Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterMighty Mule Gate Repair in Hurst, TX | Ironworks Gate Co.
Gate Repair in Hurst for Mighty Mule systems usually comes down to one of two things: a control board that’s given up, or a gate post that Hurst’s clay has pushed out of plumb. We’re Ironworks Gate Co., an independent Mighty Mule service provider covering all of Hurst, and we fix both. What sets our work apart here is that we check the post before we touch the motor, because in this town the soil usually started the problem. Call us at (817) 242-5426 and we’ll come look.
Why Hurst Residents Choose Us for Mighty Mule Service
We’ve rebuilt and reprogrammed so many Mighty Mule FM and MM series operators across Tarrant County that we can identify a failing control board or a clay-torqued post just from a gate’s movement. That’s independent expertise earned by daily bench work, not a manufacturer badge. Victor Salinas grew up in Colleyville, not far from Bransford Road, and trained in welding and electrical systems at Tarrant County College’s northeast campus. He’s spent more than twenty years learning the rest of it on real jobs, with real gates, for real neighbors, and he’s known for showing up on time and explaining exactly what needs to be done before he touches anything.
Hurst homeowners call us because we carry OEM-compatible Mighty Mule parts on the truck and we don’t guess. Our techs are background-checked and uniformed, and every job is covered by our written 90-Day Done Right Promise. That’s the Keystone Standard: if it’s not right, we come back and make it right, no paperwork, no arguing.
Common Mighty Mule Gate Repair Problems We Solve in Hurst
- FM-series board corrosion at the ribbon-cable socket. Rain gets past the housing gasket, condensation settles on the board, and the gate starts reversing on its own or stops responding entirely. We see this on FM350 and FM500 units throughout Hurst’s older ranch-style neighborhoods, especially where gates sit exposed to North Texas downpours with no canopy.
- Actuator arm binding from post lean. In Hurst’s clay, a Mighty Mule actuator arm binds when the gate post leans just 2 to 3 degrees, stripping the nylon gear in the FM350 or MM371W before the arm bends. We check post plumb on every call because a 4-inch lean can burn out an arm in under two months.
- MM572W dual-gate synchronization loss. When one leaf drags on concrete heaved by clay expansion, the control board constantly over-currents and reboots. The gate opens one leaf, stops, and beeps. Fixing it right means re-hanging the dragging leaf and re-teaching the limits, not just resetting the board.
- Worm gear damage from Texas heat. Summer heat above 100°F softens the Mighty Mule worm gear grease, causing noisy, jerky travel until the gearbox runs dry and seizes. Hurst gets plenty of triple-digit days, and a gearbox that’s never been serviced will fail faster here than in a milder climate.
- Worn hinges and sagging gates. Most Hurst homes were built between 1955 and 1980, and many swing gates are well past their original service life. Hinges wear, leafs sag, and the opener works harder than it should. We replace hinges, re-align the gate, and take the load off the motor.
Mighty Mule Service in Hurst: What Local Conditions Mean for Your Equipment
Hurst sits almost entirely on Houston Black clay that expands and contracts up to 3 inches between wet and dry seasons. You can see the effect on fence lines along Hurstview Drive, where gates drag after every June rain. What this means for your Mighty Mule opener is simple: the post moves, the gate frame torques out of square, and the actuator arm or gearbox takes the abuse. The clay doesn’t care what brand is bolted to the post. That’s why we’ve learned to check post plumb first on every Mighty Mule call in Hurst, because a gate re-hung without re-plumbing and re-footing the post will be back to dragging within one rain season. In the established neighborhoods like Colonial Hills, Hurst Hills, and Bellaire, the original posts were often set without adequate concrete footings, so the clay wins that fight every time. Fix the post, then fix the opener. Done in that order, the repair lasts.
