Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Colleyville: What to Know First
Ghost Controls gate repair in Colleyville typically runs $180 to $470 for most motor, arm, and control board fixes, and we complete the majority of those jobs in one visit. We’re an independent Ghost Controls service provider, not a factory shop, so we answer the phone directly and tell you the price before a single bolt is turned.
If you own a Ghost Controls opener and the gate has stopped mid-swing, won’t respond to the remote, or is beeping at you from the control box, this page tells you what’s likely wrong, what it costs to fix in Colleyville, and how we work. You can reach us at (817) 242-5426, 24 hours a day. Victor Salinas and our technicians have been working on these openers since they first started showing up in Colleyville driveways.
Quick takeaways:
- Ghost Controls uses a 12V DC system, which behaves differently than the older AC openers many local gates still run on
- Most Ghost Controls repairs we see in Colleyville come down to four recurring issues: battery failure, arm slippage, control board faults, and limit switch drift
- A live person answers our phone, any hour, and the price you’re quoted is the price on the invoice
- Every Ghost Controls repair we complete is covered by our written 90-Day Done Right Promise
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds a solid residential opener, but every brand has its patterns. Here’s what we see most often in Colleyville, usually on the R Series and TSS1 swing-arm lines after three to seven years of Texas weather.
- Dead or weak 12V battery in R Series openers. The R Series relies on a sealed lead-acid battery, and Colleyville summers cook those batteries faster than the manufacturer’s lifespan estimate suggests. We see plenty of openers that work fine on a cool morning and fail by 3 p.m. when the heat peaks. The fix is a fresh battery matched to the board’s charging profile, and we check the charging circuit at the same time so the new battery doesn’t die young.
- Slipping arm assembly on single-swing openers. The arm that connects the motor to the gate leaf can work loose at the clamping bolts, especially on heavier Colleyville iron gates. Homeowners often call thinking the motor is burned out when the arm is simply slipping on its spindle. We correct the alignment, torque the hardware, and if the arm has wallowed out, we replace it rather than band-aiding it.
- Control board fault codes after a power surge. North Texas storms are hard on gate electronics. A nearby lightning strike or a voltage spike from the utility can scramble a Ghost Controls control board even when nothing visual looks wrong. Before we condemn any board, we check the transformer output and the wiring from the house to the gate. Sometimes the problem is in the power feed, not the opener, and fixing that costs a lot less than replacing a board.
- Ghost Controls wireless keypad drift and range loss. The keypad and remote system performs well, but over years of exposure the antenna positioning and internal keypad contacts can degrade. We see Colleyville homeowners standing at the keypad punching codes repeatedly while the gate ignores them. After ruling out battery issues, we test signal strength and ground the system properly, which often restores range and response without replacing hardware.
- Limit switch drift on older single and dual gate packages. When a Ghost Controls opener starts stopping just short of full open or reverse directions at odd points, the limit setting has drifted. This is usually mechanical wear or minor arm flex, not a board problem. We re-set the limits, verify the force settings, and test the full travel multiple times before we call it done. If the gate has sagged at the hinges, that also throws off the limits, and we’ll tell you honestly if hinge work is the real fix.
Our Ghost Controls Gate Repair Process
Every Ghost Controls job we run in Colleyville follows the same steps. It keeps the work predictable and keeps you informed from first call to final test.
- 1
You call (817) 242-5426. A live person answers. We ask what the gate is doing or not doing, and we set a service window that works for you.
- 2
We arrive and diagnose. Our technician checks the opener, the arm mechanics, the gate’s hinges and weight distribution, and the power supply. We explain what’s wrong in plain English.
- 3
We quote the repair before we touch a tool. You approve the number and the scope, and we order or pull parts on the spot. On Ghost Controls jobs we use genuine OEM parts when the repair touches electronics, and we’ll tell you when a quality aftermarket mechanical part is a smarter spend.
- 4
We fix the gate. Mechanical or electrical, usually in the same visit. Most Ghost Controls repairs fall inside one service call.
- 5
We test and re-test. Full travel cycles, obstruction detection, remote range, keypad entry, and the auto-close feature if your system uses it.
- 6
We leave the job clean and you get it in writing. Your 90-Day Done Right Promise is handed to you before we leave. If anything isn’t right within 90 days, we come back and make it right. No paperwork, no arguing.
What Ghost Controls Gate Repair Costs in Colleyville
Here are honest, straight-shooting ranges for the Ghost Controls work we do most often in Colleyville. Every price below is confirmed with you before we begin. No surprises.
- 12V battery replacement: $140-$220 including the battery and installation
- Arm assembly re-torque or replacement: $180-$380 depending on arm condition and gate weight
- Control board diagnosis and repair: $190-$470 for board replacement when required
- Limit switch re-set and tuning: $120-$190
- Keypad or remote signal troubleshooting and repair: $110-$240
Those are upfront ranges, not vague promises. What moves the price on any Ghost Controls repair in Colleyville is the age of the opener, the weight and condition of the gate itself, and whether a mechanical part like the arm or a hinge has worn beyond simple adjustment. Call (817) 242-5426 for a free estimate on the exact problem you’re seeing. We’ll ask good questions, give you an honest opinion, and never push a job you don’t need.
Why Colleyville Homeowners Call Ironworks Gate Co. for Ghost Controls Work
We’ve been serving Colleyville and the surrounding communities for over 42 years, since 1984, and we plan to be here another forty. The gates we repair today belong to the same families we fixed gates for ten and twenty years ago. That’s the kind of company we run.
Our technicians are trained and equipped on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Ghost Controls opener is on a gate that also has a DoorKing keypad or a Mighty Mule actuator on the other leaf, we aren’t baffled. We see that mix all the time on Colleyville estate gates, and we fix it correctly on the first visit.
Every job is backed by the 90-Day Done Right Promise in writing, and a live person answers our phone 24 hours a day, 7 days a week. Victor Salinas grew up in Colleyville and trained in welding and electrical systems at Tarrant County College’s northeast campus. He has been the person local homeowners call when a swing gate won’t close for more than twenty years, and he’ll be the one who makes sure your gate works right before we leave.
A gate that works right doesn’t announce itself. That’s the whole idea.
Frequently Asked Questions
No. As an independent Ghost Controls service provider, we perform repairs that are fully warranty-safe, meaning any remaining factory warranty on major components is not voided by our work. We use OEM parts on electronic repairs as standard practice, and we keep our service records clean so you have documentation if a warranty claim ever comes up.
Yes. We keep common Ghost Controls replacement parts on hand, including batteries, remotes, and arm hardware, and we can source electronic components fast through our regular suppliers. Most repairs on Ghost Controls openers are completed the same day we arrive because we carry the parts that fail most often.
If the opener is under eight years old and the gate itself is in sound condition, repair almost always makes sense. The cost of a new Ghost Controls opener installed runs $950 to $1,600, while most repairs fall between $180 and $470. We give you a straight answer on which path costs less over the long run, and we’ll never upsell you a replacement when a repair will do.
A live person answers our phone 24 hours a day, 7 days a week, and we schedule Ghost Controls repairs in Colleyville as quickly as the same day depending on call volume and your schedule. A gate stuck open is a safety and security issue, and we treat it that way. Call (817) 242-5426 and we’ll get you on the schedule.
Yes. We’re certified to work on nine automation brands including LiftMaster, Mighty Mule, and DoorKing. If your property has one brand on the swing leaf and another on the slide gate, or you’re not sure what’s even installed, we’ve seen it before and we’ll sort it out.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Colleyville and nearby areas.