Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Repair in Hurst, TX | Ironworks Gate Co.
Our Hurst Gate Repair team fixes DoorKing operators and access systems across the city, and we’ve been doing it long enough to know that most DoorKing failures here start underground, not in the motor. The expansive black-clay soil under Hurst’s older neighborhoods heaves and settles with every wet-dry season, twisting gate posts out of plumb until the rack and pinion on a DoorKing 9050 or 9100 slide operator grinds itself apart. We fix the post first, then the operator. Call us at (817) 242-5426 and we’ll walk you through it.
Ironworks Gate Co. has serviced DoorKing equipment since before most of Hurst’s current gate operators were installed. We carry the boards, limit switches, and gearboxes these systems need, and we’re close enough to be at your driveway quickly. Same-day service is available for most repair calls in Hurst, and every job is quoted and agreed before we turn a single bolt.
Why Hurst Residents Choose Us for DoorKing Service
The short version: we know DoorKing’s slide-motor and keypad lineups well enough to fix the issues Hurst’s clay soil creates. Misaligned racks on DKS 9050 and 9100 slides, limit-switch drift after post movement, keypad grounding failures in wet-season soil. These are not mysteries to us. They’re Tuesday.
Victor Salinas, our owner, grew up in Colleyville and trained in welding and electrical systems at Tarrant County College’s northeast campus before spending more than twenty years on real gates, for real neighbors. He built this company around a simple idea: “A gate that works right doesn’t announce itself. That’s the whole idea.” We operate as an independent DoorKing service provider, not a manufacturer-authorized dealer. That independence means we choose the right part for the failure, not the part that satisfies a franchise agreement. For safety circuits, boards, and limit switches, we install genuine DoorKing components. For steel racks, chains, and posts that take the brunt of Hurst’s soil movement, we use US-made aftermarket steel built to resist what this dirt does.
We also answer our own phone. A live person picks up 24 hours a day, 7 days a week. No voicemail trees, no callbacks on Monday. When a gate is stuck open at 10 p.m. and the dog is making plans, that matters.
Common DoorKing Gate Repair Problems We Solve in Hurst
Here’s what we see most often in Hurst driveways. If your symptoms match one of these, we can usually tell you over the phone what you’re dealing with.
- Rack and pinion misalignment on DKS 9050 and 9100 slide operators. Hurst’s clay soil swells after spring rains and shrinks in August. The post holding your slide operator shifts a half-inch, the chain or rack no longer lines up true, and the gate starts grinding. Replacing the rack without re-plumbing the post fixes nothing for long. We re-set the post, re-bed the rack, and re-align the pinion so the motor isn’t fighting the frame.
- Limit switch drift on 9050 and 9100 models. When a post heaves even slightly, the gate travels a different path than the limit switches expect. The operator over-travels, slams into the end stop, and strains the gearbox. This repeats until the switch is re-set or the gearbox fails. We check the post first, then recalibrate the limits to the gate’s actual travel.
- Ground-fault lockups on DoorKing 1802 and 1812 keypad and telephone entry boards. The older streets near the Trinity River floodplain have buried conduit that collects water. Wiring junctions sit in damp clay for months, and the entry board locks up or resets itself. We find the wet splice, dry and re-seal the conduit, and replace the board if the ground fault already took it out.
- Swing gate arm and torque limiter failures on DoorKing 6003 operators. Winter ice storms in Hurst load latches and hinges with sudden shock. If a wood gate has warped in the summer heat and frozen shut in January, the 6003’s arm or torque limiter takes the hit. We replace the arm with the correct DoorKing part and set the torque limiter to the gate’s actual weight and travel resistance.
- Chain jumping and grinding in wet-dry cycles. Slide gates that ran fine in October start skipping teeth in March, after the posts have moved through three freeze-thaw and rain-dry cycles. The chain tension shifts with the frame. We re-tension the chain after the post work is done, not before, so it holds through the next season.
DoorKing Service in Hurst: What Local Conditions Mean for Your Equipment
Hurst’s mature postwar subdivisions went up largely in the 1950s through 1970s on Tarrant County’s expansive black-clay soils. Colonial Hills, Hurst Hills, Bellaire. Those neighborhoods were built when gate posts were set with whatever concrete was left in the mixer, at whatever depth felt right. The clay underneath swells in wet seasons and contracts hard in summer drought, and that repeated movement torques the post, tilts the gate, and drags the operator out of alignment. In Hurst, a re-hung gate without a re-plumbed and re-footed post will be dragging again within one rain season. This is the single biggest reason DoorKing slide operator failures recur in this market when they wouldn’t on sandier ground in other DFW suburbs.
