Gate Repair in Colleyville, TX

Trusted Gate Repair for Colleyville Homeowners

Colleyville Gate Repair typically costs between $180 and $850 depending on what’s failing, and most jobs can be completed in a single visit. We’re Ironworks Gate Co., and we’ve been repairing driveway and estate gates across Colleyville and the surrounding communities since 1984. If your gate is sagging, grinding, or refusing to open, call (817) 242-5426 and a live person will answer, day or night. We show up when we say we will, quote the price before we turn a single bolt, and back every completed job with our written 90-Day Done Right Promise.

Call (817) 242-5426

A gate that won’t close isn’t something to put off. In Colleyville, where the clay soil shifts with every wet and dry season, gate posts move, hinges strain, and motors work harder than they should. Victor Salinas and our team of background-checked, uniformed technicians have seen it all across this area, from sagging wrought iron in the older neighborhoods near Colleyville Boulevard to newer automation systems that were never wired correctly from the start. We fix it right the first time, and we stand behind it in writing.

What Our Gate Repair Service Includes

Every gate repair starts with understanding what’s actually wrong, not just treating the symptom. Our technicians diagnose the full system: the metal, the hinges, the motor, the sensors, and the wiring. Here’s what we handle under the umbrella of gate repair in Colleyville.

Electric Gate Repair

Electric gate repair covers any failure in the powered side of your gate system: the motor, control board, wiring, or power supply. In Colleyville, we regularly see control boards damaged by the lightning storms that roll through North Texas in spring, and corroded wire connections from years of heat and humidity. We diagnose the electrical fault, explain it in plain English, and fix it with OEM parts wherever possible. A live person answers our phone around the clock because an electric gate failure is often a security problem, not just a convenience issue.

Automatic Gate Repair

Automatic gate repair focuses on the automation: how your gate opens, closes, and communicates with remotes, keypads, and vehicle sensors. Common failures include a gate that reverses mid-cycle, a remote that stopped working with no warning, or an opener that hums but won’t move the gate. We carry the diagnostic tools and replacement parts to fix most openers on the first visit. If your gate opens halfway and quits, that’s a job for a trained technician, not a weekend project. The tension stored in a gate system can be dangerous, and a gate that isn’t balanced properly will destroy a new motor in months.

Hinge & Post Repair

Hinge and post repair addresses the physical support structure of your gate. Colleyville’s expansive clay soil shifts dramatically between wet springs and dry summers, which slowly pulls gate posts out of alignment and puts uneven load on hinges. We repair or replace worn hinge bearings, rebuild sagging gate leaves, and reset posts that have drifted. Left alone, a sagging gate grinds the opener’s gears, cracks welds, and eventually drops the gate onto the driveway. Fixing the hinge or post early is far cheaper than replacing a burned-out motor later.

Gate Realignment

Gate realignment returns a gate to its correct position and travel path when it no longer closes flush or the latch won’t line up. You may notice the gate scraping the driveway, a widening gap at the latch side, or the opener straining to move the leaf. We measure the gate’s geometry, adjust or replace hinges as needed, and restore proper clearance and alignment. In Colleyville’s older custom gates, many of which were hand-built decades ago, realignment is often the difference between a gate that works like new and a gate that fights itself every cycle. A properly aligned gate also protects your automation investment from premature wear.

Lock Repair

Lock repair covers mechanical and electronic locks, latches, and magnetic locks (maglocks) on your gate. We see everything from deadbolt strikes that no longer line up to maglock systems that release when they shouldn’t. Our technicians repair or replace lock hardware, re-time electronic locks to your opener, and ensure the gate actually secures when it closes. For homeowners in Colleyville who count on their gate as a real perimeter security barrier, a working lock is non-negotiable. We test it thoroughly before we leave.

Weld & Rust Repair

Weld and rust repair restores the structural integrity and appearance of steel and wrought iron gates. North Texas heat and humidity take a toll on unprotected metal, and Colleyville gates from the 1980s and 1990s often have rust blisters at the bottom rail or cracked welds at high-stress joints. We grind out damaged metal, weld repair cracks with proper penetration, and treat the repaired area with rust-inhibiting primer and paint matched to your gate. Done right, a weld repair extends the life of the gate for another decade or more. A cracked weld is a structural failure, and in a moving gate, it will fail completely given enough cycles.

