Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Flower Mound
Gate parts and welding in Flower Mound usually means one of three things: a hinge post that has heaved out of plumb in the clay, a broken weld on an ornamental iron gate that’s been swinging for twenty years, or an operator that needs a bracket or rack reworked. Most jobs run $180 to $650 depending on whether we’re replacing a single hinge or resetting a post in new concrete. We get to Flower Mound homes fast, we quote the price before any work starts, and every job is backed by our written 90-Day Done Right Promise. Call (817) 242-5426 and a live person answers, day or night.
Why Ironworks Gate Co. Is Flower Mound’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been working on driveway and estate gates for over 42 years, and a good share of that work lands in Flower Mound. Homeowners here know what they’re dealing with: heavy ornamental steel, powder-coated finishes, HOA design standards, and soil that moves more than anyone expects. They call us because we show up with a truck stocked for the job, not a clipboard and a promise to come back later.
What sets us apart in Flower Mound is that we understand the gates here specifically. The Blackland Prairie clay under the 75022 and 75028 ZIP codes swells after spring rains and shrinks in August, and that cycle puts lateral pressure on gate posts that lighter-built fences never have to absorb. We’ve seen post footings poured too shallow by original builders, and we know how to fix them permanently rather than patching the symptom. Victor Salinas, who leads our crews, has spent decades learning exactly how far a custom ornamental gate can lean before the operator starts fighting it.
Our technicians are background-checked and uniformed. They work inside your gate as if it were their own mother’s driveway. And when the job is done, you get the 90-Day Done Right Promise in writing. No paperwork on your end. No arguing. If it isn’t right, we come back and make it right. That’s the Keystone Standard on every gate job in Flower Mound, no exceptions.
Our Gate Parts & Welding Services in Flower Mound
This is the Gate Parts & Welding work we handle most often for Flower Mound homeowners. Each one gets the same treatment: upfront price, correct parts, and a weld or a footing that’s built to outlast the next decade of North Texas weather.
Hinge Replacement
Hinges on ornamental iron and steel gates in Flower Mound take more load than most people realize. A 14-foot custom driveway gate can weigh 400 to 600 pounds, and every swing puts shear force on the hinge barrels and the weld points. When a hinge seizes, sags, or cracks, we don’t just swap in whatever fits. We match the barrel size, the leaf thickness, and the powder-coat color to the existing hardware and the HOA’s finish standard. A typical hinge replacement in Flower Mound runs $140 to $320 per hinge, including welding the new leaf to the post or gate frame. Most are done in a single visit.
Post Replacement
This is the most common big job we do in Flower Mound, and the clay is usually to blame. When a hinge post heaves out of plumb, the gate starts dragging, the latch won’t line up, and the operator’s gear or rack gets chewed up trying to compensate. We excavate the old footing, re-pour a deeper base with rebar, and weld new hinge plates in exact alignment. Post replacement in Flower Mound, including concrete work and re-hanging the gate, typically runs $500 to $1,200 depending on the gate’s weight and whether the operator needs realignment afterward. It’s heavier work than a hinge job, but it’s the fix that lasts.
Rail Repair
Cracked or bent rails are common on older slide gates and on swing gates that have sagged over time. We weld cracked rails, reinforce stress points, and straighten bent sections where it’s safe to do so. If a rail is too far gone, we fabricate a replacement section rather than trying to nurse it along. Rail repair for Flower Mound gates usually lands between $200 and $450, depending on how much weld time and steel section the repair requires.
Custom Welding
Sometimes the part that failed doesn’t exist in a catalog. We fabricate replacement brackets, extension plates, picket sections, and custom hinge barrels in-house, then match the finish to the gate’s existing powder coat. Flower Mound HOAs are particular about this, especially along FM 1171 and near Grapevine Lake, where a mismatched repair can draw a violation notice before the gate ever fails again. Custom welding projects in Flower Mound start around $280 and scale with the size of the piece, the complexity of the fit, and the powder-coating work needed to blend it in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re certified and stocked to work on nine major gate-automation brands, including Ghost Controls, DoorKing, and Elite. That matters in Flower Mound because the operators on these older master-planned lots are often paired with heavy ornamental gates, and the operator isn’t the only thing that fails. When a Ghost Controls swing arm binds because the post shifted, or a DoorKing board faults after a hard freeze, we diagnose the mechanical and the electrical side together. We keep common brackets, hinges, and control parts on the truck so most Flower Mound repairs don’t require a second visit or a wait on a parts order.
