Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
Gate parts and welding in North Richland Hills usually means one of two situations: a hinge post has moved out of plumb from the clay soil, or a weld has finally let go after thirty years of sun and use. Most repairs run $180 to $650 depending on whether we’re resetting a post or fabricating a new bracket. We serve the whole city, from the older neighborhoods around Smithfield Road to the HOA communities off Mid-Cities Boulevard. Call (817) 242-5426 and a live person answers, day or night.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Parts & Welding Company
We’ve been doing Gate Parts & Welding work long enough to know that North Richland Hills has a specific problem other Tarrant County suburbs don’t share to the same degree. The Blackland Prairie clay under your driveway expands when it rains and contracts when it dries. That movement works on gate posts year after year until the post leans, the frame racks, and welds crack. Homeowners here don’t need a generic hardware swap. They need someone who understands why the post moved in the first place.
Our crews arrive in marked trucks, in uniform, and we quote the job in writing before any work starts. Victor Salinas leads a team that has specialized in gate work exclusively, not as a side trade between fence jobs. That focus matters when you’re welding a latch plate back into alignment on a pool enclosure gate that a home inspector just flagged. We stand behind every repair with the 90-Day Done Right Promise in writing.
Our Gate Parts & Welding Services in North Richland Hills
Hinge Replacement
Hinges on North Richland Hills gates take a beating from two directions: the weight of the gate and the constant push-pull of clay soil shifting the post they’re bolted to. When a hinge bearing wears egg-shaped or a weld cracks at the barrel, the gate drops on the latch side and drags. We replace hinges with heavier-gauge steel than what most tract-home builders installed in the 1980s, and we weld the new hinge plates to the post rather than relying on lag bolts that pull loose in cracked clay.
Post Replacement
This is the repair we do most often in North Richland Hills. A 1980s swing gate’s post footing can shift more than an inch between a wet spring and an August drought. The post leans, the gate binds, and no amount of latch adjustment fixes it because the problem is underground. We excavate the old footing, often finding it was poured shallow and narrow forty years ago, and we set a new post in a deeper, wider concrete base. Galvanized post, properly crowned concrete, and the gate hangs square again.
Rail Repair
Top and bottom rails on ornamental iron gates corrode from the inside out, especially where sprinkler spray hits the bottom rail every morning. In North Richland Hills the added stress of post movement means rail sections crack at the welded joints. We cut out the compromised section and weld in new steel matched to the existing profile, then dress the seam so the repair disappears under paint. Decorative scrollwork isn’t a problem either. Our welders can replicate the original bends and twists without replacing the whole gate.
Custom Welding
When a gate was custom-built for a specific driveway opening thirty years ago, off-the-shelf parts don’t exist. That’s where our welding shop earns its keep. We fabricate replacement pickets, rebuild sagging frame corners, weld mounting tabs for new operator arms, and extend gates that no longer reach a new post location. If HOA architectural guidelines require a specific finish height or style, we can weld to match what’s already approved rather than asking the board to review an entirely new gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
When a welded repair touches an automated gate, we work on the operator too. Our techs are trained and equipped on Viking, Ghost Controls, and DoorKing systems, which show up on a lot of North Richland Hills driveways from the 1990s and 2000s build-out. We keep common weld-on brackets, hinge barrels, and replacement latch plates stocked locally so a single visit covers most repairs. No ordering parts and coming back next week.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Heaved hinge posts: Wet winters swell the clay and push posts up and out of plumb. The gate still swings, but the latch no longer lines up with its strike plate. Homeowners often call us thinking the latch is broken when the post is the real issue.
- Drought-dropped posts: By late summer the same clay that heaved in spring dries out, cracks, and drops the post unevenly. Slide gates bind on their rollers and rack-and-pinion operators start faulting mid-travel because the track is no longer straight.
- Heat-bound frames on 100°F days: North Richland Hills regularly hits triple digits in July and August. An ornamental iron gate expands enough that the frame pushes against the operator arm, tripping the safety photocell or jamming the motor. A slight rehang or a welded adjustment at the operator bracket fixes what looks like an electrical problem.
