Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller usually means replacing a builder-grade operator on an existing ornamental iron gate, not starting from scratch. Most homes in Keller’s master-planned communities were built between 1993 and 2012 with automated driveway gates already hung, and those operators are now 15 to 25 years into a typical 20-year service life. We replace them, upgrade them, or add automation to gates that were installed manual. If you’re in Keller and your gate is binding, faulting, or simply dead, call us at (817) 242-5426 and we’ll send a technician who knows this city’s soil and housing stock better than most.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Installation Company
We’ve been doing this work for over 42 years, and a good portion of our calls take us into Keller’s Hidden Lakes, the 76244 corridor, and the older estate lots off Bear Creek Parkway. The pattern is consistent: iron gates hung in the 1990s and 2000s, operators that were builder-spec rather than commercial-grade, and black clay soil that never stops moving. Our technicians know what to look for on a Keller driveway before they even touch the gate.
Victor Salinas, who leads our team, has spent years working on exactly the kind of heavy ornamental iron gates that dominate Keller’s housing stock. He trains every technician to check the post footing before condemning the motor, because in Keller the motor is usually the victim, not the cause. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback queue. You call, a person picks up, and we schedule a time that works for you.
Every job we complete in Keller carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork. No arguing. It’s the Keystone Standard, and it applies to every gate installation we do in this city.
Our Gate Installation Services in Keller
Swing Gate Installation
Swing gates are the most common gate type we install across Keller, because they match the look of the ornamental iron driveways that builders put in throughout Hidden Lakes and the surrounding subdivisions. A heavy double swing gate on iron posts needs a proper hinge post footing and a correctly sized operator. In Keller’s clay, that footing matters more than anywhere else. A swing gate installation in Keller typically runs $4,500 to $9,800, depending on gate size, iron weight, and whether we’re running new power or reusing existing conduit.
Driveway Gate Installation
Most driveway gate work in Keller happens on properties where the gate already exists. The conversation usually starts with “the gate stopped opening” and ends with a new operator, re-plumbed posts, and fresh safety photocells. When we do install a fully new driveway gate, we plan the footing depth around Keller’s expansive soil profile, not the generic 24-inch standard you’d see in a big-box installation guide. A complete new driveway gate with automation in Keller starts around $6,500 and goes up from there based on the span and ironwork.
Pedestrian Gate Installation
Pedestrian gates in Keller run along the side yards of larger lots, often matching the driveway gate’s ironwork pattern. We install them with the same attention to post depth, because a leaning pedestrian gate looks bad faster than a driveway gate does. Typical pedestrian gate installation in Keller runs $1,800 to $4,200, and most are done in a single visit.
Sliding Gate Installation
Sliding gates are less common in Keller than swing gates, but we do see them on wider driveways and on properties where the driveway slopes toward the house. A sliding gate needs a level track or cantilever system, and in Keller’s clay the track bed has to be overbuilt or the gate will bind within two years. Sliding gate installation in Keller typically runs $5,200 to $11,000, with the higher end reserved for cantilever systems on long spans.
Trusted Brands We Service in Keller
We’re trained and equipped on nine major gate automation brands, and in Keller we see a lot of LiftMaster, FAAC, and Elite operators from the 1990s and 2000s. That matters because a technician who only knows one brand will tell you to replace the whole system when a simple capacitor swap would have fixed it. We stock common parts for Keller’s most frequent failure patterns, which usually means we can complete a repair or installation the same day we diagnose it. If your gate operator is a Viking, a Mighty Mule, or a DoorKing, we service those too.
Common Gate Installation Problems We See in Keller Homes
- Shallow post footings from the original build. Builders in Keller’s rapid 1990s and 2000s buildout often set gate posts in 24-inch concrete footings with no steel sleeve. In Keller’s black clay, that’s not deep enough. The soil swells in spring, shrinks in August, and the post leans. The gate binds. The operator throws a fault code. We fix it by pulling the post, drilling a deeper footing, and setting a steel sleeve so the clay can’t grab the post again.
- Builder-grade operators past their service life. The LiftMaster and FAAC units installed in Keller homes built 1993-2012 are now hitting the 20-year mark. Capacitor failures, burned control boards, and dead limit switches are the usual end-of-life symptoms. This is not a repair that buys another five years. It’s a replacement, and we quote the whole job before we touch a bolt.
- Missing conduit and power runs. Homes in Keller built before about 2010 often lack the underground conduit needed to automate a manual gate. We trench through clay that is rock-hard in August and soupy in May, and we route around existing utilities. This is slow work done carefully, and it’s one of the main reasons a “simple” automation job in Keller can cost more than homeowners expect.
