Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Colleyville
Gate hinge replacements in Colleyville typically run $220-$480 per hinge set. Full post replacement with footing work starts around $390 and can reach $900 when a crew has to cut out and re-pour a heaving clay footing. If you’re on a 1980s or 1990s estate lot along Cheek-Sparger, Pool Road, or Glade Road and your gate has started binding, sagging, or dragging, the real culprit is often not the hinge itself. It’s what the hinge bolts into. We’re Ironworks Gate Co., and we’ve been fixing the parts and welds under Colleyville’s ornamented driveway gates long enough to know where the recurring problems actually live. Call us at (817) 242-5426 for a free estimate.
Our Gate Parts & Welding crew stocks common hinge, roller, and latch hardware for older estate gates and can fabricate or weld what can’t be bought anymore. Victor Salinas and our welders have a name in this part of Tarrant County for fixing the foundation problem, not just masking it.
Why Ironworks Gate Co. Is Colleyville’s Preferred Gate Parts & Welding Company
Colleyville is not Bedford. It’s not Hurst. The gates here are different: bigger, older, custom-built, and hung on driveways that were poured for 1980s and 1990s estate homes that now hold million-dollar values. We’ve worked enough of these properties to know the gate that closed fine for thirty years and now won’t is rarely just “worn out.” It’s usually the ground beneath it.
Most Colleyville customers call us because their operator is pushing a gate that the dirt has moved. The Blackland Prairie clay here expands in wet months and shrinks in drought. Post footings heave. Gate posts lean. Hinges tear or the gate binds mid-travel while a perfectly good motor burns itself out. We fix the post, the hinge, and the weld, and we do it with a written 90-Day Done Right Promise so you’re not chasing us for a redo.
Response to Colleyville is same-day for most hinge failures and welding cracks. We dispatch from our DFW scheduling office and our technicians know Colleyville’s neighborhoods without a map: Montclair, Witten’s, John Patterson’s original subdivisions, the custom estates east of 26, the gated entries near McPherson Boulevard and Pleasant Run Road. That matters when you’re calling about a gate that won’t close and you don’t want a technician burning an hour trying to find you.
We come background-checked and uniformed. We name the price before the torch lights. And when there’s a written estimate from another company, we’ll give you a free second opinion before you sign anything.
Colleyville Gates Are Aging All at Once
Here’s something a parts catalog won’t tell you. Colleyville is one of the wealthiest cities in Texas, with a remarkably high density of custom single-family estates built in the 1980s and 1990s. Those homes were fitted with automatic ornamental iron driveway gates as original features. The operators are now 25 to 40 years old and reaching end-of-life simultaneously. That creates a concentrated wave of gate repair and replacement demand here that you simply don’t see at the same scale in neighboring working- and middle-class cities like Bedford or Hurst. We stock hardware and replacement boards specifically because Colleyville’s gates hit this wall together.
Our Gate Parts & Welding Services in Colleyville
Four services cover most of what breaks on a Colleyville estate gate. Here’s how we handle each.
Hinge Replacement
Wrought-iron and steel swing gates on Colleyville’s big lots hang on barrel hinges, strap hinges, or weld-on adjustable hinges. When a hinge wears, the gate sags at the latch stile. You’ll see a gap at the top latch or hear the gate scrape the driveway. Hinge replacement in Colleyville runs $220-$480 per set depending on gate weight and whether the hinge was welded to the post or bolted through. We replace pins, bushings, and the full leaf when the metal has wallowed out, and we shim or re-weld the post mount so the new hinge isn’t fighting a lean the clay put in the post.
Post Replacement
This is where most Colleyville gate problems actually begin. Post footings set in expansive clay don’t stay put. A post can lean 2 to 3 degrees in a single wet season. The gate binds, the operator fights it, the control board overheats, and you’re paying for symptoms. Full post replacement, including cutting out the old footing, boring or pouring a deeper concrete pier with rebar, and re-hanging the gate, runs $390-$900 in Colleyville depending on gate size and whether the post is square tube, round, or decorative brick-columned steel.
Rail Repair
Slide gates on Colleyville estate driveways take rack and pinion track systems. After a wet spring, the rack gets pulled out of alignment by heaving post footings and the gate jumps or binds on the rail. We straighten or replace bent rail sections, re-weld rack segments, and shim the track so the pinion rides square. Rail repair runs $180-$520 mostly depending on how many linear feet of track has moved and whether the original rail is salvageable or needs new stock welded in.
Custom Welding
When a decorative picket snaps, a latch stile cracks, or a hinge mount tears off the post, you can’t order that part from a catalog. Most of Colleyville’s ornamental ironwork was made by shops that are long gone. Our welders cut out the failed section, fabricate a matching replacement from steel stock, and weld it in clean. Small weld repairs start around $150. Full stile or lower-rail rebuilds on a large estate gate run $350-$700. We match profile and finish, then prime and paint so the repair doesn’t advertise itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
We service, repair, and retrofit gate operators and parts from DoorKing, Elite, Viking, Ghost Controls, and more. What that means for a Colleyville homeowner is simple: the technician who shows up already knows the board, the limit switch layout, and the failure points on your specific opener. If you have an early LiftMaster or Linear unit from the home’s original build, we can usually retrofit a modern operator or add UL 325 safety photocells to the existing gate rather than forcing a full replacement.
