Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
Gate parts and welding work in Haltom City usually comes down to one of three jobs: a post that’s rotted or heaved out of plumb, a hinge that’s finally let go after decades of daily swings, or a weld that needs to hold under conditions most residential gates never see. We handle all three, and we do it with a clear answer up front about whether repair makes sense or replacement is the cheaper, longer-lasting fix. If your gate is dragging, sagging, or jammed shut, call us at (817) 242-5426. We dispatch crews to Haltom City regularly from our Dallas-Fort Worth office and we’ll give you a straight answer before any work begins.
What makes Haltom City different from the suburbs around it is the mix of what’s behind those gates. On the residential side, you have post-WWII ranch homes, most built between the late 1940s and mid-1970s, a lot of them with rear alley swing gates hung on wood posts that are now 40 to 60 years old. On the commercial side along Belknap Street and Carson Street, you have auto salvage yards, body shops, and light-industrial yards running heavy-duty rolling chain-link gates every single day. The welding and parts work each one needs is different, and we’ve done both enough times to know the difference before we touch a torch.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company
Victor Salinas leads our shop, and he’s built the company around a simple standard: the gate gets fixed right, and we put that in writing. Our 90-Day Done Right Promise covers every repair and every weld. If something isn’t right, we come back and make it right. No paperwork, no arguing. Haltom City homeowners who’ve been through the cycle of a handyman “fixing” a gate only to have it sag again before the next cold front appreciate that kind of guarantee.
We’re not new to this work. Ironworks Gate Co. has been at it for over 42 years, and our Gate Parts & Welding team has seen every failure mode Tarrant County clay can produce. Background-checked, uniformed technicians show up when we say they will, and a live person answers the phone 24 hours a day, seven days a week. No voicemail trees. No callback queues.
When you call about a gate post leaning in Haltom City, you’re talking to someone who knows what Blackland Prairie clay does to a footing set 18 inches deep in a drought year. That local knowledge means we diagnose correctly the first time, which saves you money and keeps your gate closing true for years instead of months.
Our Gate Parts & Welding Services in Haltom City
Not every gate problem needs a full replacement. A lot of them need one specific part and a good weld. Here’s what we do most often in Haltom City.
Post Replacement
The heavy clay soil under Haltom City swells when it rains and shrinks hard during summer drought. Posts set in shallow concrete footings heave and tilt, and older wood posts rot at the base where water wicks up from the footing. That’s why Post Replacement is the most common call we get from homeowners in the 76117 zip code. We saw-cut the old footing, set new steel posts deeper with rebar, and re-hang the gate so it clears the grade. A post replacement on a typical rear alley swing gate in Haltom City runs $400 to $900 depending on post size and how much old concrete has to come out.
Hinge Replacement
Hinges on 40-year-old gates wear at the pin until the gate sags enough to drag on gravel or concrete. In Haltom City’s industrial corridors, that drag is worse because bottom-track rolling gates are constantly grinding through caliche gravel and metal shavings. We replace worn hinges with weld-on adjustable models that let us correct the gate’s line without re-hanging the whole leaf. Typical hinge replacement runs $180 to $380 per pair, including welding and alignment.
Rail Repair
On rolling chain-link gates along Belknap and Carson, the bottom rail takes abuse that would destroy a residential gate in months. Debris clogs rollers, the rail warps, and the gate starts binding mid-travel. We straighten or replace the rail, clean and reseat the rollers, and weld reinforcement where the rail meets the frame. Rail repair on a commercial rolling gate in Haltom City typically runs $350 to $850, depending on gate width and how much of the rail needs replacing.
Custom Welding
Sometimes the right fix is a brace, a gusset, or a custom bracket that doesn’t exist in a catalog. Our Custom Welding work in Haltom City includes sag-correction struts, reinforcement plates on cracked frames, and custom hinge tabs for gates where the original mounting points have rusted through. We’ve fabricated and welded repair parts on-site for everything from rear alley gates off Haltom Road to heavy commercial gates on salvage yard entrances. Custom welding starts around $150 for small repairs and goes up from there based on the scope of the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
Most of the gate opener boards and motors we see in Haltom City are older units, and a good number of them are obsolete. We’re trained and equipped on nine major automation brands, including Viking, Ghost Controls, and DoorKing, so we can often retrofit a new board into an old housing and save you the cost of a full operator replacement. We stock common parts for Haltom City customers, which means fewer days waiting on a distributor and more days with a gate that actually opens. If your operator can’t be saved, we’ll tell you that plainly and quote a replacement before you spend a dollar on parts that won’t fix the problem.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Post-base rot on 1970s-era rear alley swing gates. Untreated wood posts set directly in concrete footings have been wicking water for 40-plus years. The post rots at grade, the gate sags, and eventually the latch stops lining up. The fix is steel post replacement, not another year of shims.
