Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bedford
If your gate is dragging the driveway on one side, weld-split at a top rail, or refusing to latch after another Bedford spring storm, we can usually have a technician at your home the same day. Gate post failures and cracked welds are the two most common calls we run in Bedford, and most jobs are done in a single visit with the price agreed before any work starts. Call (817) 242-5426 and a live person answers, day or night. Not a voicemail tree. Not a callback queue. A person who knows gates.
Victor Salinas leads our crews, and every job carries our written 90-Day Done Right Promise. Here’s what Bedford homeowners should know about gate parts and welding before they spend a dollar.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Parts & Welding Company
We have been working on gates in Bedford long enough to know what the soil does to them. This is not new-construction territory. Bedford built out decades ago, and nearly every gate we touch is a repair or retrofit on a home from the 1970s, 80s, or early 90s. The original cedar posts have rotted at the base. The early ornamental iron panels have welds that are forty years old. The hardware is obsolete and the opener is tired. That is exactly the work we are set up for.
Bedford customers call us because we show up when we say we will, we quote a square price before we start, and when we leave, the gate swings true. We back that with a written promise. If something is not right within 90 days, we come back and make it right. No arguing, no paperwork. It is the same standard on the first job as on the 400th.
Our technicians are background-checked and uniformed. They work in your driveway the way they would work in their own mother’s driveway. And when you call, a live person answers at any hour. That matters when a storm has left your gate half-open and your dog is in the backyard.
Our Gate Parts & Welding Services in Bedford
These are the four services we perform most often in Bedford. Each one is priced before we touch a bolt.
Hinge Replacement
If the top hinge post has leaned out of plumb, no new hinge will fix the problem for long. We see this constantly in Bedford, especially in neighborhoods off Pipeline Road where the Fort Worth Clay has heaved shallow footings. We replace worn or seized hinges, but we always check the post first. A hinge is only as good as the steel behind it.
Post Replacement
Bedford’s shrink-swell clay is the single biggest reason gate posts fail here. Most original posts were set 18 to 24 inches deep in plain concrete. That is not deep enough. When we replace a post in Bedford, we drill to 48 inches, bell the bottom with gravel, and pour 4,000 psi concrete that isolates the steel from the clay. Then we weld fresh hinge plates and rehang the panel square. Done right, that post is there for decades, not two or three years.
Rail Repair
Solid infill gate panels act like a sail in Bedford’s spring thunderstorm winds. The top rail takes the flex, and over time the welds crack at the corners. We grind out the failed weld, re-weld with proper penetration, and often add a gusset where the rail meets the stile. If the panel has taken hail damage, we can straighten or replace the affected section.
Custom Welding
Some Bedford gates cannot be saved with a repair. If the frame is too far gone or you want a different configuration, we custom-weld new panels, new frames, new hinge plates, and new operator brackets. We match the style of your existing fence and gate where possible. We have built everything from simple steel driveway gates to ornamental replacements with keypad access and modern safety photocells.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We are trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Bedford because most homes here have openers that are ten to twenty years old and no longer supported by the original installer. We carry common parts on the truck for these brands, which means many repairs are completed in one visit rather than two. If your opener has failed entirely, we can retrofit a new one onto your existing gate, often using the same post and rail.
Common Gate Parts & Welding Problems We See in Bedford Homes
- Clay heave has pushed the hinge post out of plumb. Bedford sits on Fort Worth Clay with a shrink-swell index above 30%. Dry summers crack it, spring rains swell it, and shallow post footings get shoved around. The gate starts dragging on one side and gaps badly on the other.
- Spring thunderstorms crack the top rail welds on solid infill gates. Bedford is squarely in the DFW hail and wind belt. Solid panels catch wind like a sail, and the welds at the top rail corners are the first point of failure.
- Owners shim and re-hang the same gate without resetting the footing. We find this on established streets off Central Drive all the time. Someone has re-shimmed the hinges two or three times since 2021, but the original 18-inch footer was never addressed. The gate sags again every two to three years.
- A power cut after a storm leads to a forced manual opening. When the power is out and the gate will not move, a homeowner or a well-meaning neighbor forces it open without disengaging the operator. That strips the rack and pinion or bends the arm, and the opener will not re-engage.
Pricing for Gate Parts & Welding in Bedford, TX
Here is what Bedford homeowners can expect to pay for common welding and parts work:
| Service | Typical Range in Bedford |
|---|---|
| Hinge replacement (single pair, standard steel) | $180 - $340 |
| Post replacement with 48-inch concrete footing | $450 - $850 |
| Rail weld repair (single top or bottom rail) | $150 - $300 |
| Custom welding (per hour, plus material) | $95 - $140 per hour |
| Gate roller replacement | $120 - $260 |
The price is quoted and agreed before any work begins. No surprise invoice at the end. If a post is honeycombed below the surface or the steel is rusted beyond what we could see, we stop and talk to you before adding a dollar. Estimates are free. Call (817) 242-5426 and we will give you an exact number.
We Also Serve Cities Near Bedford
Our crews serve Bedford and the surrounding Mid-Cities communities, including Colleyville, Euless, Hurst, and North Richland Hills. If you are a few minutes outside Bedford, we can still help. Ask when you call and we will give you an honest arrival window. You can also see our full scope of work on the Gate Parts & Welding page.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bedford
Because the problem is almost never the hinges. It is the post footing. Bedford’s Fort Worth Clay shrinks in drought and swells after rain, and any footing shallower than 36 to 48 inches will move with the soil. We drill to 48 inches, bell the bottom with gravel, and pour 4,000 psi concrete so the post stops moving. Re-shimming only masks the issue. Call (817) 242-5426 for a free footing inspection.
Your opener has a manual release mechanism, usually a small lever or pull cord on the operator arm. Pull it to disengage the gate from the motor, then push or pull the gate open by hand. Do not force the gate without disengaging first. Forcing it strips the rack and pinion or bends the arm, and the opener will not re-engage when power returns. If you are not sure where the release is, call us at (817) 242-5426 and we will walk you through it.
It depends on how far the post leans and what the footing looks like. If the post is out of plumb by less than about an inch and the concrete is intact, we can grind a new hinge plate and weld it in place. If the post leans more than that, or the concrete is cracked or honeycombed, the post needs to be reset in a deeper footing. We will tell you which option applies to your post, and the price before any work starts.
Solid panels with no drainage or ventilation openings catch wind like a sail. In a severe thunderstorm, the panel pushes against the hinge post and the frame flexes. The welds at the top rail corners crack, and eventually the panel separates. We reinforce those weld points and can add proper drainage weep holes to reduce stiffness and surface load. We can also assess whether your panel has taken hail damage and needs straightening or replacement.
Yes. Most 1980s and 1990s gates in Bedford have enough steel to accept current safety equipment. We weld new mounting brackets for photocells, install a keypad, and tie everything into your existing opener or a new one if yours is no longer supported. You do not need to replace a structurally sound gate to modernize the access system. Call (817) 242-5426 and we will give you a free written estimate.
Call Ironworks Gate Co. for Gate Parts & Welding in Bedford
If your gate is sagging, dragging, weld-cracked, or refusing to latch, call us today. A live person answers at (817) 242-5426, 24 hours a day, 7 days a week. We will give you a free estimate, a square price before we start, and a written 90-Day Done Right Promise when we finish. Bedford homeowners have called us for everything from a single hinge to a full custom-welded replacement. We will be there when we say, and we stand behind the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the Mid-Cities with gate repair, parts, and welding since 1984.