Brands We Service for Gate Repair

We’re factory-trained and fully equipped to repair gate openers and automation from nine major brands. We keep a running inventory of OEM parts for Ghost Controls, DoorKing, Elite, and Mighty Mule, along with the diagnostic software for each system. When your Elite opener throws a fault code, our technician reads it on the first visit, not the third.

DoorKing and Ghost Controls systems are common throughout Colleyville’s larger gated properties and estates, as well as our Gate Repair in Bedford. We’ve rebuilt DoorKing swing arm mechanisms, replaced Ghost Controls control boards, and reprogrammed Mighty Mule remotes in hundreds of local driveways. Whatever opener sits at the end of your driveway, we can service it. And if your gate is an older custom build with no brand name left on the motor, we can identify it, source the part, and get it running again.

Signs You Need Gate Repair Right Now

• The gate sags or scrapes the driveway. This means your hinges, post, or gate frame are failing. In Colleyville’s shifting clay soil, this is the most common early warning sign we see. A sagging gate destroys opener gears and can eventually pull the post out of the ground entirely.
• The opener hums but the gate doesn’t move. That humming is the motor trying to work against a mechanical bind or a failed capacitor. If you keep trying to open it, you risk burning out the motor. Call before the hum becomes a repair bill you didn’t need.
• The gate stops halfway and reverses. This often points to a sensor obstruction, a failing safety edge, or a limit switch that’s lost its setting. When safety sensors misfire, it’s also a liability risk, because the gate may not stop when it should.
• The remote works intermittently or stopped entirely. It could be a battery, but it’s more likely a receiver board, antenna, or programming fault. If your gate worked Thursday and doesn’t work Friday, that’s not a coincidence. Intermittent behavior is often an early sign of control board failure.
• You see rust blisters, cracked welds, or a wobbling post. These are structural problems, not cosmetic ones. A cracked weld under load will fail suddenly, and a wobbling post will only get worse. Early weld and rust repair costs a few hundred dollars. A fallen gate can cost several thousand.

If you notice any of these, call (817) 242-5426. We’ll diagnose the real problem, quote the repair before any work begins, and if the repair is over $250, you’ll automatically get $50 off.

Our Gate Repair Process - Step by Step

1. 1
   You call, a person answers. No phone trees, no answering service, no “we’ll call you back on Monday.” You tell us what’s happening, and we listen. We’ll ask a few questions about the gate type, opener brand if you know it, and what the gate is doing wrong. We’ll schedule a visit at a time that works for you, and we’ll be there when we say we will.
2. 2
   The technician arrives, uniformed and ready. Our technicians are background-checked and work in your home the way they would work in their own mother’s. We inspect the full gate system: posts, hinges, welds, motor, control board, wiring, safety sensors, and locks. We don’t guess, and we don’t start replacing parts until we know the root cause.
3. 3
   We quote the repair before we touch a bolt. You get an upfront price for the specific repair, not a range and not a surprise. If the repair is over $250, the $50 discount is applied on the spot. You approve the number before any work begins. No exceptions.
4. 4
   We complete the repair, usually in one visit. Our vans carry the parts, diagnostic equipment, and welding gear for most Colleyville gate repairs. We test the full cycle multiple times, check the safety edges and sensor alignment, and make sure the gate closes square and locks correctly. You get a walkthrough of what we did and why.
5. 5
   We stand behind it with the 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no fine print. The Keystone Standard applies to every job, from a hinge replacement to a full automation rebuild. That’s how we’ve done it since 1984.

How Much Does Gate Repair Cost in Colleyville?

Gate Repair Near Colleyville - Our Service Area

We’re based in Colleyville and serve the entire Mid-Cities area, including Gate Repair in Bedford, Gate Repair in Hurst, Keller, Southlake, Grapevine, North Richland Hills, Richland Hills, Watauga, Trophy Club, Haltom City, and Euless. Most Colleyville calls get same-day service. If you’re in a neighboring community, we’ll give you a straight arrival window when you call.

Frequently Asked Questions - Gate Repair in Colleyville

Schedule Your Gate Repair Service in Colleyville Today

Call (817) 242-5426 for a free estimate on your Colleyville gate repair. A live person answers 24/7, and we’ll schedule a visit at your convenience. You’ll get an upfront price, work done by a background-checked technician, and the written 90-Day Done Right Promise on every job. We’ve served Colleyville homeowners since 1984, from home to the gates at the end of every long driveway, and we plan to be here for another forty years.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville since 1984.