Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Watauga
Most gate repairs in Watauga come down to two things: a part that wore out, or a weld that let go. We handle both. A hinge replacement on an original 1980s wooden gate typically runs $220-$390 in Watauga, and a custom weld repair on a steel or iron gate frame starts around $180. If your gate drags at the latch line or a hinge post has started leaning toward the alley, call us at (817) 242-5426 and we’ll send a technician who knows Watauga’s older lots and clay soil, not someone seeing your street for the first time.
We’ve worked the cul-de-sacs off Rufe Snow Drive and the side streets north of Watauga Road long enough to know what the soil does to a gate here. The work is not just replacing a hinge. It’s understanding what that hinge is bolted into.
Why Ironworks Gate Co. Is Watauga’s Preferred Gate Parts & Welding Company
Watauga is a fully built-out city. Most homes went up between the 1970s and early 1990s, and most of the original gates are still standing, or trying to. That means our Gate Parts & Welding work here is different from what we see in newer subdivisions. We’re not swapping parts on five-year-old gates. We’re re-hanging gates that have been through 40 hot summers, dozens of wet springs, and at least one major ice storm.
Ironworks Gate Co. has been at this for over 42 years, founded in 1984, and we’re led by Victor Salinas. Every technician who comes to your home in Watauga is background-checked and uniformed, and works under a simple rule: treat the job like it’s your own mother’s gate. We settle the price before a single bolt is turned. No surprises on the bill, ever. And every job, from a small latch repair off Denton Highway to a full post reset near Capp Smith Park, is covered by our written 90-Day Done Right Promise.
Residents across Watauga call us because the work holds up. A gate we re-hang today should still close square during next spring’s clay swell. If it doesn’t, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Watauga
Hinge Replacement
Watauga’s original gates were almost all hung on strap hinges lagged into cedar or pine posts. After 30-plus years of direct contact with Tarrant County clay, those posts often rot from the inside out at the soil line. A hinge replacement here is rarely just a hinge replacement. We inspect the post, check plumb, and tell you honestly whether the hinge swap alone will do it or whether the post needs a concrete collar reset first. In most Watauga yards we walk, it’s the latter. Hinge work with a solid post runs $180-$280; with a post reset, expect $340-$520 total.
Post Replacement
This is the defining gate repair in Watauga. The expansive clay under this city heaves and contracts with every wet-dry cycle, and 40-year-old wooden posts buried directly in that soil don’t stand a fair fight. We dig out the old post, pour a new concrete footing, set the post plumb using steel reinforcement where needed, and re-hang the gate so it closes true. A standard 4×4 or 6×6 post replacement with concrete in Watauga runs $280-$450, depending on access and how much old concrete has to come out.
Rail Repair
The February 2021 winter storm did a number on Watauga’s older slide gates. Ice loaded the top rails, rusted welds snapped, and the racks fell out of alignment. Since then we’ve seen pinion gears chewing themselves on gates whose owners didn’t realize the rail had shifted. We straighten, re-weld, and re-align racks so the motor isn’t fighting the frame. Rail straightening and re-welding in Watauga typically runs $220-$380, less if we’re already on site for another repair.
Custom Welding
Sometimes the original 1980s iron gate is worth saving, and a bracket, a picket, or a bottom rail just needs to be welded back to service. We do that. We also do the honest math. If a gate frame has rusted through in three places and the hinge posts are gone, custom welding to patch it may cost more than a properly hung replacement. We’ll show you the numbers and let you decide. Custom welding jobs in Watauga generally run $180-$600 depending on the extent of the repair, and we always quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Watauga
Many Watauga gates still run on operators installed in the 1990s. We service and repair the brands we see on these driveways most often: LiftMaster, FAAC, Mighty Mule, and Elite, among the nine major automation brands we’re certified on. When a control board fails on a 25-year-old LiftMaster and the part is obsolete, we’ll walk you through the retrofit options and weld whatever bracket or mount the new operator needs. We don’t tell you to replace the gate when a weld and a new board will do it.
Common Gate Parts & Welding Problems We See in Watauga Homes
- Hinge posts rotted at the soil line. Three to five decades of contact with Watauga’s clay rots wooden posts from the base up. The gate still latches, but the post has tilted two to three inches and the gate drags at the latch side. A concrete collar reset is the fix, not a new latch.
