Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Viking Gate Access Control in Colleyville: What to Know First
We repair, replace, and upgrade Viking gate access control systems across Colleyville, usually completing most keypad, receiver, and control-board failures in a single visit. The work is priced upfront before we touch anything, and most Viking access control repairs on residential gates run between $185 and $525 depending on whether we’re replacing a transmitter, a keypad, or a control board. If you own a Viking gate and the access control is acting up, call (817) 242-5426 and a live person will answer.
This page is for Colleyville homeowners who have a Viking opener or Viking access system on their driveway and want to know what’s failing, what it should cost, and who in town actually works on these units. Victor Salinas runs the service side here at Ironworks Gate Co., and he has been straightening out Viking hardware in Colleyville for over twenty years.
Key Takeaways
- We’re an independent Viking service provider, not a factory-authorized dealer, which means we stock common Viking parts and can say plainly when a part is worth replacing or when the whole unit is nearing the end.
- Most Viking access control problems on Colleyville gates are diagnosed in one visit.
- Your repair price is quoted and agreed before any work starts.
- Every Viking job carries our written 90-Day Done Right Promise.
How Viking Products Fail - and How We Fix Them
Viking access control gear is solid when it’s installed right, but we see the same handful of failures repeat across Colleyville driveways. The patterns are predictable once you know the units.
- Viking K-2 and K-1900 keypads taking multiple presses before they register a digit. These keypads live outdoors, and in Colleyville the summer sun bakes the membrane until the conductive coating under each key breaks down. We see this most often on west-facing gates where the keypad gets six hours of direct afternoon heat. The fix is a new keypad, not a cleaned one, because cleaning the contacts only lasts a few weeks.
- Viking FAX-3 and FAX-5 phone entry systems where callers can’t hear the homeowner, or the homeowner hears nothing at all. The culprit in the majority of these is the relay losing its plating after years of switching, not a failed phone line. We test the relay in front of the homeowner so there’s no mystery about what we’re replacing.
- Viking RC-2A and RC-3 remote receivers dropping programmed remotes after a hard rain. The receiver housing is weather-resistant, not weatherproof, and on Colleyville properties with heavily landscaped entries, sprinkler overspray is the usual killer. We relocate the receiver, seal the new housing properly, and reprogram the remotes, which takes care of it for good.
- Control boards on older Viking swing gate operators failing after a power surge. Colleyville sits in an area with regular summer thunderstorms, and we’ve replaced enough Viking boards burned by nearby strikes to know the signature. If the board isn’t protected, the next surge takes it out the same way. We install surge protection on the gate’s low-voltage side when we replace the board.
- Anti-tailgating sensors and loop detectors on Viking systems that worked for a decade and then started latching open. This is almost always a failing edge sensor, not a programming fault. We test the sensor first, because replacing a Viking controller when the edge is the problem just burns money.
Our Viking Gate Access Control Process
When you call us about a Viking access control issue in Colleyville, here’s how the job goes from the first ring to the final test.
- 1
You call, a person answers. No phone tree, no callback. We ask what the gate is doing, what it’s not doing, and what Viking equipment is on the property.
- 2
We schedule a visit. Most Colleyville calls get a same-day or next-day appointment, and we show up when we say we will.
- 3
Diagnosis before any work. The technician tests the keypad, receiver, wiring, and board, and tells you exactly what’s failed and what it will cost to fix. The price is agreed before a single tool comes out.
- 4
Parts decision, made with you. For Viking equipment, we use OEM Viking parts when the unit is still in production and the part’s price is reasonable. When a Viking part is discontinued or priced beyond sense, we use quality aftermarket equivalents that fit the specs and let you approve before we install.
- 5
The repair and the test. We install the part, reprogram the system, and cycle the gate through a dozen open-and-close runs while you watch.
- 6
Cleanup and the guarantee. The work area is left clean, and every Viking job has our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right.
Every job carries the same standard. Victor likes to say that a gate that works right doesn’t announce itself. That’s the whole idea.
What Viking Gate Access Control Costs in Colleyville
Here’s honest pricing for the Viking access control work we do most often in Colleyville.
| Service | Typical Colleyville Range |
|---|---|
| Viking keypad replacement (K-2, K-1900 series) | $185 - $320 |
| Viking receiver replacement or relocation (RC-2A, RC-3) | $210 - $385 |
| Viking control board replacement | $325 - $525 |
| Phone entry system repair (FAX-3, FAX-5) | $240 - $450 |
| Full access control upgrade (keypad, receiver, remotes, surge protection) | $600 - $1,100 |
The range moves based on the age of the Viking unit, whether the wiring is salvageable, and parts availability. Older Viking control boards that are no longer manufactured cost more because sourcing them is a project in itself. Call (817) 242-5426 for a free estimate on your specific setup. The price you’re quoted is the price you pay, and it’s agreed before we turn a single screw.
Why Colleyville Homeowners Call Ironworks Gate Co. for Viking Work
We’ve been repairing gates in this town since 1984, and Viking has been on a lot of those gates. The difference between us and a general handyman is that our technicians know which Viking parts fail at year four and which ones fail at year fourteen, and they know because they’ve replaced both. When a Viking unit is beyond saving, we’re honest about it, and we service the replacement brands that make sense for Colleyville driveways too: LiftMaster, Mighty Mule, Ghost Controls, and DoorKing.
Every technician is background-checked and uniformed, and every job, Viking or otherwise, is backed in writing. If it’s not right inside 90 days, we return and make it right. No paperwork, no argument. We’ve been in Colleyville forty-two years, and we plan to be here another forty. You’ll see us again around town long after the next company has folded its tent.
FAQs
We’re an independent Viking service provider, not a factory-authorized dealer, so we’re free to tell you honestly when a Viking part is worth buying and when it isn’t, and to use the best available part for the job whether that’s OEM or a quality aftermarket equivalent.
Most Colleyville calls are handled same-day or next-day, and a live person answers our phone 24 hours a day, 7 days a week, so you’ll know your exact appointment before you hang up.
If your Viking unit is still under factory warranty, we’ll tell you before we work on it, and in many cases we’ll recommend you contact Viking first so the covered part is handled under your warranty. If the unit is out of warranty, which is the situation for most Colleyville equipment, there’s nothing to void, and our 90-Day Done Right Promise applies to the work anyway.
Yes. We keep service slots open for emergency gate failures, and a live person answers around the clock. Call (817) 242-5426, tell us what the gate is doing, and we’ll let you know the earliest time a technician can be at your driveway.
If your keypad needs multiple presses or only works when you press the corners of the buttons, the membrane contacts are shot and cleaning won’t fix it for long. We’ll confirm that with a quick voltage test before recommending a replacement, so you’re not paying for a guess.
If your Viking gate access control is acting up, call us at (817) 242-5426. A person answers, the estimate is free, and the price is settled before any work begins.
Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Colleyville and nearby areas.
Before
After
Before
After
Before
After