks during the dry summer, pulling the hinge post slightly out of plumb. The operator arm then binds against the gate, and the unit throws a fault code, usually on LiftMaster or Viking operators. If someone already replaced the motor and the problem came back, the motor was never the issue. The fix is re-setting the post in a deeper footing, often with a steel sleeve, and then resetting the limit switches. That’s a recurring pattern across Keller’s 1990s-2000s subdivisions, and we see it every season. Call (817) 242-5426 and we’ll diagnose it right the first time.
Yes. This is one of the more common projects we do in Hidden Lakes and throughout Keller. The catch is that many of those gates were installed without conduit or a dedicated power run, because the builder never planned for automation. We handle the whole job: trenching the electrical run, mounting the operator, installing the safety sensors, and programming the remotes and keypad. The work gets done to code, with nothing left surface-mounted and exposed. Most retrofits are completed in a single visit once the power run is in. We’ll give you a written quote before any digging starts.
The control board is almost always the first thing to go. Ice storms crack the exterior operator housing, moisture gets in, and the board shorts out. On Keller’s older builder-grade units, this is a very common write-off. The motor itself may still be fine. We’ll test the board, check the transformer, and let you know exactly what failed before recommending a repair or replacement. If the unit is 15 to 25 years old, it’s usually time for a full replacement, because patching one failed component on an aging operator just buys you another season.
If the gate leaf is visibly sagging or dragging, the problem is almost never the motor. It’s the hinge post. The motor is working harder because the gate’s weight isn’t carried properly anymore. Fixing the post and re-plumbing the hinges usually solves it. A motor swap without fixing the alignment just means the new motor gets strained the same way, and you’ll be back here in a year. In Hidden Lakes, we recently diagnosed a LiftMaster LA400 that had been throwing error code 31 every fall for three years. The homeowner had already replaced the control board once. Our tech found the hinge post had heaved nearly an inch out of plumb after the summer drought. We re-set the post in a deeper footing with a steel sleeve, re-plumbed the hinges, and reset the limits. That gate has cycled clean through two winters since.
Yes. Automatic gate operators are regulated under UL 325 safety standards, which apply throughout Texas, including Keller. Your gate must have entrapment protection: photo-eye sensors, edge sensors, or both, depending on the gate type and installation. If your gate reverses unexpectedly or won’t close, a misaligned or failed safety sensor is a common culprit. We inspect and calibrate these on every service call. If yours was installed years ago and the sensors have never been checked, call (817) 242-5426 and we’ll make sure the system is compliant and safe.
Call Ironworks Gate Co. for Gate Motor & Opener Work in Keller
If your gate operator is making noise, throwing fault codes, or dead on the column, call (817) 242-5426. You’ll speak to a person, not a voicemail tree. We’ll schedule a time that works, show up when we say, quote the job before any work begins, and stand behind it in writing. Victor Salinas and the team at Ironworks Gate Co. have spent over four decades doing gate work the right way, and we’ll do the same for your Keller home. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding DFW metro since 1984.