Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Hurst
Gate access control in Hurst usually means one of two jobs: either the keypad, intercom, or card reader has stopped talking to the operator, or the gate itself has moved enough on Tarrant County clay that the electronics are working fine but the gate won’t physically swing. We fix both. Ironworks Gate Co. has served Hurst homeowners for over 42 years with gate systems that open when they’re supposed to and stay closed when they’re not. Call (817) 242-5426 and a live person answers, any hour, any day.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Access Control Company
Hurst homeowners call us because we understand what the soil does to a gate before we ever touch the keypad. The neighborhoods off Pipeline Road and Precinct Line Road, the older streets through Colonial Hills and Hurst Hills, the ranch-style homes that went up between 1955 and 1980, they all sit on the same expansive black clay. That clay swells after spring rains and contracts in August. Gate posts move. Frames twist. And an access system that worked fine in October starts faulting in April, not because the board failed but because the post underneath it heaved a half inch out of plumb.
Victor Salinas, who leads our team, trains every technician to check the post before the panel. That’s the difference. A gate access company that only replaces circuit boards will be back on the same driveway in six months. We re-foot the post, re-hang the gate, then calibrate the electronics. Done right, and backed in writing by our 90-Day Done Right Promise, the Keystone Standard.
Hurst customers also tell us they value two things: a live person on the phone at 2 a.m. when a gate won’t close and a technician who shows up in a uniform, background-checked, and treats their property like it belongs to their own mother.
Our Gate Access Control Services in Hurst
Keypad Entry
Most Hurst homes with automatic gates use a LiftMaster, DoorKing, or Ghost Controls keypad. The keypads are durable, but the wiring between keypad and operator runs through conduit that flexes as clay shifts. We replace keypads, re-pull wiring, and set new codes on the spot. For older Hurst homes where the original keypad was mounted on a post that’s now leaning, we re-set the post first, then mount the keypad.
Phone Entry
Phone entry systems let a visitor call your cell phone from the driveway and you open the gate remotely. On rural and acreage properties around Hurst, where the driveway might be several hundred feet from the house, this is often the most practical access solution. We install and service phone entry on Viking, BFT, and Linear systems, and we check that the loop detector under the driveway hasn’t been cracked by shifting clay before we blame the phone relay. A typical phone entry installation in Hurst runs $650 to $1,200 depending on the gate run and power location.
Solar Gate Opener
On Hurst acreage where running mains power to a gate 400 feet from the house costs more than the opener itself, a solar gate opener is usually the right call. We install Mighty Mule and Ghost Controls solar systems sized for wide farm gates and long swing arms. One thing we see often: a solar panel that works great in summer loses charge in winter when ice storms coat the panel or clay runoff splatters mud across it. We mount panels where the sun hits them all day and angle them so winter rain and ice sheet off. A solar gate opener package, installed, typically runs $900 to $1,600 in Hurst.
Video Intercom
Video intercoms are becoming standard on Hurst gates, especially for homeowners who want to see who’s at the drive before they open it. We install and service video intercoms from Elite, DoorKing, and Aiphone. The recurring failure we see is not the camera going bad; it’s the post tilting slowly until the camera points at the sky or the dirt. We re-plumb the post, remount the camera, and re-aim the lens. A basic video intercom install in Hurst starts around $800 and goes up with additional monitors or mobile app integration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re certified to work on nine gate automation brands, and for Hurst customers the ones we see most are LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. We keep common parts for these systems on our trucks, which means most Hurst service calls are finished in one visit. If your keypad is a DoorKing and your opener is a Ghost Controls and the wiring between them was done by whoever built the gate in 1998, we’ve seen that exact setup on a dozen Hurst streets. We know what fails first and we bring the part.
Common Gate Access Control Problems We See in Hurst Homes
- Keypad signals open but the gate won’t move. This is the classic Hurst clay problem. The keypad electronics are fine. The operator’s arm is binding against a post that’s heaved out of line. We re-foot the post, then re-tune the operator limits.
