Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Colleyville Homeowners Choose Ghost Controls Gate Repair
Ironworks Gate Co. provides independent Ghost Controls service in Colleyville, with most jobs completed in a single visit. Our technicians work on Ghost Controls openers every week, from ZP2 control board diagnostics to lever-limit switch adjustments, so we carry the parts and familiarity needed to fix your gate right the first time. We are not an authorized Ghost Controls dealer or affiliate. We are a local, independent service company that has worked on these openers long enough to know their quirks inside and out. If your Ghost Controls gate is acting up in Colleyville, call (817) 242-5426 and a live person will answer.
Why Trust Ironworks Gate Co. for Your Ghost Controls Gate Repair?
Victor Salinas founded Ironworks Gate Co. on a simple rule: know the equipment before you touch it. That rule applies to every Ghost Controls opener we service in Colleyville. Our technicians have spent hours inside ZP2 control boards, tracing the 10K resistor bypass circuits and testing the terminals that Ghost Controls uses for its limit and safety inputs. That level of familiarity means we do not guess. We diagnose, we show you what we found, and then we fix it at a price you agreed to before we turned a single bolt.
One detail worth knowing about us: we stock Ghost Controls OEM parts locally. That means a failed ZP2 board, a sheared drive-arm pin, or a worn lever-limit bracket does not mean waiting a week for a shipment. We carry what these openers need, and we know which failures are worth repairing versus which are better served by a full replacement. More than four decades of gate work in Colleyville has taught us how these openers age on North Texas soil, and we apply that knowledge to every Ghost Controls job we take.
Common Ghost Controls Gate Repair Problems We Fix in Colleyville
These are the Ghost Controls failures we see most often on Colleyville driveways, along with the real reasons they happen:
- ZP2 control board failure after a thunderstorm or power surge. The ZP2 board is the brain of most modern Ghost Controls opener kits, including the TSS1 and HDP1. North Texas spring storms bring lightning and power fluctuations that can fry the board’s receiver circuit or scramble its memory. A board that was working fine on Monday can refuse to learn remotes on Wednesday. We test the board on-site, and when it has failed we replace it with an OEM ZP2 unit rather than asking you to buy a whole new opener.
- Lever-style limit switches knocked out of adjustment. Ghost Controls uses a lever-activated limit switch on many of its swing arm openers. High winds, repeated gate slams, or a gate that shifted on its posts can knock that lever off its collar. The symptom is a gate that opens a few feet and stops, or reverses before it reaches the closed position. We reset the collar, adjust the switch position, and re-secure the set screw. It is a fifteen-minute fix when you know what you are looking at.
- Water intrusion in the TSS1 or HDP1 motor housing. North Texas afternoon downpours are sudden and heavy. When the motor housing seal on a Ghost Controls TSS1 or HDP1 gets old or damaged, water gets in and corrosion follows. The gate may run intermittently, hum without moving, or trip its internal thermal protection. We clean the corrosion, replace damaged seals, and test the motor under load before we call the job done.
- Sheared drive arm shear pins on dual gate kits like the TDS2. The TDS2 runs two arms off a single system, one for each leaf. If one leaf is even slightly misaligned, that arm binds and the shear pin snaps. We replace the pin, find the misalignment that caused the bind, and correct it. Replacing the pin without fixing the alignment just means you will be calling us back in a month.
- Gate drift and sag on Colleyville’s shifting clay. The Blackland Prairie clay under Colleyville expands when wet and shrinks when dry. That movement slowly pulls gate posts out of plumb, which stresses the Ghost Controls arm and throws the travel limits out of spec. We relevel the post, re-hang the gate, and reset the operator travel so the whole system works as a unit, not as three separate parts fighting each other.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We stock a range of Ghost Controls OEM parts, including the ZP2 control board, lever limit switch brackets, and shear pins for the TDS2 dual arm kits. When an OEM part is backordered or no longer available for an older Ghost Controls unit, we use quality aftermarket batteries and surge protectors that meet or exceed the original specifications. You will know before we start which parts we plan to use and what they cost.
Here is how we decide repair versus replace: if the board is good, the motor is healthy, and the arm is mechanically sound, we repair. A damaged ZP2 board does not mean you need a new opener. A sheared pin does not mean you need a new arm. We replace a whole opener only when the motor windings are burned, the gearbox is stripped, or the housing is too corroded to hold a seal. We would rather tell you the honest answer than sell you equipment you do not need. Call (817) 242-5426 if you want a straight assessment of your Ghost Controls opener.
Our Ghost Controls Service Process - Step by Step
We keep this process simple because we have done it thousands of times on Colleyville gates:
- 1
Diagnosis. Our technician arrives on time, listens while you describe the symptom, then tests the Ghost Controls opener at each failure point. On a ZP2 board that means checking power at the terminals, testing the learn function, and running the 10K resistor bypass to isolate the board from the arm and limit circuit. You will see what we find. We do not work behind a curtain.