Common Gate Parts & Welding Problems We See in Flower Mound Homes
- Heaved hinge posts from Blackland Prairie clay. The soil under Flower Mound’s 75022 and 75028 ZIP codes swells and shrinks so aggressively that posts can move a full inch out of plumb in a single season. That tilt binds the gate, strips operator gears, and forces repeated auto-reverse trips.
- Failed welds on aging ornamental iron. Many of the custom gates installed during Flower Mound’s 1990s and 2000s build-out were welded thin at stress points like hinge barrels and mid-rail joints. Twenty-plus years of cycling plus a few hard freezes is enough to crack those welds open.
- Post-freeze operator failures. The February 2021 winter storm gave us a clear look at how many underground and surface operators in Flower Mound weren’t rated for sustained sub-freezing temperatures. Control boards and backup batteries fail first, usually in February or early March.
- HOA finish mismatches after repairs. It’s a Flower Mound thing. A replacement hinge in the wrong black, or a welded patch that isn’t powder-coated to match, gets flagged. We’ve made finish matching a standard step on every ornamental gate repair we do here.
Pricing for Gate Parts & Welding in Flower Mound, TX
Every job is quoted and agreed before we turn a single bolt. That’s the square deal, and it doesn’t change when the invoice comes. The numbers below are what we typically see on Flower Mound gates.
- Single hinge replacement: $140 to $320 installed and welded
- Post replacement with new footing: $500 to $1,200 depending on gate weight
- Rail repair or reinforcement welding: $200 to $450
- Custom fabrication and welding: starts around $280, scales with finish work
- Post realignment without full replacement: $180 to $400
A few things push a Flower Mound job toward the top of these ranges. Post-freeze board replacements add parts cost. Deeper footings for heaved posts add concrete and labor. HOA-matched powder coating adds finish time. We’ll tell you the actual number before we start, and it’s the number you’ll pay. Estimates are free. Call (817) 242-5426 for an exact quote on your gate.
We Also Serve Cities Near Flower Mound
Our crews regularly handle Gate Parts & Welding in Flower Mound and the surrounding communities, including Southlake, Coppell, Grapevine, and Colleyville. If your gate sits on Blackland Prairie clay anywhere in this part of the metro, we’re already familiar with what the soil does to it. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Flower Mound locally every week.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Flower Mound
Your post keeps leaning because the expansive clay under Flower Mound swells when it rains and shrinks when it dries, and that movement pushes the post sideways a little more each season. Welding alone won’t fix it. The post needs to be pulled back to plumb, set in a deeper footing with rebar, and then the hinge geometry needs to be re-welded so the gate hangs true. We do that work routinely in the 75022 and 75028 ZIP codes. Call (817) 242-5426 and we’ll take a look and give you a straight answer on what your post actually needs.
Yes, that’s a standard step on our Flower Mound hinge replacements. We match the finish to the existing gate hardware, not just a generic black. The HOAs along FM 1171 and near Grapevine Lake are particular about this, and we’d rather match it right the first time than see you get a violation letter. We’ll show you the finish before we weld it in. Call (817) 242-5426 for a free estimate.
After a hard freeze in Flower Mound, it can be either one, and sometimes both. Sustained sub-freezing temperatures damage control boards and backup batteries, but a freeze can also heave the post just enough to knock the photocell alignment out, which causes the operator to reverse as if something’s in the way. We check the board and the alignment in the same visit, so you’re not paying for a board you didn’t need. Call (817) 242-5426 and we’ll diagnose it on-site.
Most of the time, just the post. We excavate the old footing, re-pour a deeper base with rebar, weld fresh hinge plates in exact alignment, and re-hang the gate. The frame usually doesn’t need to be replaced unless it’s cracked or rusted through. On Flower Mound’s clay, a single heaved post is the norm. We’ll tell you upfront if your gate’s frame has problems that make a partial replacement a bad investment. Get a free estimate by calling (817) 242-5426.
Yes, in many cases we can add or replace the rack and pinion on your existing slide gate without scrapping the whole operator, especially if the rack itself has bent or stripped from a post that shifted. We realign the gate, weld a new rack section to match, and set the pinion engagement so the operator runs quiet and true. If the operator itself is too far gone, we’ll tell you that honestly. Call (817) 242-5426 for a square quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Flower Mound and the surrounding communities with gate parts and welding since 1984.