Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Richland Hills, TX
A gate that drags across the driveway or refuses to close is more than a nuisance in Richland Hills. On a Tuesday morning when you’re already late, it’s a wall between you and the rest of your day. Most gate repairs in this city come down to two things: posts that have shifted in the Blackland Prairie clay, or a motor that has finally quit after years of service. Ironworks Gate Co. repairs both, and we typically reach Richland Hills homes the same day you call (817) 242-5426.
We are a dedicated gate specialist, not a general handyman who does gates on the side. When our truck pulls up, we’ve seen your exact problem before, likely on a street much like yours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Richland Hills Homeowners Choose Ironworks Gate Co.
Forty-two years of doing one thing well tends to build a certain reputation. In Richland Hills, where homes are older and expectations are firm, homeowners call us because they want the gate fixed correctly and never want to think about it again. We work regularly in neighborhoods like Richland Hills Terrace and the streets off Rufe Snow Drive, and we understand that a sagging gate on a 1960s ranch house is almost always a post problem, not just a hinge problem.
Every call is answered by a live person, 24 hours a day, 7 days a week. The technician who arrives wears a uniform, has passed a background check, and works under the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. It is the same standard on our 400th job as our first. And when we finish, we hand you a written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions.
Victor Salinas, who leads our team, still treats every gate as if it were hanging at his own mother’s house. That’s the only approach that has kept us in business this long.
Gate Repair Services We Offer in Richland Hills
We handle the full scope of gate work, from a bent hinge to a complete driveway entry with automation. Here is what that looks like for Richland Hills homeowners.
Gate Repair
We straighten, weld, reset, and rehang gates of every material. Most repair calls in Richland Hills involve posts that have moved out of plumb or hardware that has finally worn out after decades in the Texas weather. We repair the gate, not just patch it.
Learn more about our Gate Repair in Richland Hills.
Gate Installation
A new gate starts with a measured site visit and a written price before any work begins. We build and hang swing gates, sliding gates, and ornamental iron that suit the scale of Richland Hills lots and the style of its mid-century homes. The price is agreed before a single bolt is turned.
Learn more about our Gate Installation in Richland Hills.
Gate Motor & Opener
We service and install motors and openers from LiftMaster, FAAC, Mighty Mule, and Elite. If your gate opens halfway and stops, or the remote works only from the driver’s seat, we trace the problem to the motor, the board, the limits, or the power supply. The correct fix is made on the first visit.
Learn more about our Gate Motor & Opener in Richland Hills.
Gate Access Control
Keypads, intercoms, vehicle sensors, and telephone entry systems all fall under access control. We wire, program, and repair the systems that let you in and keep others out. If a keypad has gone dark or a sensor has stopped reading, we handle that.
Gate Parts & Welding
Sometimes the frame is solid and the motor is fine, but a hinge has sheared or a weld has cracked. We fabricate and replace parts on site, including steel work that keeps the original character of an older gate intact. A gate from the 1960s can often be saved, and that’s usually the better path.
Neighborhoods We Serve in Richland Hills
We cover the entire city, from the streets around Richland Elementary to the homes east of Highway 121 and north toward Baker Boulevard. Here are a few neighborhoods where we work regularly.
- Richland Hills Terrace
- The neighborhoods off Rufe Snow Drive
- Homes near Richland Park
- The alley-served residential blocks east of Grapevine Highway
- Streets around Holiday Lane and Baker Boulevard
Typical response time for gate repairs in Richland Hills is same-day in most cases. Call us by mid-afternoon and there’s a good chance we can have your gate working before dinner.
Why Richland Hills’s Climate & Housing Affect Gate Repair
Richland Hills is a compact, built-out post-WWII suburb. The majority of its homes went up between the late 1940s and the 1970s, and a large share still have the original steel or wood gate posts set in Tarrant County’s Blackland Prairie expansive clay. That clay is the reason so many gates in this city lean, drag, and bind. It swells with spring rain and shrinks and cracks in the summer heat, and every cycle pulls the post a little farther out of plumb. We reset more posts in Richland Hills than in the newer subdivisions just across the line, where footings are younger and deeper.
But this city has another wear pattern that is practically its signature: the rear alleys. Trash trucks and delivery vehicles use those alleys daily, and the wooden privacy fence gates lining them take slow-speed hits that bend hinges, split stiles, and knock posts off plumb. It’s a specific type of damage we see on nearly every alley-served block in Richland Hills, and it’s one reason calls here often end in a post-and-frame rebuild rather than a simple hardware swap.
Pricing for Gate Repair in Richland Hills
We quote every job upfront, in writing, before any work starts. You will know the price before we pick up a tool, and that price does not change. Here are typical ranges for common gate repairs in Richland Hills:
- Hinge replacement: $85-$180
- Post reset and re-concrete: $225-$450 depending on depth and access
- Weld repair on ornamental iron: $95-$250
- Motor or opener replacement: $450-$1,100 depending on brand and gate weight
- Full wooden gate rebuild on an alley fence: $380-$850 depending on material
We offer a $50 discount on any repair over $250, free second opinions on any written estimate, and a permanent 5% discount for seniors and veterans. The price you agree to is the price you pay. Call (817) 242-5426 for an exact quote.
Service Area - Cities Near Richland Hills
Ironworks Gate Co. serves Richland Hills and the surrounding Tarrant County communities. We also work regularly in Colleyville, Bedford, Hurst, and North Richland Hills. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Richland Hills locally.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richland Hills
Most gate repairs in Richland Hills run between $85 and $450, with complete motor replacements reaching $1,100 or more depending on the brand and gate weight. The biggest variable is whether the post itself has shifted in the clay and needs to be pulled and reset, which adds labor and concrete work. We quote every job in writing before we start, so there are no surprises. Call (817) 242-5426 for a free estimate.
In most cases, yes. We are a local gate specialist serving Richland Hills, not a shop that cycles through a four-county service area. If you call before mid-afternoon, we can often have a technician at your gate the same day, with the truck stocked for common repairs like hinge replacement, post resets, and opener swaps. Call (817) 242-5426 and a live person will tell you exactly when we can be there.
In Richland Hills, the culprit is almost always the Blackland Prairie clay under the posts. The soil swells when it rains and shrinks when it dries, and over years that movement works the post loose so the whole gate frame settles out of square. Tightening hinges only masks the problem. The correct fix is pulling the post, setting a proper concrete footing, and rehanging the gate level. We do that work regularly in every Richland Hills neighborhood from Richland Hills Terrace to the alleys off Grapevine Highway.
We work on both, and in Richland Hills we see a lot of alley gate damage. Trash trucks and delivery vehicles clip those wooden fence gates constantly, bending hinges and splitting stiles. We rebuild, rehang, and replace alley gates all over the city, including the streets served by rear alleys east of Rufe Snow Drive. A gate that has been hit a few times is usually better rebuilt than patched again.
A full installation includes site measurement, selection of the gate style and material, setting posts with proper concrete footings, hanging the gate, and installing any automation you choose, including motor, remote, and safety edges. We handle the entire job from start to finish and quote it in writing before any work begins. If you want a free measure and written price, call (817) 242-5426.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and surrounding Tarrant County communities for over 42 years.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram