Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richland Hills
Gate hinge replacement and post resetting in Richland Hills typically runs $450 to $1,200 depending on whether the post comes out for a new concrete footing, and most of our calls here are completed in a single visit. The soil under Richland Hills is Blackland Prairie clay, one of the most active shrink-swell soils in Texas, and it moves gate posts every single year. That’s the part most gate repair companies never talk about. We do, because we’ve been fixing it here long enough to know the difference between a cheap hinge swap and a repair that actually stays plumb. If your gate drags, sags, or has a post leaning toward the alley, call us at (817) 242-5426. We’ll give you a straight answer and a written price before any work begins.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Parts & Welding Company
Richland Hills homeowners don’t call us because we’re the cheapest. They call us because they’ve already tried the cheap fix and watched the gate sag again by August. Victor Salinas leads our crew, and he’s built this company around a simple rule: if we touch it, it stays fixed, and if it doesn’t, we come back. No paperwork, no arguing. That’s our written 90-Day Done Right Promise, and it applies to every hinge, post, and weld we do in Richland Hills.
Most of the homes here were built between the late 1940s and the 1970s. The gate posts were set in that Blackland Prairie clay decades ago, many with shallow footings by today’s standards. That’s why Richland Hills keeps us busier with post resets than nearly any other community we serve. We know these streets, from the ranch homes near Baker Boulevard to the quiet blocks west of Rufe Snow Drive. Our background-checked, uniformed technicians arrive when we say they’ll arrive, and we quote the full job before the first bolt turns.
Our Gate Parts & Welding Services in Richland Hills
Gate Hinge Replacement
In Richland Hills, hinge failure is rarely just a hinge failure. When a rear alley gate takes a slow hit from a delivery van or trash truck, the hinge bends while the post absorbs the force. We replace hinges with heavier barrel or weld-on plate hinges sized for the gate’s actual weight, and we check the post while we’re there. On a ranch-style home off a rear alley, we arrived to a privacy fence gate that had been clipped by a delivery van. The wood stile was split at the hinge, and the hinge post had been pushed 4 inches off plumb. We pulled and reset the post with a deeper concrete footing, welded a new adjustable hinge plate onto the post, and replaced the split stile with pressure-treated lumber, so the swing gate cleared the alley without dragging.
Post Replacement
Blackland Prairie clay heaves steel and wood posts out of plumb every dry summer and partially resettles them each wet spring. After enough seasons, the post is done. We dig out the old footing, set a new post in concrete deep enough to resist the shrink-swell cycle, and weld or bolt the gate back square. In Richland Hills this is often the only real fix. Replacing hinges on a post that’s still moving just spends money twice.
Gate Rail Repair
Spring straight-line winds over 60 mph tear rail-to-stile welds on original mid-century iron gates, leaving the top rail hanging free. We grind out the failed weld, square the rail, and lay a proper penetration weld that holds. For wood gates, rail repair here usually means sistering a split top rail or replacing it entirely with pressure-treated stock that won’t rot where the hinge fasteners bite in.
Custom Welding
When a standard replacement part won’t fit a 1960s gate frame, we weld. Custom brackets, reinforced hinge plates, extended latch strikes, ornamental picket repairs. Our welding is done on-site in Richland Hills, matched to the existing metal’s thickness and condition. If a post is salvageable but the original hinge layout won’t take modern hardware, we build a custom plate and weld it on rather than telling you to buy a new gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
Our Gate Parts & Welding team stocks and services hardware for Ghost Controls, DoorKing, and Elite openers, which covers most of the automated gates we see in Richland Hills. We keep common hinge sets, roller hardware, and latch assemblies in our trucks so we’re not making a second trip across the metro for a part. If your gate runs on one of those three brands and the frame, post, or hinge needs work, we handle it in the same visit.
Common Gate Parts & Welding Problems We See in Richland Hills Homes
- Wood stiles split where the hinge fasteners thread in. The split lets the hinge sag even though the hinge itself is fine. We replace the stile or sister a new section behind it, then re-mount the hinge with through-bolts and washers instead of lag screws. This is the signature failure of Richland Hills rear alley gates hit by delivery and trash vehicles.
