Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control in Irving, TX typically costs $380 to $1,900 for a complete keypad, intercom, or card reader installation, depending on the hardware and whether we’re upgrading an existing operator or starting from scratch. Most keypad and card reader upgrades in Irving are finished in a single visit. If you’re in Las Colinas, Valley Ranch, or north Irving and your gate keypad stopped talking to the board or your video intercom quit ringing the house phone, call us at (817) 242-5426 and a live person picks up, any hour, any day.
We know Irving’s gates because we’ve worked on them for decades. The ornamental iron swing gates in Las Colinas, the older chain-link and privacy gates in the postwar neighborhoods, the single-phase wiring that ran half of them and now undersupplies a modern opener. Local expertise means we diagnose the right problem the first trip and we quote the price before we touch a single bolt.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Access Control Company
Victor Salinas leads a crew that has spent a lot of afternoons in Irving driveways, particularly around Las Colinas, where hundreds of automated ornamental gates went in during the master-planned development boom and have now reached the same stage of life: worn circuit boards, clouded photo-eyes, and keypads that work when they feel like it.
Homeowners in Valley Ranch, University Hills, and MacArthur Boulevard neighborhoods call us because the work is done right and backed in writing. Every job carries our 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. That applies to a $89 seasonal tune-up and a full access control replacement alike.
Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s. We’re trained and equipped on nine gate-automation brands, so whether the keypad on your driveway is wired to a LiftMaster from 1998 or a newer DoorKing, the correct fix happens on the first visit. And you’ll always reach a live person at (817) 242-5426. Not a voicemail tree, not an answering service.
Our Gate Access Control Services in Irving
We handle the full scope of gate access control in Irving, from a simple keypad replacement to a video intercom with phone entry for a Las Colinas estate gate. Here’s what Irving homeowners most often call us for:
Keypad Entry
We install and repair wired and wireless keypads, including the flush-mount and pedestal models common on Irving’s ornamental iron driveway gates. A keypad that intermittently fails on a hot afternoon is frequently a single-phase wiring issue from the original Las Colinas installation, and we test for that specifically before quoting a repair. Most keypad replacements in Irving run $380 to $850 installed, depending on the keypad and whether we’re pulling new wire.
Remote Control
Adding a remote to an existing gate opener in Irving is usually a straightforward one-visit job. We program and supply remotes compatible with the opener already on your gate, including LiftMaster, Linear, and DoorKing receivers. If your remote worked this morning and quit by evening, the receiver board may have overheated in a west-facing enclosure, which is common on the unshaded side of Las Colinas pilasters.
Phone Entry
Phone entry systems let a delivery driver or visitor call your home from the gate and you open it from the house. For Irving properties with long setbacks, especially along the older estate-sized lots in Cottonwood Valley and around Hackberry Creek, a phone entry unit tied to your landline or cellular network is often the most practical upgrade. We install and service these systems regularly, and we walk you through setup before we leave.
Card Reader
HOA communities in Irving, particularly in Las Colinas where several homes share a gated entrance, often run card reader access. We install proximity card readers, program cards, and integrate them with existing operators. Card reader work in Irving typically runs $550 to $1,400 installed. If your HOA asks for documentation, we’re familiar with the architectural control committee paperwork in Las Colinas and can supply what the board requests.
Video Intercom
Video intercom is the access control upgrade we see most on Irving’s higher-end Las Colinas properties, where homeowners want to see who’s at the gate before opening. We install and service video intercom systems that tie to an in-home monitor or your smartphone. A full video intercom install on an existing gate in Irving generally runs $900 to $1,900, depending on monitor placement and wiring runs. The heat in Irving’s summers makes proper enclosure placement urgent. We mount south- and west-facing electronics with shade and ventilation where possible, because a board that cooks in July fails in August.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
Our technicians carry diagnostic equipment and field replacement parts for the brands on Irving driveways most often: LiftMaster, Linear, DoorKing, Elite, FAAC, BFT, Viking, and Ghost Controls. On access control specifically, we do a lot of Viking and DoorKing keypad and intercom work in the Las Colinas corridor, where those brands were widely specified during original construction. That means we usually arrive with the right board, keypad, or receiver on the truck instead of telling you we’ll order it and come back. A fully stocked truck and a trained tech turn most Irving access control repairs into one visit.
