DoorKing Gate Repair Nationwide

DoorKing Gate Repair in Colleyville: What to Know First

DoorKing gate repair in Colleyville typically runs $225 to $540 for operator and board-level work, and most jobs are finished the same day we arrive. We’re an independent DoorKing service provider, not a factory authorized shop, which means we fix what’s actually wrong instead of swapping parts until something sticks. If your gate won’t open, won’t close, or groans like it’s giving up, call (817) 242-5426 and a real person will answer.

Call (817) 242-5426

This page is for Colleyville homeowners with a DoorKing swing or slide gate that has stopped behaving. We’ll walk through how these machines fail, what repair honestly costs in this market, and why a 42-year-old gate company is the one to call. Victor Salinas founded Ironworks Gate Co. to fix gates the way he’d fix his own, and that hasn’t changed.

How DoorKing Products Fail - and How We Fix Them

• 9200 and 9300 series control boards losing their memory. These boards run on small onboard batteries that keep settings alive when power cuts out. In Colleyville, our summer storms knock power out often enough that a five-year-old battery goes flat, and suddenly the gate forgets its open and close limits. We replace the battery, re-set the limits, and test the board under load. It’s a $90 to $140 fix that a lot of companies misdiagnose as a dead board.
• 1601 and 1602 swing gate operators with stripped limit nuts. These operators use mechanical limit nuts that wear over time, especially on gates that open and close four or five times a day. When the nut strips, the gate doesn’t know where to stop, so it bangs against the post or stops three feet short. We keep OEM DoorKing limit nut kits on the truck and can usually have the operator cycling cleanly within an hour.
• Relay chatter on older 9300 boards driving the motor erratically. When a relay starts to fail, the motor pulses instead of running smooth, and the gate jerks forward in little fits. Homeowners often think the motor is shot. Most times it’s the relay on the board. We’ll bench-test the board, replace the relay if that’s the culprit, and send you home with a working gate for a fraction of motor cost.
• Maglock failures on 6000 series slide gates. DoorKing slide gates often pair with a magnetic lock, and in Colleyville’s clay-heavy soil, the gate posts shift enough over a decade that the maglock armature and magnet no longer line up. The lock fights itself, draws higher current, and eventually burns out. We realign the lock assembly, shim the post if needed, and replace the maglock only when it’s truly dead.
• Gearbox oil leaks on 9150 slide operators. These gearboxes run sealed, but after eight or ten Texas summers the seals dry out and weep oil down the housing. Low oil means metal-on-metal wear, and the gate starts sounding like a coffee grinder. We replace the seals, refill the gearbox with the correct weight oil, and check for gear wear while we’re in there.

Our DoorKing Gate Repair Process

1. 1
   You call (817) 242-5426. A live person answers, day or night. We ask what the gate is doing, what model you have if you know it, and when you need us there.
2. 2
   We arrive and listen. A background-checked technician shows up in a uniform and a stocked truck. We watch the gate cycle, listen to the motor, check the board, and tell you exactly what we found before we touch a single bolt.
3. 3
   You get the price upfront. We settle on a number before any work starts. Not an estimate, not a range, a number. If the repair is over $250, we take $50 off right there.
4. 4
   We fix it with the right parts. OEM DoorKing parts when the job calls for it, quality aftermarket when it makes more sense for an older gate. We’ll tell you which is which and why.
5. 5
   We test it hard. Five or ten full cycles, obstruction tests, force checks. A gate that works once isn’t fixed. A gate that works every time is.
6. 6
   We hand you the written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. That’s the whole guarantee.

What DoorKing Gate Repair Costs in Colleyville

DoorKing repair pricing in Colleyville breaks down by the job, not by the hour. Here’s what we see most often:

• Limit switch or battery replacement: $90-$140
• Control board relay repair: $180-$260
• Full control board replacement (OEM): $320-$540
• Maglock realignment or replacement: $150-$300
• Gearbox reseal and refill: $200-$350
• Hinge or post repair on a DoorKing swing gate: $250-$600 depending on the weld and post condition

What moves the price is part availability, gate weight, and how far the post has shifted over the years. You’ll know the exact number before we start, and estimates are always free. Call (817) 242-5426 and we’ll tell you what we think over the phone.

Why Colleyville Homeowners Call Ironworks Gate Co. for DoorKing Work

We’ve been fixing gates in Colleyville since 1984, before half the subdivisions on Bransford Road were even built. Our techs train on DoorKing equipment specifically, but we service eight other automation brands too, LiftMaster, Mighty Mule, and Ghost Controls among them. That matters because when a DoorKing gate is paired with an aftermarket receiver or a third-party keypad, we don’t blink. We know how the pieces talk to each other.

Every job gets the 90-Day Done Right Promise in writing. Every tech is background-checked and uniformed. And every call gets a live person, 24 hours a day. A gate that works right doesn’t announce itself. That’s the whole idea. When it stops working right, we’re the ones who make it quiet again.

FAQs