- Bottom-track roller seizure on commercial slide gates. Auto salvage yards and body shops along Belknap and Carson deposit caliche grit and metal shavings onto gate tracks every day. Rollers bind, the track warps, and the gate jams. Cleaning alone won’t hold; the rollers usually need replacement and the track needs straightening or re-welding.
- Heaved post footings from Blackland Prairie clay shrink-swell. Drought years shrink the clay and leave posts tilted. Rainy years swell it and push them further out of line. The same Haltom City properties come back year after year with latch misalignment until the posts are reset on deeper footings.
- Obsolete opener boards on gates hung before modern safety requirements. A lot of Haltom City gates are old enough that the original operator has no replacement board available. We can often retrofit a current board or motor, but when the gate itself is too far gone, welding new hinges and posts onto it is money wasted. We’ll tell you which situation you’re in.
Pricing for Gate Parts & Welding in Haltom City, TX
Here’s what you can expect to pay in Haltom City for the most common gate parts and welding jobs. These are real ranges from our work in the area, not national averages.
| Service | Typical Range |
|---|---|
| Hinge replacement (pair, welded) | $180 - $380 |
| Post replacement (steel, includes concrete work) | $400 - $900 |
| Rail repair (commercial rolling gate) | $350 - $850 |
| Custom welding (small repair, on-site) | $150 - $450 |
| Sag correction strut (fabricated and welded) | $200 - $500 |
Every price is quoted and agreed before any work starts. You’ll know the number before we touch the gate, and the number won’t move unless we find something structural that changes the scope, in which case we stop and talk to you first. We also offer a Free Second Opinion on any written estimate you’ve received from another company, and $50 off any repair over $250. Seniors and veterans get a 5% discount on every job, always.
We Also Serve Cities Near Haltom City
If you’re in North Richland Hills, Hurst, Keller, or Bedford, we serve those communities as well, but our Gate Parts & Welding in Haltom City crews know this city’s soil, its housing stock, and its commercial corridors better than anyone driving in from across the metroplex. Call (817) 242-5426 and tell us what’s wrong with your gate.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
The Blackland Prairie clay under Haltom City shrinks hard during dry spells, pulling away from concrete footings and letting posts tilt. When rain returns, the clay swells and pushes the post further out of line. The permanent fix is resetting the post in a deeper footing with rebar and proper drainage around the base, not just shimming the latch every June. Call (817) 242-5426 for an exact quote; estimates are free.
Yes. We work on commercial rolling chain-link gates throughout the Belknap and Carson corridors, and the debris problem you’re describing is common at auto-related businesses. We remove the caliche and metal shavings, replace seized rollers, straighten or re-weld the track, and often add reinforcement to the bottom rail. A typical commercial rail and roller repair in Haltom City runs $350 to $850.
If the gate structure itself is solid, welding new posts and hinges can buy it another decade, and we can often retrofit a current board into the old operator housing. But if the gate frame is rusted through or the operator motor is beyond service, replacing the whole system is the cheaper answer over time. We’ll inspect both and give you an honest recommendation before you spend anything. Estimates are free; call (817) 242-5426.
If the post itself is still set solid and only the gate has sagged, a welded sag-correction strut runs $200 to $500 and fixes the problem without concrete work. If the post is rotted or heaved, welding a brace onto it just moves the failure point. We’ll dig down and check the footing before we recommend anything, then quote you a price before work starts. Call (817) 242-5426 for a free estimate.
Yes, and we see a lot of them. The wood gates and posts added to Haltom City ranch homes in the 1970s and 1980s are past their service life, and most have rotted at the post base. We replace the post with steel, re-hang the gate with weld-on adjustable hinges, and add a sag correction strut where needed. Typical cost runs $400 to $900 for a full post replacement with re-hang.
Call Ironworks Gate Co. for Gate Parts & Welding in Haltom City
If your gate is sagging, jammed, or leaning, don’t wait until it won’t open at all. We serve Haltom City with the same standard we’ve held for over 42 years: a square deal, an upfront price, and a written 90-Day Done Right Promise on every job. Victor Salinas and the team at Ironworks Gate Co. will be there when we say we will. Call (817) 242-5426 for a free estimate, and tell us what the gate is doing. We’ll tell you what it needs.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the surrounding Tarrant County communities.