- Solar opener dead after winter. A solar panel covered in ice or splattered with clay runoff produces almost nothing. We reposition the panel, clean the contacts, and check the battery. Most Hurst solar faults are a panel placement problem, not a battery problem.
- Phone entry won’t trigger the gate. The loop detector under the driveway sits in cracked, shifting clay. The wire breaks or the loop shifts out of alignment. We dig, re-set the loop, and re-seal the conduit.
- Video intercom shows sky or dirt. The gate’s motion over years has knocked the camera off a post that’s tilting. We re-plumb the post and re-aim the camera. The camera was never broken.
Pricing for Gate Access Control in Hurst, TX
- Keypad replacement or new keypad install: $250 to $500
- Phone entry system install: $650 to $1,200
- Solar gate opener package, installed: $900 to $1,600
- Video intercom install: $800 to $1,800 depending on monitor count and app integration
- Service call and diagnostic in Hurst: $89 to $149, waived if you approve the repair
- Standing offer: $50 off any repair over $250, and a permanent 5% senior and veteran discount
For an exact quote on your gate, call (817) 242-5426. Estimates are free, and the dispatch is coordinated from our Dallas-Fort Worth office, with crews serving Hurst locally.
We Also Serve Cities Near Hurst
Our Hurst crews regularly work in North Richland Hills, Bedford, Colleyville, and Euless, so if your property sits near the Hurst line, we’re already close by. See our Gate Access Control page for the full scope of our gate services, and our Hurst page for more on how we serve this area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hurst
Why did my gate opener work fine until the last big rain, then start faulting in my Hurst Hills home?
Because the rain swelled the clay under your hinge post and heaved it out of plumb, which bound the operator’s arm and triggered the fault. It’s rarely the board. We re-set the post with a deeper concrete footing, re-hang the gate, and then recalibrate the limits and safety photocells. Call (817) 242-5426 for a free estimate and we’ll check the post before we ever open the panel.
Can I put a solar gate opener on my rural acreage gate in Hurst even if it’s far from my house power?
Yes, and for long driveway runs it’s often the most practical option. We size the panel and battery to the gate’s weight and width, and we mount the panel where it gets full sun even in December. Most solar failures we see in Hurst are a panel that was placed where ice and clay runoff cover it. We fix that on the install. Solar gate opener packages in Hurst run $900 to $1,600 installed.
How do I know if my gate dragging is a hardware problem or a clay-soil post problem in Hurst?
Check the post. If the hinge post leans even slightly, the clay has moved it and the gate is dragging because the frame is no longer square. Hardware problems show as wear on hinges and latches. Post problems show as a gate that dragged after the last big rain. We re-foot and re-plumb the post first, then replace any worn hardware. In Hurst, nearly every dragging gate on the older streets has a post component.
Why does my video intercom go dark or show only the ground sometimes?
Because the post the camera is mounted on has tilted slowly as the clay moved, and the camera’s aim drifted until it points at the dirt or the sky. The camera is usually fine. We re-plumb the post, remount the camera, and re-aim it. If your intercom does this after a storm, that’s the clay heaving the post again. Call (817) 242-5426 and we’ll check it.
Do I really need a loop detector for my automatic drive gate in Hurst?
If you want the gate to open automatically when a car approaches and not close on a car that’s still in the drive, yes. The loop detector senses the vehicle’s metal mass and holds the gate open. On Hurst’s shifting clay, loop wires crack and loops shift out of alignment, which is why we bury them in conduit and re-seal the trench. The loop is the part most gate installers rush, and it’s the part that fails first on clay. We install it right.
Call Ironworks Gate Co. for Gate Access Control in Hurst
If your gate won’t open, won’t close, or opens for everyone but you, call (817) 242-5426. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a Hurst service call, quote the work upfront in writing, and stand behind it with our 90-Day Done Right Promise. Ask about the $50 off any repair over $250 and the 5% senior and veteran discount. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.