Our tech pulled a DoorKing 9050 slide operator at a ranch home on Cimarron Trail in Hurst Hills where the gate dragged every spring but ran fine in drought. The post had heaved an inch and a half, kinking the rack. We cored out the old footing, poured a deeper reinforced one, re-laid the rack with crushed-limestone drainage beneath it, and re-set the limit switches. The gate has cycled cleanly through the next wet spring. That’s the sequence: post, rack, limits, test. Skip the post and you’ll be calling us twice a year.
DoorKing Models & Products We Service in Hurst
For Gate Installation - Hurst and repair, we work on the full DoorKing lineup you’re likely to find on a local driveway or in a small HOA entry: the 9050 and 9100 slide gate operators, the 6003 swing gate operator, the 1802 and 1812 telephone entry and keypad systems, and the 1601 and 1602 barrier gate operators. For electronics and safety circuits, we install genuine DoorKing boards and switches. For the steel that touches Hurst’s soil, we use US-made aftermarket racks, chains, and posts that hold up better against clay movement. We keep the common DoorKing boards and limit switches in our service trucks, so most repairs in Hurst happen the same day we arrive.
DoorKing Service Pricing in Hurst
The cost of a DoorKing repair in Hurst depends on what’s gone wrong. Here’s the honest range we usually see:
| Service | Typical Range |
|---|---|
| DoorKing service call and diagnosis (Hurst) | $75-$125 |
| DoorKing operator troubleshooting and repair (parts extra) | $150-$400 |
| DKS 9050/9100 limit switch replacement and recalibration | $180-$340 |
| DoorKing 1802/1812 board replacement with conduit re-seal | $250-$550 |
| DKS 6003 swing arm replacement with torque limiter set | $220-$420 |
| Full post re-plumb, rack re-bed, and floor operator realignment | $600-$1,300 |
Every quote is written and agreed before we begin. If a motor is under 10 years old, we repair. If the gearbox or main board has failed on a 12-plus-year-old operator, we quote a full replacement with modern torque-limiting and battery backup, and we’ll show you the numbers side by side so you can decide. Call (817) 242-5426 for a free estimate. We’ll come out, look at the post and the operator, and tell you exactly what it needs.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - DoorKing Gate Repair in Hurst
Because the post holding your operator is moving, not the motor. Hurst’s black clay swells when it gets wet, and that heave tilts the post, which pulls the rack out of line with the pinion, which makes the gate grind. The fix is to re-plumb and re-foot the post, then re-lay the rack and re-set the limits. If we skip the post work, you’ll hear that grind again next spring. Call (817) 242-5426 and we’ll diagnose it before you spend anything.
Yes. That lockup is almost always a ground fault from buried conduit collecting water. We locate the wet splice, dry and re-seal the conduit, and replace the entry board if the fault already damaged it. This is a known problem in the older Hurst neighborhoods near the Trinity floodplain corridors. Call us at (817) 242-5426 and we’ll trace it.
At least once a year, and more often if your gate is on a street with known clay movement. After any season where the gate has dragged, scraped, or over-traveled, the limits should be re-checked. We set them at the same time we re-level the post, so the gate’s travel path and the switch settings actually match. If your gate is dragging even slightly, that lesson is worth the price of a service call.
We replace the arm with a genuine DoorKing part and then set the torque limiter to the gate’s real weight and travel resistance. If the gate itself is warped or frozen-latch-prone, we’ll address that at the same time, because a stronger arm on a bound-up gate just moves the failure to the gearbox. For a free assessment, call (817) 242-5426.
We don’t just reset to factory settings, because factory settings assume a straight post and a true rack. In Hurst, after we re-plumb the post and re-bed the rack, we calibrate the limits and force settings to the actual gate travel and weight, which is what stops the repeat calls. If someone resets to factory and walks away, the over-travel and grinding come back within a season.
Service Areas Near Hurst
From our shop, we cover Hurst and the surrounding Tarrant County cities: North Richland Hills, Richland Hills, Bedford, Colleyville, and Grapevine. If your DoorKing operator is dragging in any of these towns, we’ll come out and look. You can also read more about our DoorKing sales & service page, or our broader Hurst service area info. For neighbors to the north, see DoorKing service in Colleyville and DoorKing service in Bedford.
Book Your DoorKing Service in Hurst Today
If your DoorKing gate is grinding, dragging, or refusing to move, call (817) 242-5426. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a visit, quote the repair before we start, and stand behind it with our written 90-Day Done Right Promise. Most DoorKing repairs in Hurst are completed the same day we arrive.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst, TX since 1984.