- 2
Upfront price. Before we touch anything, you get a written price for the repair. That price is the price. No surprises at the end of the visit.
- 3
Repair or install. We use OEM Ghost Controls parts where they matter, quality aftermarket parts where they make sense, and we do the work in a single visit for most repairs. The gate gets tested through multiple full cycles before we pack up.
- 4
Test under load. We run the gate open and close repeatedly, watch the limit switch engagement, check the arm travel, and listen for binding. If the gate is on shifting clay, we check the plumb and flag any post movement we see so it does not become a call next season.
- 5
90-Day Done Right Promise. Every Ghost Controls repair we complete in Colleyville is covered by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Ghost Controls Products We Service & Install in Colleyville
Our technicians work on the full Ghost Controls residential lineup, including the TSS1 Heavy-Duty Automatic Gate Opener Kit, the HDP1 Premium Dual Swing Gate Opener Kit, the TDS2 Premium Dual Gate Opener, and the ZP2 control boards that run them. We also handle older Ghost Controls models that are no longer in production but still working on gates all over Colleyville. We keep common Ghost Controls parts on the truck so most repairs do not require a return trip. If your opener is on this list, we can fix it. If it’s a Ghost Controls model you don’t see here, call us anyway. Chances are we have worked on it.
We Also Service These Brands
Ghost Controls is one of nine gate repair automation brands we service regularly. Our technicians are also trained and equipped on LiftMaster, Mighty Mule, and DoorKing equipment, along with FAAC, BFT, Linear, Viking, and Elite. Whatever opener is on your Colleyville driveway, we have likely repaired its sibling in the last month.
FAQs - Ghost Controls Gate Repair Service in Colleyville
No. Ironworks Gate Co. is an independent Ghost Controls service provider. We are not an authorized dealer or warranty center for Ghost Controls, and we do not claim to be. What we are is a Colleyville gate company that has diagnosed and repaired Ghost Controls openers for years, including ZP2 control board failures, lever-limit issues, and TDS2 shear pin breaks. Independent means we answer to you, not to a manufacturer’s service quota. Call (817) 242-5426 for an honest diagnosis.
We use OEM Ghost Controls parts, including the ZP2 control board, lever limit switch brackets, and shear pins, whenever they are available and the right choice for the repair. For components like batteries and surge protectors, we use quality aftermarket parts that meet or exceed the original spec. You will always know which parts we plan to use before we start, and the price is agreed up front. Call (817) 242-5426 if you have a Ghost Controls opener that needs a part identified.
Most Ghost Controls repairs in Colleyville take under two hours on site. A lever-limit switch adjustment or shear pin replacement can be done in thirty minutes. A ZP2 control board replacement typically takes an hour or so, depending on access to the wiring. If a motor housing shows water damage, the cleaning and resealing may extend the visit. We tell you the expected time before we begin, and most jobs are completed in a single visit.
We service the TSS1 Heavy-Duty Automatic Gate Opener Kit, the HDP1 Premium Dual Swing Gate Opener Kit, the TDS2 Premium Dual Gate Opener, and the ZP2 control board used across those systems. We also work on older Ghost Controls models that are no longer in production. If you have a Ghost Controls opener on your Colleyville gate, we can almost certainly service it. Call (817) 242-5426 and tell us the model number you see on the arm or motor housing, and we will confirm.
This depends on the age of your opener and the terms of the Ghost Controls warranty. If your Ghost Controls opener is still under manufacturer warranty, we recommend contacting Ghost Controls directly to confirm how independent service affects that coverage. In many cases, our repair does not void a manufacturer warranty, but the warranty terms are theirs, not ours. For openers that are out of warranty, which is most of what we see in Colleyville, this concern does not apply. Our own 90-Day Done Right Promise covers every repair we complete, regardless of manufacturer warranty status.
Ghost Controls gate repair in Colleyville typically costs between $150 and $600 depending on the specific failure. A lever-limit switch adjustment or shear pin replacement runs at the lower end of that range. A ZP2 control board replacement is usually at the higher end. Motor housing corrosion repair falls somewhere in the middle. Before we start any work, you will have a written price that includes parts and labor, and we honor that price. Standing offers include $50 off any repair over $250, a free second opinion on any written estimate, and a 5% discount for seniors and veterans. Call (817) 242-5426 for an exact quote on your Ghost Controls opener. Estimates are free.
Book Your Ghost Controls Service in Colleyville, TX
If your Ghost Controls gate opener is acting up, call Ironworks Gate Co. at (817) 242-5426. A live person answers around the clock, every day of the year. We will schedule your Colleyville service, show up when we say, and fix it right. A gate that works right doesn’t announce itself. That’s the whole idea.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville since 1984.