Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Motor & Opener in Colleyville: What to Know First
DoorKing gate motor and opener repair in Colleyville typically runs $285 to $1,400 depending on what failed, and most jobs are completed in a single visit. We’re an independent DoorKing service provider, not a factory shop, which means we diagnose honestly and replace only what’s actually worn out. If your DoorKing opener stopped working this morning, call (817) 242-5426 and a live person answers, day or night.
This page is for Colleyville homeowners who already own a DoorKing system or are considering one. Victor Salinas, our owner, grew up here in Colleyville near Bransford Road and has worked on DoorKing equipment in this town for over two decades. We know which models show up on local driveways and which ones fail in predictable ways.
Key Takeaways
- We repair, replace, and install DoorKing gate motors, arms, control boards, and accessories
- Most DoorKing repairs are finished in one visit with parts on the truck
- Upfront pricing agreed before work starts, always
- Every job backed by our written 90-Day Done Right Promise
- We service eight other opener brands, so if DoorKing isn’t the answer, we’ll tell you straight
How DoorKing Products Fail - and How We Fix Them
DoorKing builds solid equipment. The failures we see in Colleyville are rarely mysterious. They’re usually age, weather, or a part that gave out after thousands of cycles. Here’s what actually happens on DoorKing gate motors and openers around here.
- DoorKing 9150 slide operator limit switch drift. The 9150 is common on Colleyville estate lots with heavier sliding gates. After years of operation, the limit switches drift slightly, so the gate stops short or overtravels and slams the end stop. We reset the limits and replace the switches if they’re worn, not the whole board. That’s the fix most companies skip.
- DoorKing 6002/6003 swing gate arm failure from wind load. Colleyville gets genuine north Texas wind, and a solid-panel swing gate catches a lot of it. The 6002 and 6003 arms wear their internal gears faster when wind pushes against the gate while it’s moving. We inspect the gear train, replace worn components with OEM or quality aftermarket parts, and adjust the force settings so the arm isn’t fighting the weather.
- DoorKing 1601 control board relay burnout. The 1601 board has relays that click every time the gate cycles. Ten years of that and the relay contacts pit and burn. The gate won’t open, or it opens and won’t close. We replace the relay or the board with an exact match, then test the full cycle count to confirm it’s the relay and not a wiring short.
- DoorKing MicroPLUS RF receiver interference. The MicroPLUS receiver on older DoorKing systems can pick up interference from nearby garage door openers, security systems, or even LED landscape lighting. Your remote works from the kitchen window but not from the street. We re-tune the receiver, check antenna placement, and if needed swap in a newer DoorKing receiver that filters the noise.
- DoorKing 9150 chain or belt wear from dry Colleyville summers. Heat dries out the lubrication on chain and belt drive components. Once the chain runs dry, it stretches, and the sprockets wear unevenly. We replace the chain and sprockets together, never just the chain, and re-tension per DoorKing’s spec. A fresh chain on worn sprockets fails again in a year.
Our DoorKing Gate Motor & Opener Process
When you call about a DoorKing opener problem, here’s how the job goes from first ring to final test.
- 1
You call (817) 242-5426. A live person answers and asks a few questions: what the gate is doing, what model you have, how old it is. You’ll get a service window that day or the next morning.
- 2
We diagnose on site. The technician checks power, fuses, limit settings, gear wear, and control board behavior. We find the root cause before quoting anything.
- 3
You get an upfront price. We show you exactly what’s failed, what it costs to fix with OEM or quality aftermarket parts, and what the repaired gate will do. You approve the number before any work starts.
- 4
We do the work. Motor replacement, arm rebuild, board swap, gear replacement, wiring repair, whatever the diagnosis calls for. Most DoorKing jobs are done in one visit.
- 5
We test it thoroughly. Full open and close cycles, obstruction reversal, remote range, and safety edge function. We run it at least ten times before we call it finished.
- 6
The 90-Day Done Right Promise kicks in. It’s written, no paperwork to file, no arguing. If something isn’t right, we come back and fix it.
What DoorKing Gate Motor & Opener Costs in Colleyville
DoorKing repair pricing in Colleyville breaks down into a few common scenarios. Here’s what you should expect to see on a written estimate:
- Diagnostic service call: $89 trip fee, waived if you approve the repair
- Limit switch adjustment or replacement: $185 to $340
- Control board replacement (1601 or similar): $380 to $650
- Complete swing arm replacement (6002/6003): $700 to $1,100
- Complete slide motor replacement (9150): $850 to $1,400
- RF receiver replacement and reprogramming: $225 to $400
What moves the price is parts availability, gate weight, and whether the existing wiring needs repair. DoorKing OEM parts cost more than aftermarket, but sometimes they’re the right call for warranty coverage or fit. We’ll lay out both options and let you decide. Call (817) 242-5426 for an exact quote on your DoorKing system. Estimates are free.
Why Colleyville Homeowners Call Ironworks Gate Co. for DoorKing Work
We’ve been serving Colleyville and the surrounding area for over 42 years, since 1984. We’re not a franchise and we’re not a handyman with a truck. We’re a gate company. DoorKing is one of nine opener brands we’re trained and equipped to service, including LiftMaster, Mighty Mule, Ghost Controls, FAAC, BFT, Linear, Viking, and Elite. That matters when a DoorKing system is beyond repair and a different brand makes more sense. We’ll tell you that directly instead of installing another DoorKing that isn’t right for your gate.
Every technician arrives background-checked and in uniform. Every job gets the written 90-Day Done Right Promise. The price is set before work starts. And a live person answers our phone 24 hours a day, 7 days a week. Not a voicemail. Not an answering service. A person who can dispatch a tech to Colleyville the same day.
A gate that works right doesn’t announce itself. That’s the whole idea. But when it stops working, it’s the only thing you notice. We fix that, right and for good.
FAQs
DoorKing gate motor repair in Colleyville typically costs between $285 and $1,400, depending on whether it’s a limit switch, circuit board, complete arm, or full slide motor. The $89 diagnostic fee is waived when you approve the repair. Call (817) 242-5426 for a free estimate on your specific model.
Yes, in most cases. We keep common DoorKing parts in stock, including limit switches, control boards, and RF receivers, so a single visit is the rule, not the exception. If a part has to be ordered, we’ll tell you that before you spend anything and give you a clear timeline.
No. We are an independent DoorKing service provider, not authorized by or affiliated with DoorKing. That means factory warranty claims still go through DoorKing’s process. What we offer is honest diagnosis, realistic parts options, and a written 90-Day promise on our workmanship and the parts we install.
If the motor itself has seized and the gate is more than 15 years old, replacement often makes more sense than repair. If the failure is a limit switch, relay, or receiver, repair is almost always the better call. We’ll show you the costs both ways and recommend whichever serves you better over the next decade, not whichever makes us a bigger invoice.
Yes. We work on DoorKing swing gate arms like the 6002 and 6003, slide operators like the 9150, and the control boards and receivers that run both. We also integrate intercoms, keypads, and battery backups so the whole system works together instead of fighting itself.
Call Ironworks Gate Co. for DoorKing Service in Colleyville
If your DoorKing gate motor is acting up, call (817) 242-5426. A live person answers, 24 hours a day. We’ll schedule a visit, diagnose the problem, give you an upfront price, and stand behind the work in writing. Free estimates, $50 off any repair over $250, and a 5% discount for seniors and veterans, always.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Colleyville and nearby areas.