- Failed pool enclosure gate welds: A high share of NRH homes from the 1980s and 1990s have in-ground pools. Pool inspectors during home sales flag self-closing hinges and self-latching hardware that no longer work. Often the post shifted enough in the clay that the latch misses the strike entirely, and the fix is a post reset plus a welded latch plate.
Pricing for Gate Parts & Welding in North Richland Hills, TX
Here’s what we see on typical North Richland Hills jobs. Hinge replacement on a standard 6-foot ornamental gate runs $180 to $320. Post replacement with excavation and a new concrete footing runs $350 to $650 per post depending on depth and whether we’re matching an existing ornamental post or setting a new galvanized one. Rail repair and section welding runs $150 to $400 depending on how much steel we’re cutting out and replacing. Custom welding for brackets, latch plates, and operator mounts runs $120 to $350. Every job gets a written price agreed before any work begins. We don’t surprise anyone on the bill. Current offers: $50 off any repair over $250, plus a standing 5% senior and veteran discount. Call (817) 242-5426 for an exact quote, free estimates every time.
We Also Serve Cities Near North Richland Hills
Ironworks Gate Co. provides Gate Parts & Welding in North Richland Hills and the surrounding communities including Hurst, Haltom City, Bedford, and Colleyville. If you’re just over the city line off Precinct Line Road or Highway 26, we’re already nearby.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
For a shared or common-area entry gate, yes, almost always. Most North Richland Hills HOAs require architectural review before structural changes, including post replacement or visible welding, because the gate is a common element the association maintains. For a private driveway gate on your own lot, standard repair that matches the existing style and finish typically doesn’t need approval, but check your covenants. We’ve worked with management companies across North Richland Hills and can give you a written scope of work the board can review. Call (817) 242-5426 and we’ll help you sort out what the HOA needs to see.
On 100°F days the galvanized or painted steel frame of your gate expands enough that the running surface, the rollers, and the guide track all tighten against each other. The operator senses the added resistance, thinks something is blocking the gate, and reverses. The fix is usually mechanical, not electrical: rehanging the gate with more side clearance or welding a shim at an operator bracket so the arm alignment corrects for the expansion. We test on the hot days, not just in the shop, because that’s when your gate actually fails.
Yes, and we see this constantly in North Richland Hills pool homes from the 1980s and 1990s. The clay soil moves the post out of plumb and the self-closing spring can’t pull the gate far enough for the latch to catch. We reset the post in a deeper footing, rehang the gate with new hinges, and weld a fresh latch plate in the correct position so the gate self-closes and self-latches square. Pool inspectors check this specifically during home sales, so getting it right matters. Call (817) 242-5426 for a free estimate before your closing inspection date.
The sag is almost always the hinge side, not the latch side. When the post has moved out of plumb in the clay, the hinge barrels wear faster and the gate drops. We assess the post first. If it’s solid and still plumb, we replace or rebuild the hinges and rehang the gate. If the post has moved, we reset it before any hinge work, otherwise you’ll be redoing the repair in eighteen months. On the latch side, we weld a new strike plate aligned to the corrected gate position so the latch throws clean every time.
Not usually. When we excavate and reset a post, the gate itself comes off the hinges and gets set aside intact. The scrollwork, pickets, and top rail stay as they are. What does need welding is often the latch plate or the hinge plates, because the gate now sits at a slightly different angle relative to the post. We touch up any finish work to match. Our welders work as cleanly as the gate originally did in the 1980s, and the 90-Day Done Right Promise covers the whole job in writing.
Call Ironworks Gate Co. for Gate Parts & Welding in North Richland Hills
If your gate is sagging, your post is leaning, or a weld has finally cracked open, call us at (817) 242-5426. We’ll schedule a time that works, show up in a marked truck, give you a written price before any work starts, and stand behind the repair. That’s how we’ve done it for over 42 years, and that’s how we do it for every North Richland Hills customer, including the HOA communities along Davis Boulevard and the pool homes throughout the Smithfield corridor.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills and the greater Dallas-Fort Worth area since 1984.