We stock common hardware locally: hinge sets, rollers, latch pins, keypads, and photocells. When you call Monday with a broken hinge, you’re not waiting a week for a part to ship from a warehouse in another state. The part is in our truck or at our DFW parts bench.
Common Gate Parts & Welding Problems We See in Colleyville Homes
- Operator burns out while the gate binds. Original early LiftMaster and Linear operators from the 1980s and 90s burn out control boards trying to move a gate whose hinge post has shifted out of plumb in the clay. The motor runs, gets hot, trips, and eventually fails. We replace the board if the motor’s sound, but we also fix the post lean so the new board isn’t dead in two years.
- Slide gate jumps the rack after rain. Wrought-iron slide gates on estate driveways seize on their track after a wet spring because the rack and pinion have been pulled out of alignment by heaving post footings. The result is a gate that jerks, stalls, or throws itself off the rail entirely.
- Decorative welds crack in DFW ice storms. Ice loads and freeze-thaw cycles open up old weld points on exposed decorative ironwork. You’ll see cracks at scroll joints, picket bases, and the latch stile, which causes sag that a hinge swap alone won’t correct. The cracked weld has to be ground out and re-welded first.
- Gate realigned every season but still drifts. The post footings are moving with the Blackland Prairie clay. A gate realigned without releveling the post foundation will be back out of adjustment within one seasonal cycle. This is the most common repeat call in Colleyville, and it’s the one a generic parts page never mentions.
Pricing for Gate Parts & Welding in Colleyville, TX
Honest numbers, Colleyville market:
- Hinge replacement: $220-$480 per hinge set
- Post replacement with footing work: $390-$900
- Custom welding repair: $150-$700 depending on scale
- Rail repair or track realignment: $180-$520
- Latch, lock, or roller replacement: $85-$265
What moves the price: gate size and weight, whether the post is square steel or brick-columned, how much weld metal needs cutting out, and whether the footing itself has to be re-poured. You get the full price in writing before we put a wrench on anything. Estimates are free. Call (817) 242-5426 and we’ll walk the job with you.
On a 1980s estate off Cheek-Sparger Road, we found a Linear swing gate operator cycling but the gate binding mid-travel. The hinge post had leaned 3 degrees from clay heave, tearing the hinge bolts and stressing the operator arm. Our crew cut and sistered the post footing, rebuilt the hinge post plumb, replaced the worn hinge and latch, and then rewired the operator with a UL 325 safety photocell. The gate has stayed true through two seasonal cycles. Not because we tightened bolts. Because we fixed what moved the bolts.
Victor Salinas won’t let a crew leave a post leaning and call it done. The gate has to close true and the operator has to run without strain on day 400, not just day 4.
We Also Serve Cities Near Colleyville
Our crews work Colleyville daily, and we serve the surrounding Tarrant County communities too: Colleyville, Bedford, Southlake, Euless, and Hurst. If you’re on the edge of Colleyville near the Southlake line off Cheek-Sparger or along 121, you’re in our service area. Same crews, same written promise.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Colleyville
If the motor runs and the gate moves partway before stalling, it’s usually the hinge post leaning out of plumb and binding the gate leaf. The operator is working against resistance the clay has created. We check post level with a digital angle gauge before condemning a board. If the post is moved, fixing the operator alone won’t last. Call (817) 242-5426 and we’ll diagnose it on site.
Sometimes. If the post is plumb and solid, and the sag is from a cracked weld at the latch stile or a worn hinge, welding corrects it. If the post has moved, welding the gate back square without fixing the post just moves the stress to a new weld. We tell you which case you have before cutting anything.
Yes. We add UL 325 compliant photocells and edge sensors to older Linear, Elite, and early LiftMaster operators regularly. If your operator predates the current safety standards and can’t accept a modern photocell input cleanly, we’ll wire a standalone receiver so the gate meets today’s reversal requirements. You don’t have to abandon a solid old operator just because the safety code changed.
Usually it’s the rack and pinion pulled out of alignment by heaving post footings, not the track itself. After a wet spring, Colleyville’s clay expands and shifts the posts. The track may still be level while the rack has moved relative to the pinion. We check both, re-weld or shim the rack, and re-pour the footing if it’s the source. Call us for a straight answer at (817) 242-5426.
Yes. Ice storm damage is usually cracked weld joints at scrolls, pickets, or the latch stile, and it’s repairable by cutting out the failed weld and running fresh metal. We prime and paint the repaired section to match. If the gate frame itself is bent from ice load, we’ll tell you honestly whether straightening it is worth it or replacement is the cheaper answer. Estimates in Colleyville are free.
Call Ironworks Gate Co. for Gate Parts & Welding in Colleyville
If your gate is sagging, binding, jumping the rail, or the operator is grinding itself to death, call us. We’ll give you an honest diagnosis, a written price, and a repair that holds. Same-day response to Colleyville for hinges, welds, and emergencies. Call (817) 242-5426 for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville and surrounding Tarrant County communities.