- Posts moved by clay shrink-swell season after season. Tarrant County’s expansive clay pulls away from the post in summer, the post leans, and then it doesn’t fully come back in spring. A simple hinge swap can’t fix a moving post. We dig it out and set it deeper.
- Original mid-century iron gates with failed rail welds. Many Richland Hills homes still have the original ornamental iron gate hung in the 1950s or 1960s. The steel is often sound; the old welds are not. A proper weld repair is cheaper than replacing the gate, and the original material is often better than what’s sold today.
- Latch and lock misalignment from gate sag. When the gate drops half an inch, the latch no longer strikes. The fix isn’t a new latch; it’s bringing the gate back to level. But on a 1960s gate with an original mortise latch and no modern drop rod, we’ll pull the old latch, bore for a new modern latch, and weld a strike plate so it operates like it should.
Pricing for Gate Parts & Welding in Richland Hills, TX
Hinge replacement in Richland Hills runs $150 to $450 depending on the number of hinges and whether we need weld-on plates. A single post reset with a new concrete footing typically costs $300 to $700. Full post replacement, including the new post and the reset gate, lands between $500 and $1,200. Rail repair runs $100 to $350 depending on whether it’s a weld repair or a wood replacement. Custom welding starts at $150 for small brackets and plates and runs up from there based on the work. Before any work starts, you get the full price in writing. We honor it. If you’d like a free estimate, call (817) 242-5426.
We Also Serve Cities Near Richland Hills
Our crews work throughout the mid-cities area, including Richland Hills, Colleyville, Bedford, Hurst, and North Richland Hills. If you’re a few blocks over the line, the same team, the same pricing, and the same written guarantee apply. Call and we’ll tell you when we can be there.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richland Hills
Because the post itself is moving in the Blackland Prairie clay that swells with spring rain and cracks away from the post in summer drought. Replacing hinges on a moving post fixes nothing for long. The post needs to be pulled, the footing re-dug deeper, and the post reset in new concrete before the gate can be re-hung square. Call (817) 242-5426 and we’ll tell you whether your post is salvageable or needs full replacement.
Usually just the hinges and possibly the post, depending on how hard the hit was. The wood or steel gate panel often survives; what fails is the hinge fasteners, the hinge itself, and the post’s footing. We’ll pull the post if it’s out of plumb, reset it deeper, and replace the hinges with heavier hardware. If the stile is split, we replace that section and re-mount. You only replace the whole gate if the frame is bent or rotted beyond repair. Estimates are free.
A sagging gate panel means the gate frame or stiles have loosened, and the fix is tightening, re-welding, or replacing the panel’s structure. A leaning hinge post means the post is moving in the ground, and the fix is digging out the footing and resetting the post. In Richland Hills, we see both, often together, because the clay moves the post while the panel’s own weight works the joints loose over the same time frame. Before you spend on a new gate, call us and we’ll tell you which one you’re actually dealing with.
Sixty-plus mph straight-line winds load an ornamental iron gate far beyond its everyday stress, and the weak point is always the old weld at the rail-to-stile joint. The weld cracks or tears, and the top rail breaks free. We grind out the old weld and lay a fresh one with proper penetration, then check the other joints for fatigue. If your gate survived one of those spring storms, it’s worth having the welds checked before the next one. Call us and we’ll put eyes on it.
Yes. Most mid-century gates in Richland Hills have metal frames that are still structurally sound, even if the original latch is worn out or the strike no longer lines up. We remove the old hardware, weld or bolt a new modern latch and strike plate in place, and adjust the gate so it catches clean. If the gate sag is what destroyed the original latch, we address that first, so the new latch doesn’t get destroyed the same way. Call (817) 242-5426 for a price.
Get Your Richland Hills Gate Fixed Right the First Time
We know the alleys, the clay, and the 60-year-old gates in this city. We stand behind every job with a written 90-Day Done Right Promise, and a live person answers the phone 24 hours a day, 7 days a week. Senior and veteran homeowners always get 5% off. If you’re tired of watching the gate sag, call Victor Salinas and the team at (817) 242-5426 for a free estimate. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the surrounding mid-cities area since 1984.