- No entrapment protection from older installations. Gates installed in Keller before UL 325 requirements were enforced usually lack photocells or edge sensors. Any new gate installation we do in Keller includes current-code safety photocells and, where needed, edge sensors. This is not an upsell. It’s the law, and it protects your family and your liability.
Pricing for Gate Installation in Keller, TX
You should know the numbers before you make any decision, so here they are straight. Pedestrian gate installation in Keller runs $1,800 to $4,200. Swing gate installation runs $4,500 to $9,800. Sliding gate installation runs $5,200 to $11,000. A full new driveway gate with automation starts around $6,500. Operator replacement on an existing Keller gate typically runs $1,200 to $3,800, depending on the brand and whether we’re running new power. The price is quoted and agreed before any work starts. If you’d like a second opinion on a written estimate you already have, we offer that free. Call (817) 242-5426 and we’ll walk you through what your specific gate needs.
We also offer a $50 discount on any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Those offers apply in Keller the same as anywhere else we work.
Key Takeaways for Keller Homeowners
- Most gate installation in Keller is replacement and upgrade work, not new construction. Your gate is probably already there; your operator is probably the problem.
- Keller’s expansive black clay soil is the single biggest reason gates fail in this city. Post footings must be overbuilt for Keller conditions.
- Homes built 1993-2012 in master-planned communities like Hidden Lakes often lack conduit for automation. Plan for trenching if you’re adding an opener to a manual gate.
- Every job carries a written 90-Day Done Right Promise. The price is agreed before work starts.
- Call (817) 242-5426 and a live person answers, 24 hours a day, 7 days a week.
We Also Serve Cities Near Keller
Our technicians cover Keller and the surrounding communities of North Richland Hills, Southlake, Colleyville, and Haltom City. If you’re in one of those areas and need Gate Installation in Keller-quality workmanship on a driveway, pedestrian, or security gate, the same team and the same 90-Day Done Right Promise apply. On occasion we’ve spent the entire week moving between Keller and Southlake without leaving the same cluster of iron-gate neighborhoods.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
Your gate is binding in summer because Keller’s black clay soil shrinks as it dries out, which allows your hinge post to lean just enough to put the gate out of square. The operator arm then has to work against the misalignment, and the gate starts throwing fault codes or refusing to close. The fix is re-plumbing the post and setting a deeper footing with a steel sleeve, not replacing the motor. Call (817) 242-5426 and we’ll confirm what your specific gate needs.
Yes, in most cases we can. The main variable is whether your property already has underground conduit running to the gate. Homes built in Keller around 2001 often don’t, which means we’ll need to trench through clay to run power and low-voltage control wire. We’ll also need to check that the existing hinge posts are deep enough to handle the added stress of automation. The total job usually runs $3,500 to $7,500 depending on trench length and gate weight. Estimates are free.
A footing that works in Keller is set below the active clay zone, typically 36 to 48 inches deep, and includes a steel sleeve or bell-bottom base so the expanding clay can’t grab the concrete and lift it. A footing that fails is 24 inches deep, straight-sided, and was poured on a 90-degree August afternoon by a crew that was building 40 houses that same month. In Hidden Lakes and across the 76244 area, we see failed footings from the original buildout on a weekly basis. The fix is to overbuild from the start.
Not necessarily. Winter ice storms in Keller can crack a control board or stress a capacitor without damaging the motor itself. We diagnose the specific failure before recommending replacement. If the operator is a builder-grade LiftMaster from the 1990s or 2000s and it’s already past its 20-year service life, replacement may be the smarter long-term move, but we’ll tell you honestly which way to go. Call (817) 242-5426 and we’ll schedule a diagnostic.
Current UL 325 code requires entrapment protection on automated gates, which means photo-eyes or edge sensors in addition to the basic operator limits. If your existing Keller gate was installed before these requirements were enforced, it probably lacks them. Every gate installation we complete in Keller includes current-code safety photocells and, where required, edge sensors. We’ll show you what we installed and why before we leave the driveway.
Contact Ironworks Gate Co. for Gate Installation in Keller
If your Keller gate is dead, binding, or simply fifteen years past its prime, call us at (817) 242-5426. A live person answers, day or night. We’ll schedule a technician who understands Keller’s clay soil, Keller’s builder-grade operators, and Keller’s iron gate stock. You’ll get a written price before any work starts, and a written 90-Day Done Right Promise when the job is done. That’s the whole arrangement. It’s how we’ve worked for 42 years, and it’s how we’ll work on your gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller homeowners with gate installation and repair across the DFW metro area.