Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haltom City
Gate installation in Haltom City runs between $1,400 and $6,800 for most residential jobs, with commercial rolling chain-link systems typically starting around $3,200 and going up from there depending on track length and automation. We serve the entire 76117 ZIP code, and because dispatch comes straight from our Dallas-Fort Worth office, most Haltom City calls get a technician on-site within one to two business days for scheduled work. If you’re dealing with a failed gate at a salvage yard or body shop on Belknap, that’s a different story. Call (817) 242-5426 and a live person picks up, day or night. This page covers what we install, what it costs in this market, and how Haltom City’s specific soil and commercial mix changes the way a gate should be built and spec’d.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Installation Company
We’ve been doing gate work since 1984, and the jobs we take on in Haltom City tend to be different from what we see ten minutes west in North Richland Hills. That’s not a knock on either town. It’s just the reality of the gate stock. Haltom City has a genuinely unusual mix: post-WWII ranch homes with rear alley swing gates on one block, and rolling chain-link commercial gates at salvage yards and machine shops three blocks over. A company that only hangs ornamental iron in master-planned subdivisions isn’t going to know what to do with a bottom track packed with caliche and brake shavings.
Our crews are background-checked and uniformed, and they’ve worked every gate type you’ll find inside Haltom City’s city limits. Homeowners here tend to have lived in the same house for twenty, thirty, sometimes forty years. They remember the last contractor who showed up late and left a gate that sagged by July. We don’t get too many calls from people shopping around for the lowest bid. We get calls from people who are tired of calling. Every job is protected by our 90-Day Done Right Promise in writing, and our techs follow the same code on their 400th job as on their first: Krafted right, Every time, Your home first, Standing behind it.
Our Gate Installation Services in Haltom City
Driveway Gate Installation
Driveway gates in Haltom City are split between two worlds: the residential swing gates behind older ranch homes, and the sliding and rolling gates in front of the auto-related businesses along Belknap Street and Carson Street. For homes, the main issue is usually the post. Haltom City sits on Blackland Prairie clay that swells when it rains and shrinks in the summer drought, and a gate post set in that soil forty years ago has been quietly moving that whole time. We pour new footings below the active clay zone and set posts with reinforcement so the gate stays plumb season after season.
Pedestrian Gate Installation
Most pedestrian gates in Haltom City are rear alley access gates. They’re the everyday entry: the gate you use to take the trash out, walk the dog, or let the grandkids in from the alley. Because they see constant use, hinge wear compounds fast, and a gate that’s loose at the latch post can become a security issue quickly. We install pedestrian gates in 76117 with self-closing hinges and modern latch hardware that meets current code, so the gate doesn’t just look right for the first month. It still latches two years later.
Sliding Gate Installation
Sliding gates are common on Haltom City’s wider driveways and at commercial properties where a swing gate would eat too much space. New installs almost always get a cantilevered slide system, because wheel-bearing bottom tracks and North Texas clay don’t play well together. We also do a fair number of slide gate retrofits on older commercial properties where the existing bottom track has been grinding through caliche and metal shavings for years. A properly spec’d slide gate with a modern opener ends up needing far less service than what it replaced.
Swing Gate Installation
Swing gates dominate Haltom City’s residential alleys, and the big variable is the operator. A lot of these homes still run legacy operators with control boards that predate modern entrapment protection standards. When we install a swing gate here, we typically pair it with a current LiftMaster or Ghost Controls opener and add photo eyes and edge sensors where the old system had none. The result is a gate that closes like the day it was hung and won’t crush a kid’s bike if someone hits the button at the wrong time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re factory trained on nine gate-automation brands, and for the residential work that dominates Haltom City’s neighborhoods, we lean on a few we trust heavily. LiftMaster openers are our default for swing gates because their myQ capable boards and battery backup handle North Texas thunderstorms without flaking out. We also keep a deep local parts inventory for Ghost Controls systems, which show up on a lot of the farmhouse-style double gates on wider lots. On the commercial side, DoorKing and Elite slide gate operators handle the daily abuse at Haltom City’s industrial properties. If you’ve got a Mighty Mule on a rear alley gate and it’s three years past its last service, we can rebuild it or replace it with something current, same visit.
Common Gate Installation Problems We See in Haltom City Homes
- Heaved posts from Blackland Prairie clay. Expansive clay swells after spring rain and shrinks during summer drought, tilting gate posts out of plumb. The result is a latch that stops catching and hinges that bind. When we install a new gate, we set posts deeper with proper drainage so the freeze-thaw and wet-dry cycles of Tarrant County stop fighting the frame.