Mighty Mule Models & Products We Service in Hurst
We service the FM350, FM500, MM371W, and MM572W, along with most other Mighty Mule FM and MM series swing operators still in service around Hurst. We use factory Mighty Mule control boards and actuator arms when they’re still available, but for wear items like gears, hinges, and post brackets, we fit quality aftermarket equivalents that survive clay heave better than the original nylon parts. We keep common Mighty Mule boards, gears, and remote transmitters stocked locally so most Hurst repairs get done in one visit. For Mighty Mule sales & service anywhere in the area, we’re the independent shop that actually carries the parts.
Mighty Mule Service Pricing in Hurst
Most of our Gate Installation in Hurst and repair jobs run between $185 and $495 all-in, depending on whether we’re replacing a control board, a gearbox, an actuator arm, or re-footing a post. A simple limit switch re-set or remote pairing is on the lower end. A full MM series swing arm retrofit with a re-footed post lands higher, typically $700 to $1,450 when the original operator is over 8 years old and both board and gearbox are failing. Every price is quoted and agreed before any work starts, and the estimate is free. We also honor our $50 Off Any Repair Over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (817) 242-5426 for an exact quote, estimates are free.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in Hurst
Because Hurst sits on expansive Houston Black clay that swells when it rains and shrinks when it’s dry. The post shifts, the gate frame torques, and the opener’s safety or overload sensor trips. The fix is re-plumbing the post and re-teaching the limits, not just resetting the board. Call (817) 242-5426 and we’ll check the post first.
Yes, in most cases we can replace just the nylon worm gear or the gearbox assembly on an FM500, and we usually fit a high-torque aftermarket gear that handles Hurst’s clay movement better than the original. If the control board is also failing and the operator is over 8 years old, a new MM series swing arm may be the cheaper long-term fix. We’ll quote both options before any work starts.
Usually a soil problem. One leaf is dragging on concrete heaved by clay expansion, the board reads over-current, and it stops the cycle. We re-hang the dragging leaf, re-plumb the post if needed, then re-sync the limits. If the board has been repeatedly over-currented, it may also need replacement, and we’ll tell you that only after checking the gate itself.
Most straightforward opener repairs and part replacements on an existing gate don’t require a permit in Hurst. If we’re pulling a post, augering a new footing, or running new electrical for an operator, we’ll check current city requirements before we dig. We handle that part, you don’t need to chase paperwork.
Yes. The FM350 accepts a wired keypad through the same terminal block as the push-button entry, and we can add one even if you’re still using the original dip-switch remote. We carry compatible keypads and can wire and program it the same visit. Call (817) 242-5426 to schedule.
Service Areas Near Hurst
Ironworks Gate Co. serves Hurst and the surrounding Tarrant County suburbs, including Hurst service area coverage for all our gate repair work. We also provide Mighty Mule service in Colleyville and Mighty Mule service in Bedford, along with North Richland Hills, Richland Hills, and Grapevine. If your gate is in any of these communities and it’s acting up, call us before you spend another weekend staring at it.
Our tech arrived at a Colonial Hills ranch on Barbara Lane where an MM371W had stopped mid-open and flashed a 3-beep overload code. The gate post had leaned 5 degrees toward the driveway after spring rains. The actuator arm’s clevis pin was bent and the nylon output gear had stripped three teeth. We pulled the post, augered through the clay to a 30-inch footing, set it in rebar-reinforced concrete, then replaced the gear with a high-torque aftermarket part and re-taught the open/close limits. The gate swings without drag a full year later. A gate that works right doesn’t announce itself. That’s the whole idea.
Book Your Mighty Mule Service in Hurst Today
If your Mighty Mule gate is stalling, beeping, dragging, or just not moving at all, call Ironworks Gate Co. at (817) 242-5426. A live person answers 24 hours a day, 7 days a week. We’ll schedule a visit, check the post before we touch the opener, and quote you a price that’s agreed before a single bolt turns. Most Mighty Mule repairs in Hurst are done in one visit, and every job is backed by our written 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.