Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Richland Hills
Gate installation in Richland Hills typically costs $1,900-$4,800 for a new driveway gate with operator, and most projects are completed within 5-10 business days from site measure to final swing test. If you’re searching for Gate Installation that holds up to Tarrant County clay and 50-year-old post lines, you’ve found the right crew. We’re the Gate Installation team at Ironworks Gate Co., and we know Richland Hills block by block. Call (817) 242-5426 and a live person answers, day or night.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Installation Company
We’ve spent more than four decades watching how Richland Hills gates fail, which is different from how gates fail in Colleyville or Bedford. The soil here does the damage. The Blackland Prairie clay under this city swells hard in wet springs and cracks deep in dry summers. Original posts set in the 1950s and 1960s were rarely sunk past 18 or 24 inches. Half a century of that annual heave cycle has worked those posts loose, and we’re the ones Richland Hills homeowners call when a swing gate finally binds at the latch or drags across the driveway. Victor Salinas, who leads our crew, has pulled enough original Richland Hills posts to know what’s behind them before the shovel goes in.
We answer the phone. That’s the first thing homeowners over 55 tell us they value most. No voicemail tree, no “press 2 for new installation.” A live person answers at (817) 242-5426, any hour. Our technicians are background-checked and uniformed, and they follow the same code on their 400th job as their first: Krafted right, Every time, Your home first, Standing behind it. Every completed installation carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Our Gate Installation Services in Richland Hills
Driveway Gate Installation
A new driveway gate in Richland Hills has to contend with two forces: the soil under it and the sun over it. We spec powder-coated steel and aluminum frames that won’t flex out of square, and we set posts at least 36 inches deep with concrete footings poured past the active clay zone. Whether you want a simple single swing across a standard ranch driveway or a full-width double gate for a wider lot, we measure on site and quote a fixed price before any work begins.
Pedestrian Gate Installation
Pedestrian gates in Richland Hills usually live alongside a driveway, or along a side yard facing the street. We install walk gates with self-closing hinges, keyed or keypad entry, and frames sized to your opening, not whatever the big-box store had in stock. On homes with original 1960s brick columns, we can anchor new wick gates to the existing masonry rather than digging fresh post holes, which saves your established shrubs and keeps the yard intact.
Sliding Gate Installation
For shorter driveways where a swing gate would eat half the turnaround space, a cantilever or V-track sliding gate is often the better call. Richland Hills lots are compact, and many driveways rise straight from the street into a carport or garage. A sliding gate rides on rollers above the ground line, so it’s less bothered by the clay movement that heaves swing gate posts. We install tracked and cantilever systems, including heavy-duty steel frames able to span wide openings.
Swing Gate Installation
Swing gates are the classic Richland Hills look, especially the ornamental steel double gates still found on mid-century ranch homes. But this is the city where swing gates sag faster than almost anywhere else in Tarrant County. The reason is always below ground. We never hang a new swing gate on old posts without first checking plumb and footing depth. More than half the swing gate installations we do in Richland Hills include pulling at least one original post and setting a new one properly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
Whatever opener you choose, our technicians are factory-trained on it. We install and service DoorKing, Ghost Controls, and Elite systems regularly in Richland Hills, along with six other major brands. For long driveways far from a power source, we frequently pair a heavy-duty Ghost Controls or Mighty Mule operator with a solar panel sized correctly for the gate’s weight and cycle count. We keep common parts on our trucks, which means fewer return trips and faster completion for Richland Hills customers.
Common Gate Installation Problems We See in Richland Hills Homes
- Original posts heaving out of plumb. The Blackland Prairie clay swells in spring and cracks in summer, moving posts a little every year. After 50 or 60 years, a gate that once swung true now drags or refuses to latch.
- Rear alley gates beat up by vehicles. Richland Hills still runs trash trucks and delivery vans down its mid-century alleys. Those wooden privacy fence gates take low-speed hits that bend hinges, split stiles, and knock posts off plumb. It’s a wear pattern we see constantly here and almost never in North Richland Hills.
- Undersized solar panels on wide gate operators. A long driveway gate with a heavy operator needs real panel surface area. After a spring hail storm reduces panel output, an undersized system stops holding charge, and the gate goes dead at the worst time.
- Inherited problems from previous handyman work. We often replace gates that were hung on shallow footings or undersized hinges just a few years ago. The gate looks fine for a season, then the same clay movement starts the sag all over again.
Pricing for Gate Installation in Richland Hills, TX
A single residential swing gate with operator in Richland Hills typically runs $1,900-$3,200 installed. Double swing gates run $3,000-$4,800 depending on width, material, and operator. A sliding gate usually falls between $2,800 and $5,500, since the track system and heavier frame add cost. Pedestrian gates run $600-$1,400. Post replacement, when old footings are found to be too shallow, adds $300-$700 per post. Every price is quoted and agreed before any work starts. You’ll know the number before we turn a single bolt. Call (817) 242-5426 for a free measure and written estimate.
We Also Serve Cities Near Richland Hills
While this page is built for Richland Hills homeowners, our crews also install gates in Colleyville, Bedford, Hurst, and North Richland Hills. If you’re just across the city line, call and ask. Same team, same written 90-Day Done Right Promise, same live person on the phone at (817) 242-5426.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Richland Hills
Swing gates in Richland Hills sag more because most of them hang on original posts set 18 to 24 inches deep in Blackland Prairie clay, which has been shrinking and swelling every year since the 1950s. Those shallow footings gradually lose their grip, and the gate leans at the latch side. Newer subdivisions in North Richland Hills were built with deeper footings and post-tensioned slabs, so their posts don’t move the same way. When we install a gate here, we pull the old post and pour new footings at least 36 inches deep, below the active clay zone. Call (817) 242-5426 and we’ll check your posts for free.
Yes, and solar is often the smartest choice for long driveways where running conduit would mean trenching hundreds of feet. But the panel must be sized for the operator’s draw and the gate’s weight. A heavy-duty double gate needs real panel surface area, not a single 10-watt panel. We size solar systems for the specific operator and cycle count, and we account for Texas hail season. Call (817) 242-5426 for a free solar feasibility assessment.
For rear alley gates that take repeated low-speed vehicle contact, we recommend a steel frame with welded gussets at the corners and a heavy-duty post hinge system, rather than a standard wood privacy gate. Steel resists the bending and stile splitting we see constantly on wooden alley gates in central Richland Hills. The posts still need to be set deep, but the gate itself will survive years of trash truck bumps without structural failure. Call (817) 242-5426 and we’ll quote a steel alley gate built for the traffic it faces.
In Richland Hills, we set gate post footings at least 36 inches deep, which puts the bearing point below the most active shrink-swell zone of the Blackland Prairie clay. Anything shallower, and you’re setting the next homeowner up for the same sag you’re fixing now. For wide double gates or heavy ornamental steel, we may go deeper or use larger-diameter concrete footings. Every footing is inspected before concrete is poured. Call (817) 242-5426 for a free post-depth evaluation.
For a wide driveway in Richland Hills, a slide gate is usually better if you have the side room for it to travel, because it isn’t fighting the soil movement under its hinge posts. A double swing gate works well on a wide opening but puts more load on two separate posts that both must be set perfectly plumb and deep. If your driveway is wide but short on side clearance, double swing is the answer with properly set posts. We’ll tell you honestly which one fits your lot. Call (817) 242-5426 for a free site measure.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the surrounding metro.