- Legacy operators with obsolete control boards. Many Haltom City gates were automated in the 1990s or early 2000s, and those boards don’t meet current entrapment protection requirements. Retrofitting can work on some models, but boards fail more often than they fix. A new opener installed correctly is usually cheaper than chasing intermittent faults on a board nobody makes parts for anymore.
- Commercial bottom tracks packed with debris. Along Belknap and Carson, rolling chain-link gates collect caliche gravel, metal shavings, and brake dust from daily salvage yard traffic. That debris works into the rollers and warps the track, causing the gate to seize halfway through a cycle. Installation of a new rolling gate here means choosing a track and roller system built for that environment, not a generic residential spec.
- Rear alley swing gates on aging wood posts. Most Haltom City homes were built between the 1940s and 1970s, and a lot of alley gates went up in that same era or shortly after. The wood fence posts at the gate opening rot at the base and the whole assembly starts leaning. Setting galvanized steel posts and hanging a square, welded frame solves the problem rather than just propping it up for another season.
Pricing for Gate Installation in Haltom City, TX
Here’s what you can expect to pay in Haltom City. A single leaf pedestrian gate with steel frame and hardware typically runs $400-$900. A residential driveway swing gate, single leaf, built and hung on new posts, starts around $1,400-$2,800. Double swing driveway gates run $2,800-$5,600 depending on width, material gauge, and automation. Sliding gates for residential driveways usually come in at $3,000-$6,800 with a cantilevered track system. Commercial rolling chain-link gates with operator typically start around $3,200 and scale with track length and duty cycle. The price you’re quoted is the price you pay. It’s settled before we turn a single bolt, and every job is backed by our written 90-Day Done Right Promise. Call (817) 242-5426 for a free estimate, or send us a photo of your gate and we’ll give you a range over the phone.
We Also Serve Cities Near Haltom City
Most of our Haltom City customers find us through word of mouth, and we’re glad to work across the Tarrant County line. Our Gate Installation team regularly serves North Richland Hills, Hurst, Keller, and Bedford from the same dispatch office. If you’re in one of those cities and dealing with a gate problem, call the same number and ask for the same promise. Haltom City is our anchor for this corridor, and the standards don’t change when we cross the city limit.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haltom City
If your operator was installed before 2017 or uses a control board that’s no longer manufactured, retrofitting for modern entrapment protection usually isn’t worth the labor and parts cost. The short version: add-on photo eyes and edge sensors can extend the life of some newer boards, but obsolete boards fail safety tests frequently enough that replacement is typically the cheaper answer over two years. We’ll inspect your operator and tell you straight whether a retrofit makes sense. Call (817) 242-5426 and have a live person walk you through it.
Because the problem isn’t the panel, it’s the post. Haltom City’s expansive clay heaves the hinge post out of plumb every wet-dry season, and no amount of hinge shimming fixes a post that won’t stay put. The fix is setting a new post deeper, in fresh concrete with drainage, so it stops moving. Bolt a repaired panel to a moving post and you’ll be re-shimming by next summer.
Yes, in most cases. We stage the work: new posts and track go in first, then the gate panel is built off-site and set in place on a second visit, and the operator gets wired on a third. That way the gate opening stays accessible through most of the install, and daily traffic at your Belknap or Carson Street property isn’t blocked for a full workday. For a commercial quote, call (817) 242-5426 and ask for a site visit.
For a double swing gate on a wide driveway, we usually spec a LiftMaster residential-duty opener with battery backup, and we set the two leaves to open with a slight delay so they clear each other. When the existing gate is heavy steel on wood posts that have already started leaning, the opener isn’t the problem until the posts are fixed first. We handle both sides of that equation in one job.
Haltom City requires permits for new gate construction and for certain electrical work tied to automated systems, and we handle the paperwork as part of the install. Setbacks, fire department access requirements, and easements all get checked before we submit anything. You won’t have to chase city offices; that’s our side of the job. Call (817) 242-5426 for an exact quote on your property.
If you’re tired of a gate that sags, sticks, or simply won’t open when the grandkids pull up, call Ironworks Gate Co. at (817) 242-5426. A live person answers, 24 hours a day, 7 days a week. Senior and veteran discounts apply, and if you already have a written estimate from another company, bring it in. We’ll give you a free second opinion on it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the surrounding Tarrant County area since 1984.