Visit our Gate Access Control service page for more detail on the full scope of access control work we do across the metro.
Common Gate Access Control Problems We See in Irving Homes
- Keypad that reads the code but won’t open the gate. In Irving’s Las Colinas, the original single-phase wiring from the 1980s and 1990s frequently undersupplies a modern operator. The board resets when the relay pulls, and the keypad looks like the problem when it isn’t. We test line voltage before replacing any keypad.
- Gate leaf sag after spring rains. North Texas black clay soil swells with spring moisture and contracts in summer drought. Here in Irving, that yearly shift throws swing gate leaves out of plumb, binds them against the post footing, and stresses the hinges. It recurs annually rather than being a one-time fix, and the access control system often takes the blame when the real problem is alignment.
- Photo-eye lens clouding and board failure on south- and west-facing operators. Summer heat in Irving regularly exceeds 100°F, and an operator box mounted on an unshaded pilaster bakes. Clouded lenses trigger false obstruction faults, and circuit boards cook. We reposition or shade enclosures when we replace them, especially on western exposures in Las Colinas.
- HOA architectural control issues during repairs. Many Irving HOA communities require black powder-coat finish, approved operator brands, and specific masonry repair methods. A tech who doesn’t know those rules loses the repeat contract even if the mechanical work is correct. We know the Las Colinas ACC documentation requirements and we work to them.
Pricing for Gate Access Control in Irving, TX
Gate access control pricing in Irving depends on what you’re installing and what’s already in the ground. A keypad replacement on an existing gate runs $380 to $850. A card reader install runs $550 to $1,400. A phone entry unit runs $650 to $1,300. A full video intercom with in-home monitor runs $900 to $1,900. If we’re pulling new wire, adding a transformer, or replacing an operator, the price adjusts accordingly and we quote it before work starts. A square deal: upfront price, no surprises on the bill. Call (817) 242-5426 for a free estimate, and if you have a written quote from another company, bring it to us for a free second opinion.
Two standing offers apply here in Irving: $50 off any repair over $250, and a 5% senior and veteran discount, always. The $89 seasonal tune-up is a good way to catch access control problems before a keypad fails at the worst possible moment.
We Also Serve Cities Near Irving
Our Irving customers often ask if we go to the neighboring area. Yes. We serve Coppell, Euless, Grapevine, and Bedford from the same dispatch, and scheduling for Irving is coordinated from our Dallas-Fort Worth office. If you live near the Irving line, call (817) 242-5426 and we’ll tell you if we cover your street. For a full picture of our service area, see our Gate Access Control in Irving city page.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
Las Colinas was built out primarily from the late 1970s through the 1990s, and the original LiftMaster, Linear, and HySecurity gate operators installed during that development boom are now 25 to 45 years old. They’re reaching end-of-life at the same time, which makes Irving a disproportionately gate-repair-intensive market compared to neighboring Grand Prairie or Carrollton. If your operator is in that age range and acting up, call (817) 242-5426 for an honest assessment before you throw parts at it.
Yes. We’ve worked under Las Colinas architectural control committee standards many times and we know what the boards look for: black powder-coat finish, approved operator brands, and masonry pilaster repair methods the committee accepts. We’ll prepare the documentation your HOA requests before we start, so the approval moves along without back-and-forth.
It is, and it’s tied directly to the expansive black clay soil under Irving. Spring rains swell the ground and push gate posts out of plumb, then summer drought contracts the soil and shifts them again. The swing gate leaf binds against the footing, hinges stress, and the access control hardware gets blamed for an alignment problem. We correct the posts and re-hang the leaf, then set the keypad and safety edges to work with the corrected geometry. This is an annual cycle in Irving, not a one-time fix.
Yes. Every access control and operator installation we complete in Irving meets UL 325 safety standards, including photo-eye entrapment protection and proper force settings. We’re trained and certified on the automation brands we service, and the 90-Day Done Right Promise covers every access control job we finish in Irving.
Yes. We service slide gates and swing gates throughout Irving, including the long drive runs in Valley Ranch and the ornamental swing gates common in Las Colinas. Slide gate rollers, chains, and track alignment are work we do regularly, and the same access control keypads, card readers, and intercoms integrate with either gate style.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the Dallas-Fort Worth metro.