Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElite Gate Parts & Welding in Colleyville: What to Know First
Elite gate parts and welding repair in Colleyville typically runs $180 to $650 depending on whether we’re replacing a hinge, rebuilding a post base, or welding a cracked rail. Most Elite jobs are completed in one visit, and we quote the full price before any work begins. If your Elite gate is sagging, grinding, or won’t latch, we can usually get a technician to your Colleyville driveway the same day you call.
This page is for homeowners with an Elite gate opener or Elite-branded gate hardware who need honest answers about parts, welding, and what it costs. We’re Ironworks Gate Co., and we’ve been repairing gates in Colleyville for over 42 years. Call (817) 242-5426 and you’ll get Victor Salinas or a live technician, not a voicemail tree.
How Elite Products Fail - and How We Fix Them
Elite makes dependable openers, but the metal around them takes a beating in North Texas. Here’s what we see most often on Elite gates in Colleyville, and how we address it:
- Hinge failure on Elite SL-3000 swing gates. The SL-3000 series uses a heavy-duty arm, but Colleyville’s clay soil shifts through wet and dry cycles, gradually pulling the gate out of square. The hinge pins take the weight and wear into an oval shape. We replace the hinge with a heavier barrel hinge, re-align the gate, and weld the post bracket in place so it won’t shift again.
- Post rot at the base on older Elite installations. Gates hung twenty years ago in Colleyville often have posts set in concrete that has cracked from soil movement. Water pools at the base, the post rusts through, and the gate leans. We cut the post above the rot, sleeve a new steel section over it, and weld it solid. No digging up the yard, no new concrete pour unless it’s absolutely necessary.
- Cracked welds on Elite SL-1000 slide gate frames. Slide gates carry all their weight on rollers, and over time the welds at the frame corners develop fatigue cracks from constant vibration. You’ll hear a rattle or see a wobble when the gate moves. We grind out the old weld, re-weld with proper penetration, and add a gusset plate where the frame takes the most stress.
- Roller wear on Elite slide gate tracks. The nylon rollers on Elite slide gates wear flat after years of Colleyville dust and grit. A flat roller makes the gate jerk and groan, and eventually it can bind the chain. We replace rollers with sealed-bearing steel units and check the track for wear before reinstalling.
- Latch and lock misalignment on Elite swing gates. When a swing gate sags even a quarter inch, the latch no longer lines up with the strike plate. The opener pushes against the lock instead of through it, and the motor strains. We correct the sag at the hinge, then adjust or replace the latch so the gate closes cleanly every time.
Our Elite Gate Parts & Welding Process
Every Elite job follows the same careful sequence, whether it’s a hinge replacement in Colleyville or a full weld repair on an estate gate:
- 1
Listen and look. We ask what you’ve noticed – when the noise started, whether the gate sags, if the opener struggles. Then we inspect the gate with you, pointing out what we see.
- 2
Diagnose the root cause. A sagging gate isn’t just a hinge problem; it’s a hinge problem plus a post problem plus maybe a frame problem. We find the actual source, not the symptom.
- 3
Present the fix and the price. We show you the parts – OEM Elite where it matters, quality aftermarket where it saves you money without cutting corners – and quote the full number before any work starts.
- 4
Do the work. Welding, grinding, fitting, aligning. We work clean and precise, the same way we’d work on our own gate.
- 5
Test it under real conditions. We cycle the gate through full open and close at least ten times, checking alignment, roller contact, and latch engagement every time.
- 6
Stand behind it. Every completed job carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
What Elite Gate Parts & Welding Costs in Colleyville
Here’s what Colleyville homeowners can expect for common Elite gate repairs:
- Hinge replacement (single hinge): $180 to $320, including parts and labor.
- Post repair with welding: $250 to $500, depending on steel thickness and whether the post needs full replacement.
- Rail or frame crack repair: $200 to $450, including grinding, welding, and reinforcement.
- Roller replacement on an Elite slide gate: $150 to $300 per gate, including track inspection.
- Latch and lock alignment: $120 to $250, including adjustment and any small parts.
What moves the price is steel thickness, how much welding is required, and whether the gate has to be removed or can be worked on in place. We quote the full price before we start, and that’s the number on the bill. Estimates are free. Call (817) 242-5426 for an exact quote on your Elite gate.
Why Colleyville Homeowners Call Ironworks Gate Co. for Elite Work
We’ve been welding and repairing gates in Colleyville for over 42 years, and we’ve seen every way an Elite gate can fail. Victor Salinas grew up near Bransford Road and trained in welding and electrical systems at Tarrant County College’s northeast campus before spending two decades learning the rest on real jobs for real neighbors. When we show up, we know the product and we know the soil, the climate, and the way gates age in this part of Texas.
Every job carries our written 90-Day Done Right Promise – no fine print, no phone calls, just a guarantee we honor. Our technicians are trained on nine gate-automation brands, so if your Elite opener also interacts with a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing component, we can diagnose the whole system, not just one part. A live person answers every call, 24 hours a day, seven days a week. And we offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
A gate that works right doesn’t announce itself. That’s the whole idea. When yours is making noise or leaning or refusing to latch, call us and we’ll make it quiet again.
Frequently Asked Questions About Elite Gate Parts & Welding
We are an independent Elite service provider, not an authorized warranty station, but we can often identify a warranty-eligible failure and guide you through the claim process. For the welding and structural work, most manufacturer warranties don’t cover hinges, posts, or frame repairs anyway – that’s wear and tear on the gate itself, and it’s exactly what we do. Call us for an honest assessment, and we’ll tell you if the issue belongs with the manufacturer or with the metal.
For opener components, we use OEM Elite parts where they affect performance or warranty. For structural pieces – hinges, brackets, plates, and steel sections – we often fabricate a stronger replacement in-house rather than buying a stamped part that will fail the same way. We’ll show you the difference and explain our choice before you spend a dollar. Call (817) 242-5426 and we’ll walk you through it.
In most cases, yes. We can cut the post above the base, sleeve a new steel section over the remaining stub, and weld it solid – no concrete removal, no driveway damage. The repair is stronger than the original post because the sleeved section adds wall thickness. If the post is too far gone, we’ll tell you before we dig, and the price is agreed before any work starts.
For a sagging gate, failed hinge, or latch that won’t hold, we can usually be there the same day you call. Colleyville is our home territory, and a live person answers (817) 242-5426 at any hour. We’ll give you a straight answer about when we’ll arrive and what the repair will cost before we touch the gate.
If the opener is still functioning and the frame is sound, welding and parts replacement is almost always the better financial move. A full replacement makes sense when the frame is rusted through in multiple places or the gate has been hit and bent beyond straightening. We’ll give you our honest recommendation with the price for each option, and you decide. That’s the square deal we’ve operated on for 42 years.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Colleyville and nearby areas.