- Slide gate rails knocked out of alignment from ice. Winter Storm Uri snapped rusted rail welds on older slide gates across Watauga. The gate still runs, but the rack no longer lines up with the pinion gear, and every cycle shaves metal off the teeth. We re-align and re-weld before the gear strips completely.
- Obsolete control boards on 1990s operators. When the board dies on a 1995-era opener and the manufacturer discontinued it two decades ago, you have two real choices: a custom welded retrofit bracket and new operator, or a full replacement. We’ll price both and tell you which makes sense for your gate.
- Sagging wooden gate panels. Usually it’s not the panel. It’s the hinge post settling into clay, pulling the top hinge down and the panel with it. We check post plumb before we ever recommend panel work. Resetting the post usually pulls the gate back square for a fraction of the cost of a new panel.
Pricing for Gate Parts & Welding in Watauga, TX
What you’ll pay depends on what the clay has done to your gate, and we won’t know that until we see it. But here are the honest Watauga ranges. Hinge replacement on a solid post: $180-$280. Post replacement with concrete and re-hang: $280-$450. Rail re-welding and alignment: $220-$380. Custom welding repair: $180-$600. If we find a rotted post behind a “simple” hinge problem, we’ll show you before we touch anything and the price is agreed before work starts. Every Watauga job also qualifies for our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (817) 242-5426 for an exact quote, free.
We Also Serve Cities Near Watauga
Our service trucks roll out to Watauga daily, and we cover the surrounding North Tarrant communities as well. If you’re in Colleyville, Bedford, Hurst, or North Richland Hills, the same crews, the same 90-Day Done Right Promise, and the same upfront pricing apply. You won’t get a different company just because you’re ten minutes down the road.
Serving Watauga, TX - Our Local Coverage Area
We’re based in the Watauga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Watauga
Because the post has tilted out of plumb in the clay, not the latch. Watauga sits on expansive Tarrant County soil that swells with spring rains and shrinks in summer drought, and a 40-year-old cedar post buried in that cycle slowly leans two to three inches. The gate still latches because the latch moved with the post, but the gate drags at the ground and the hinges bind. Resetting that post in a concrete collar is the correct repair, and in Watauga it’s usually $280-$450. Call (817) 242-5426 and we’ll check plumb before recommending anything.
We can weld it, and we’ll tell you if we shouldn’t. A single cracked bracket or a broken picket on an otherwise sound 1980s iron gate is a $180-$350 weld repair and it’s absolutely worth doing. But if the frame is rusted through in multiple spots or the bottom rail is gone, you’re looking at a patch job that will fail again, and a new gate becomes the honest, cheaper fix. We’ll show you both numbers before any work begins.
Almost certainly the rail rack shifted. The 2021 ice storm snapped rusted weld points on older slide gates across Watauga, and when the rack moved even half an inch, the pinion gear started climbing. The motor runs fine, but the gate stops short. We re-align the rack, re-weld the rail, and reset the limit. This repair in Watauga typically runs $220-$380. Call (817) 242-5426 and we’ll come look, free estimate.
If the gate is staying, yes. Older Watauga operators installed in the 1990s rarely had loop detectors, and the gate would close on a car sitting on the driveway apron. Adding a loop detector while we’re already retrofitting your new LiftMaster or FAAC board is a sensible upgrade, usually $350-$550 installed, and it’s cheaper to do during the operator swap than as a separate trip later. We’ll factor it into your upfront quote.
Probably not. A gate that sags in the middle but isn’t rotted through usually has a hinge post leaning out of plumb, pulling the top hinge with it. In Watauga’s clay soil, that’s the normal failure pattern. We reset the post, re-hang the panel, and the middle comes back up. A post reset runs $280-$450. A new 6-foot cedar gate panel would run $400-$700. We’ll check the post before we ever suggest a panel. Call (817) 242-5426 for a free look.
Contact Us for Gate Parts & Welding in Watauga
If your gate is dragging, your hinges are screaming, or your post is leaning toward the fence, we’ll send a technician who knows Watauga’s gates and Watauga’s soil. The price is quoted and agreed before work starts, every job is backed in writing for 90 days, and a live person answers the phone 24 hours a day, 7 days a week. Call Victor Salinas and the Ironworks Gate Co. team at (817) 242-5426 for a free estimate. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Watauga since 1984.